Used filter systems for sale (73)

Condition: used, Used industrial dust extraction system, complete with a Dynair 7.5 kW fan, electrical control panel, and filtration unit. No disassembly required. Available immediately. Complete system as shown in the picture. Gbsdpfjz Rpltsx Ahdju Located in Rotterdam, the Netherlands. Delivery: EXW Rotterdam. Worldwide inquiries are welcome. Additional information and photographs are available upon request.

Condition: excellent (used), functionality: fully functional, filter area: 238 m², input voltage: 380 V, volume flow: 25,000 m³/h, total width: 2,100 mm, total length: 6,600 mm, total height: 6,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 78 dB, Equipment: documentation/manual, BAG FILTER dimensions: approximately 6600 x 2100 x H 6500 mm no. 108 fabric filters, length 2500 mm no. 01 dust settling zone no. 05 explosion-proof ventilation panels filter cleaning by mechanical vibration hopper with screw conveyor and rotary valve for dust discharge Optional: - Control panel Godpfx Aoz N St Dehdebu - Electrically driven fan - Piping

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, FIRE PREVENTION SYSTEM FOR DUST COLLECTION AND AIR FILTRATION SYSTEMS ACCESSORIES FOR MAINTENANCE OF DUST COLLECTOR FILTERS Components for spark detection and extinguishing systems in dust collection ductwork. Configurable systems for spark detection and water-based extinguishing in ductwork. Detection, extinguishing, and containment systems for dust collection and air filtration systems. DESIGN, SALES, INSTALLATION, AND PERIODIC MAINTENANCE Gbsdpfx Ahsz N Suusdju FILTER FABRICS for baghouse dust collectors Tubular filter fabrics with various weights and treatments for dust.

Condition: used, Year of construction: 2015, A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE , shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible. Gjdpfx Ahjz Hn Svodobu

Condition: excellent (used), For sale: BOFA ES500i+ industrial fume and dust extraction unit, designed for use with laser equipment. The unit has a metal housing with wheels, a control panel with a display, and access to the filter section. Data from the nameplate: - Model: ES500i+ - Part number: 10069037 - Power supply: 230 V, 50 Hz, 10 A Gbsdsz Ezraopfx Ahdeu - Year of manufacture: 2017 The photo shows the display indicating 4999 operating hours. The visual condition and components of the unit are shown in the photos.

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Gedpfxjidx Uis Ahdobu Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out on-site, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site lifting stations. The chips and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Gedpezwccmofx Ahdebu Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, incl. 70 mm stiffening Width: approx. 1,890 mm, incl. 140 mm stiffening Height: approx. 1,105 mm, incl. 100 mm bottom profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Volume max.: approx. 0.55 m3 51026ä

Condition: used, Year of construction: 2019, functionality: limited functionality, total width: 1,500 mm, total length: 2,000 mm, total height: 3,000 mm, overall weight: 1,200 kg, Equipment: documentation/manual, The system is used to clean the air in industrial halls and, depending on the filter configuration used, can be employed for the collection or filtration of dust, smoke, or welding fumes. IVAT filter towers are generally designed for industrial air purification in halls. The filter tower has a motor output of 18.5 kW and was manufactured in 2019. The machine is in used condition with signs of wear and tear consistent with its age and use. The drawer at the bottom has a slight leak. Gbodpfx Ahjzq D Idodeu An inspection and functional test on-site can be arranged. The item is sold as shown in the pictures. Key data: Manufacturer: IVAT GmbH Machine type: Filter tower / extraction unit Model: Profi-Tower 28000 K Motor output: 18.5 kW Year of manufacture: 2019 Condition: used Application area: industrial air purification in halls / extraction CE marking: available

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Suction capacity: 10,000 m³/hour. Gbjdpfoz Akpfsx Ahdou

Condition: excellent (used), For sale: a BOFA ES400i industrial extraction unit, manufactured by BOFA International for Markem-Imaje. This unit is designed to extract and filter contaminants generated during the operation of marking devices, including lasers. The metal housing is equipped with wheels, a control panel, and connectors for connecting the extraction system. The interior and visual condition of the unit are shown in the photos. Gedpfx Asz Ezr Tohdebu Data from the nameplate: - Model: ES400i - Part number: 0695914 - Power supply: 230 V, 50/60 Hz, 6.20 A - Date of manufacture: 03/2009 - Serial number: 03/09/ES400i-1111

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Gbsdjzfqgiepfx Ahdeu Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: used, Year of construction: 2015, Manufacturer: Donaldson Model : TDP450 Year : 2015 Type : Dust collector Gsdpfx Aozz Thnehdobu Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Power : 3 kW Required pressure: 6 bar 2 new Ultra Web filters Cleaning filters using compressed air Dimensions: 100 x 130 x 290 cm Weight : 350 kg

Condition: good (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 096106384, input voltage: 230 V, overall weight: 451 kg, input frequency: 50 Hz, Edwards Helios-E Gas Abatement system in Excellent Condition! Description: system for Effective exhaust management of CVD processes for semiconductor processing. Manufacturer: Edwards Model: Helios-E Sr.no. 096106384 Manufactured 2009 Power: 1Ph, 230V, 50 Hz. Gjdpfxov Diqne Ahdebu Weight: 451 kg With documentation

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Gbjdpfx Asxri T Uehdju Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Gbjdezxr R Aspfx Ahdou

Condition: like new (used), Year of construction: 2007, AME FBH 1575 Walking device for the production of concrete elements, SP7 control, year of manufacture 2007; semi-automatic stacker with mobile pallet magazine FGH 1575, product sprinkler, concrete transport container, sweeper for the production area, 4 production moulds, portable platform, additional vibrating platform, cable drums, spare parts package. The listed devices have never been used and are in brand new condition! The stated price is for one set of devices. Two sets are available. Gbjdpfxjylihme Ahdou

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 150 m², input voltage: 380 V, volume flow: 20,000 m³/h, total width: 2,450 mm, total length: 2,400 mm, total height: 8,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 78 dB, Equipment: documentation/manual, BAG FILTER – SELF-CLEANING Gbodpfx Ahjz Nm Snedsu Airflow rate: max 20,000 m³/h Dimensions: 2400 x 2450 x h 8500 mm Filter area: 150 m² Filter fabric: antistatic, 500 g/m² Cleaning system: Pulse-jet with control unit/sequencer; manual/automatic operation No. 02 explosion-proof ventilation panels – ATEX, in a horizontal structure Conical hopper for free-fall of filtered dust and discharge via motorized rotary valve, 0.75 kW Dust discharge system designed for collection in big-bag sacks. Electrical panel with star/delta starter, 22 kW Fan, 22 kW

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 200 m², input voltage: 380 V, volume flow: 20,000 m³/h, total width: 2,400 mm, total length: 3,500 mm, total height: 8,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 75 dB, Equipment: documentation/manual, Dust collector – Self-cleaning filter with filter sleeves – NEW – Airflow rate: 20,000 m³/h Dimensions: approximately 3600 x 2400 x 8500 mm (height) Filter area: 200 m² Filter fabric cleaning system: reverse-flow air jet Discharge of filtered dust: motorized screw conveyor, 1.1 kW – rotary valve, 0.75 kW Explosion-proof ventilation panels: 2 Electrical control panel Electrically driven fan: 30 kW Gedpfxoz Nhgys Ahdobu

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FNE3J07CM027248, compressed air connection: 6 bar, overall weight: 128 kg, Wamflo Gjdpszgubtefx Ahdsbu Filter elements: elliptical sleeves Filter diameter: 800mm Cleaning system: compressed air Filter surface area: 7m2 Filter length: 920mm Filter material: stainless steel

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Gbsdpfx Aozvghkehdju

Condition: like new (used), Depureco DF FIX SP explosion-proof (EX) industrial extractor with few operating hours, brand new Manufacturer: Depureco Type: DF FIX SP 75 (ATEX Z22 explosion-proof) Power: 7.5 kW (three-phase, equipped with centrifugal fan) Gjdpfxszy N S Hj Ahdsbu Power supply: 400 V / 50–60 Hz Maximum air flow: 3900 m³/h Maximum vacuum: 575 mmH₂O Static suction power: 539 mmH₂O Collection capacity: 175 liter, detachable, wheeled metal container Filter surface: Standard 45,000 cm² "M" class polyester filter Cleaning system (SP): Automatic compressed air (jet-pulse) counter-current filter cleaning - cleans continuously during operation the cartridge. (PSC) Dimensions: 1670x850x1980mm Weight: 220kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: Vector Ultra, Used ATMI Ecosys Vector Ultra Gas Scrubber – Semiconductor gas scrubber – Gas Abatement System Gjdpfx Ahexhdg Usdsbu

Condition: like new (used), DCE Insert Filter Type: DLM V9/15 k5 Excl. fan (fan specifications are known) Gbsdpfx Ahsxc Enpedsu Incl. new filter fabrics Filter frame length: 1500 mm See our other listings VMA Wekerom

Condition: used, Year of construction: 2009, Extraction unit filter cabinet Brand/Type: FAPP AE 12/3J Equipped with 1 used filter cartridge See our other advertisements Gsdpsxc Erhjfx Ahdebu VMA Wekerom

Condition: used, Year of construction: 1994, Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement. Gbjdszu S Adspfx Ahdsu