Used mills for sale (56)

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Dimensions: 700mm X 1450mm Hnsdoyz R Unjpfx Aczek

Condition: used, Type: Three-roll mill Hedpfx Aoy Abb Isczenk Roll width: 150 mm Roll diameter: 75 mm Number of rolls: 3 Safety sensor Control panel    

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Hodpfx Acjy Atyiozenk Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Hnedpfx Aoy Atx Esczok Rotor diameter 450 mm Rotor width 600 mm 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Hodoy Atxrjpfx Aczsnk Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Rotor diameter: 500 mm Hsdpfx Acsy Atxlozjnk Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Hsdpoy Atw Iefx Aczenk Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Hedpfxoyyxnyo Aczenk Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness Hnsdpfoyyxnmex Aczjk

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm Hnedpfjyyxm Nsx Aczok

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Hodpfx Acsyyxlrjzenk Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Hedsyyxi Dopfx Aczonk Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Hedpfoyyxikjx Aczonk Drive: 75 kW

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Hnsdpfx Ajyyxhyjczsk Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Multiple knife mill / granulator with rotor with 16 knives Hodpfoyyxfxox Aczjnk 6 stator knives Drive 90 kW With equipment

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Hedpfxjyyy Nxe Aczsnk

Year of construction: 1976, condition: ready for operation (used), Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible. Hedpfeyarrksx Aczsnk

Year of construction: 2007, condition: used, Manufacturer: Pallmann Model: PPSR 10-300 Year: 2007 Type: Contra Selector mill / Fine Impact mill Gentle grinding of dry or wet materials, soft to medium hard. High-throughput cold grinding with fine particle size distribution. Hodpfjx R D Iyjx Aczsnk Weight : 7000 kg Rotor drive speed: 1590 rpm (110 kW, 380 V, 1500 rpm) Sieve basket speed: 660 rpm (55 kW, 380 volts, 1500 rpm) Impact rotor diameter: Ø 100 cm Screen width: 30 cm Number of hammers: 60 Pneumatic transfer pickup at machine exit Material : 316L stainless steel Technical documentation available

Condition: used, Manufacturer: Mineralwerke Type: PZ 250 M4 Voltage: 380 V Output: 55 kW Weight: 1950 kg Hnsdpoh D Hmvefx Aczjk

Condition: excellent (used), Bead Mill VMA Getzmann Dispermat SL50-C Power: 3 kW Speed range: 0-6000 rpm Milling chamber volume: 0.5 l Hnodox Rzxispfx Aczsk Rod temperature sensor Very good condition, directly from production!!!

Condition: excellent (used), Bead mill Molteni MS.15 Hedpfsiu H Ucsx Aczjnk Ex-protected version grinding container 15 l additional grinding tank double jacket power 17,5 kW Very good ready to use condition, directly from production!!!

Condition: excellent (used), Bead mill Drais PM 1 RL-V Ex-protected version grinding tank 1,3 l power agitator 2,5 kW with feed pump Hedpsk D Ac Ejfx Aczenk Revision in 2005 Very good condition, directly from production!!!

Condition: excellent (used), Ball mill Vollrath EFC 200 Wet and dry grinding Iron-free grinding with steatite balls Lining hard porcelain Volume 200 l Drive power 1,4 kW speed 42 1/min 3 ball mills each mounted on steel construction Hnedpfx Aek D Dwteczjk Very good ready to use condition, directly from production!!!

Condition: excellent (used), Bead mill COMEC M 8 Hsdpfx Aceh Rakhezenk Stainless steel Double jacket Container capacity 8 l Very good working condition, directly from production!!!

Condition: excellent (used), Bead mill Drais PM 25 RL-V Ex-protected version grinding tank 26 l Hnjdjk D Agtopfx Aczok power agitator 24 kW with feed pump Very good condition, directly from production!!!