Used Centrifuges for sale (25)

Condition: used, Dry cleaner/ Friction cleaner with 110 kW drive power. Bsbu Rb Nswbg Iksdowl Throughput max. 4t/h depending on type of plastic and material thickness

Year of construction: 1996, Condition: used, drum diameter 382 mm drum height 250 mm filling amount 40 kg wall thickness of drum 13 mm drum revolutions 2850 U/min Capacity 1200 l/h voltage 400 V total power requirement 5,0 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1,90 x 0,70 x 1,65 m Centrifuge with water treatment - Factory No.: 36229 / 05 - Machine ON: 41,349 h - Timer Bobu Rb Nswa Uhisdewl

Year of construction: 2000, Condition: like new (used), Used Westfalia model SC 35-06-177 stainless steel clarifier centrifuge. Has intermittent solids discharge with self triggered ejection and stainless steel sludge pot. Paring device for light phase, clarifier design. Belt driven by Loher el. motor 18,5 kW/50 Hz/400V/IP55, maximum bowl speed 7270 rpm. Main switch board with integrated control panel included. Rated capacity approximately 20000 liters/hour, the jacketed hood with two coolant feeds. Bobu Rjk N Aqpjb Ndowl

Condition: like new (used), Year of construction: 2022, operating hours: 63 h, Mobile compact centrifuge including buffer storage for dirty water, max. acceleration forces 1810 g, nominal speed 2900 rpm. drive power 4 kW, inner diameter of drum 380 mm, Bwsbu Rb Njvmywdsdel volume of dirty water tank approx. 220 liters, feed pump: pneumatic double diaphragm pump, cycle-controlled, supply line: 400V - 16A - 50 Hz, control: PLC Siemens built-in agitator with dirty water tank, plug-and-play system: ready for use within minutes.

Condition: good (used), Year of construction: 2012, screw diameter: 630 mm, overall weight: 4,400 kg, peeling centrifuge 3000 rpm , 630 mm diameter bowl Bebujvm Ur Ae Rb Ndowl

Condition: used, Used Alfa Laval model GS2-200 stainless steel decanter centrifuge. Bowl measures approximately 280mm diameter. Maximum solid density 3.0kg/dm3. Bwobu Rbovtn D Sj Ndjl Unit includes main drive motor and back drive. Includes control panel.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Bwebu Rb Newbg Hmsdel

Year of construction: 2001, Condition: good (used), Hettich Rotina 35 R refrigerated centrifuge Large, easy-to-read display During the run, the ACTUAL status of all parameters is displayed. Speed RPM: Input in steps of 10. Relative centrifugal acceleration RCF: Input in steps of 10. Switching function RPM/RCF: By entering the radius r/mm Calculate and display the speed or RCF. Time: Input in minutes and seconds, max. 99 min, 59 sec. Temperature: Input in steps of 1 from -20°C to +40°C Speed: n= 15,000 min-1 / RCF 24,400  Temperature in the spin chamber: infinitely variable from -20°C to +40°C 1-99 min, ∞ (continuous run), IMPULSE key (for short run in seconds) Dimensions (HxWxD): 380 x 468 x 695 mm Voltage: 208-240 V  Weight approx.: 70 kg incl. rotor 1717 / 10x60g / 5000 RPM Item condition: used  Scope of delivery: as shown Bwobu Rb Nohtuwledsl Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2012, Condition: ready for operation (used), Max. rotational speed: 2500/min, max. capacity: 80kg, inner drum diameter/ height: 500/ 603mm, wall thickness: 16mm, operational hours counter: a few hundred. Bwjbu Rohbvnyob Ndol

Condition: reconditioned (used), Fully refurbished and tested. Very good condition. Bsbu Rouccrkob Ndowl Complete with tools for bowl cyclone foundation plate vibration damping feet owm - operating water module controlcabinette (not tested or reconditioned)

Condition: ready for operation (used), Drum centrifuge, Centrifuge, Chip centrifuge, Vertical centrifuge, WMV AZ 600, Used machine Manufacturer: WMV Apparatebau Model: AZ 600 Overall dimensions: Ø850 x 1100 mm (height) Drum: Bsbu Rou Hkdreb Ndewl removable 100 l capacity Speed: 750 rpm Load capacity: 150 kg Electrical specifications: 400 V; 7.8 A The picture shows 2 centrifuges, but the price is per piece

Condition: new, Cleaning centrifuge including buffer storage for dirty water, agitator and double-diaphragm compressed air pump. - new machine - numerous other variants and special designs on request Machine type: process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS38 PE Application: vibratory finishing technology, general solid-liquid separation, coolant processing, wet blasting, processing of industrial liquids Benefits: - High discharge capacity due to acceleration forces acting in the system of more than 1800 times the acceleration due to gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems from the field of vibratory finishing, drying and process water technology that are exactly right for your application. From development to production: We supply all our products from a single source and everything is "Made in Germany". Bwjbohrh Ntou Rb Ndsl ----- Please contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation takes place by means of telecommunications (email, fax, telephone, message portal), where we first make you a non-binding offer, in which we also inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase/conclusion of contract takes place.

Year of construction: 2008, Condition: new, THE MACHINE IS UNUSED THE MACHINE IS NEW Bwobujh If Nxj Rb Ndsl

Year of construction: 2021, Condition: ready for operation (used), Suitable for the separation of free oils from cooling lubricants, max. output: 500l/h, max. liquid temperature: 70°C, pH value: 6-9, length: 620mm, width: 510mm, height: 1140mm, weight: 60kg, with documentation. Bobjk E Nccou Rb Ndswl

Condition: excellent (used), operating hours: 1,400 h, FESX510S-34C-50 with only 1400hours runtime. Complete system with rigg, piping, cables, control, starter and motor. Very good condition. Bobueuccu Sj Rb Ndowl

Year of construction: 1989, Condition: ready for operation (used), Drum centrifuge, Centrifuge, Chip centrifuge, Vertical centrifuge, Basket Centrifuge, WMV AZ 600 Bwobu Rbjuviuas Ndsl Drum centrifuge, Centrifuge, Chip centrifuge, Vertical centrifuge, WMV AZ 600, Manufacturer: WMV Apparatebau Model: AZ 600 Overall dimensions: Ø850 x 1100 mm (height) Drum: removable 100 l capacity Speed: 750 rpm Load capacity: 150 kg Electrical specifications: 400 V; 7.8 A The picture shows 2 centrifuges, but the price is per piece

Year of construction: 2022, operating hours: 0 h, Condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Bsbu Rof Sqfqob Ndswl Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Year of construction: 1981, Condition: ready for operation (used), There are two identical centrifuges available, drum diameter: 1050mm, max. rotational speed: 550/min, max. capacity: 230kg, year of construction machine 1/ 2: 1978/ 1981. Bwobu Rshynphjb Ndjl

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, frequency: 50 Hz, Alfa laval CHPX510SGD-35CGRX separator complete system including engine Valve rig Control cabinet Bwobu Rb Njucct Ijdel Starter cabinet Solids pump Cyclone Sludge tank Foundation plate Vibration damping feet Tools for bowl Compression tool Inert gas system Documentation Previosly used by alfa laval for training

Condition: reconditioned (used), input voltage: 400 V, type of input current: three-phase, type of motor: three-phase motor, Alfa laval HMRPX614 separator reconditioned complete with engine Cyclone Foundation plate Vibration damping feet Tools for bowl Compression tool for bowl Bebueucq Rzj Rb Ndjwl

Condition: reconditioned (used), Functionality: fully functional, rotor speed: 4,600 rpm, type of motor: three-phase motor, type of input current: three-phase, Alfa laval TX 212 nozzle separator fully reconditioned, complete. Frame upper part in brass. Motor 75kw Tools for bowl Bwjbu Rb Neuccy Ujdjl Extra bowl availible upon request (complete)

Condition: good (used), input voltage: 400 V, type of input current: three-phase, type of motor: three-phase motor, MRPX514 complete with control cxabinette, motor, cyclone, tools for bowl and vibration damping feet Bwobu Rb Nsucq Srsdsl

Condition: good (used), input voltage: 400 V, type of input current: three-phase, MRPX418, reinforced bottom slide. Complete with motor, tools for bowl, cyclone, foundation plate and vibration damping feet Bwebu Rjucq N Djb Ndel

Condition: excellent (used), operating hours: 280 h, Functionality: fully functional, type of input current: three-phase, rotational speed (max.): 6,900 rpm, rotor speed: 6,000 rpm, input voltage: 400 V, Equipment: documentation/manual, AX215 in excellent condition Beboucctbou Rb Ndjwl with only 280 working hours! Complete system with piping, valves, pump, cabinette and sludge tank.

Condition: good (used), Functionality: fully functional, One Alfa Laval SSRPX614 vegetable oil separator, complete with motor, cyclone, tools for bowl, foundation plate, vibration damping feet. Bwsbu Rsun Nfiob Ndjl Currently under recondition, will be fully reconditioned and tested.