Used machining centers (vertical) X-axis travel 1000-1199mm for sale (335)

Condition: used, Year of construction: 2018, operating hours: 13,276 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 300 kg, rotary table diameter: 410 mm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 22 bar, Equipment: chip conveyor, rotational speed infinitely variable, Offered for sale due to upgrade to a larger MT EVO, located near Frankfurt. The machine offers top-tier accuracy. The worst part about this listing are the photos, which do not accurately reflect the machine's real condition. The machine is in excellent working order and produces highly precise components! Internal coolant supply 22 bar, including centrifuge. Heidenhain TS460 for SK40, workpiece probing system with infrared transmission. Heidenhain TT460, Tedpfxoxyhg No Ag Isf tool probing system with infrared transmission for tool measurement. Technical data: - 12,000 rpm - Torque: 120 Nm (S3 25% duty cycle) - Drive power: 23 kW (S3 25% duty cycle) - Separate spindle cooling for consistent temperature - Tool holder DIN SK40 with air blast function Rotary table: - Ø 410 mm General features: - Travel range X/Y/Z: 710/700/610 mm - 48-position tool changer with double-arm gripper - Chip conveyor - Coolant and compressed air gun - Coolant system - Electronic handwheel - Work area lighting - Cast iron machine bed, 9,000 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Workpiece Todpfsxvfi Tex Ag Isf Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2011, Technical details: travel -x axis: 1000 mm travel -y axis: 500 mm travel -z axis: 610 mm Todpfx Ajxp Nrleg Ief turning speed range: 12000 1/min control: HEIDENHAIN iTNC 530 tool change unit: 40 Pos. Tool bore: SK 40 table-size: 1.200 x 500 mm max. table load: 850 kg total connected load: 37 kW weight: 6,8 to. space requirements approx. LxWxH: 2,65 x 2,1 x 2,9 m vertical machining center, internal coolant supply 20bar, airblast through spindle, direct measuring system, prepared for 3D-touchprobe (M&H PS 25.00), chioconveyor NC-dividing device LEHMANN EA 520 L MA (center height 180mm) approx. 26.000h "machine on", approx. 7.500h "spindle on" *

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,317 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco Max 5, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,067 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Spindle speed (max.): 12,000 rpm Tjdjxrdxljpfx Ag Isf Spindle power: 18 kW Spindle torque: 239 Nm MACHINE DETAILS Control model: Hurco Max 5 Weight: 7,100 kg Operating Hours Spindle hours: 3,317 h Operating hours: 8,634 h EQUIPMENT 40-position automatic tool changer (ATC) Internal coolant supply 20 bar Renishaw probe OMP60 Renishaw laser Software package DXF Software package for tool measurement Software package for workpiece measurement Software package NC Conversational Merge Software package tool change optimization

Condition: good (used), Year of construction: 2007, IKZ, direct path measuring system, 3D probe preparation (without probe), chip conveyor, approx. 18,500 power-on hours, approx. 500 spindle hours Tjdpfx Aew U N Urog Ief Technical details Travel - x 1000 mm Travel - y 500 mm Travel - z 610 mm Speed range 8000 rpm Weight 5.5 t Control HEIDENHAIN iTNC 530 Tool changer 24 positions Tool holder SK 40 Table size 1,200 x 500 mm Max. table load 850 kg Total connected load 37 kW Space requirement approx. LxWxH 2.65 x 2.1 x 2.9

Condition: as good as new (ex-display), Year of construction: 2024, Controls: Siemens 828D incl. Shopmill travels X/Y/Z: 1000/620/600 mm speed range max.: 10000 rpm drive power AC (40 %): 13,5 kW (Siemens) tool holder: SK 40 rapid traverse X/Y/Z: 36/36/36 m/min Equipment a. o.: Robust roller guides in all axes Spindle cooling system (oil cooling) Fast double arm gripper with preselection and vertical magazine with 30 tool places Tjdpfx Agsd Aahwo Isf Hinged belt chip conveyor Coolant through the spindle with 20 bar high pressure pump Blow air through the spindle Coolant gun Movable electronic handwheel

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Tjdpowu Tpnjfx Ag Ief

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 9000 kg Control Unit Brand OKUMA Model OSP 700M Main Drive Number of axis 4 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Z-Axis Movement 450 mm This 4-axis Okuma MX 55 VB was manufactured in 1998. It features a CNC OSP 700M, a table size of 1300 x 560 mm, and movements of X 1050 mm, Y 560 mm, Z 450 mm. It includes ISO 50 tooling and a 4th axis. Consider the opportunity to buy this Okuma MX 55 VB vertical machining centre. Contact us for more information. Tsdpsxv Eziofx Ag Ief Application Types Milling

Condition: used, Year of construction: 2016, Technical details: x-travel: 1000 mm y-travel: 610 mm z-travel: 600 mm table-size: 1150 x 600 mm table load capacity: 1000 kg rapid traverse X- and Y-axis: 24 m/min rapid traverse Z-axis: 24 m/min spindle taper:: SK 40 spindle turning speed range: 10.000 1/min spindle drive: 15/22,5 kW tool change unit: 30 Pos. CNC-control: SIEMENS 828D operate shopmill distance spindle nose and table: 110 / 710 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 3,2 x 2,2 x 2,7 m Tsdpfew Hg Syjx Ag Ief vertical machining center, - internal coolant supply 30 bar - chipconveyor - cartridge filter - flat tracks - el. handwheel - prepared for 4th axis - 3D touchprobe RENISHAW OMP 60 - indirect measuring system - accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray) approx. 6.000h "spindle on" *

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function Tsdpfxsxwufao Ag Ief - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Todsxr A Edepfx Ag Ief Main spindle motor: 11 kW Video of machine in operation available

Condition: excellent (used), Year of construction: 2017, Excellent Condition Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Distance from spindle nose to table top - 0-485mm A axis travel (rotate along with X axis) +30 degree C Axis travel (rotate along with Z axis) 360 degree Spindle Spindle speed - Direct drive 12,000rpm Spindle taper - BT40 Spindle motor (cont./30min) - 11/15kW Spindle max. torque (cont./30min) - 70/95Nm Feedrate Linear guideway on X/Y/Z axis - Ball way 35/45/45 mm Rapid Traverse rate on X/Y/Z axis - 36,000 / 24,000 / 10,000mm/min Rapid traverse rate on A/C axis - 20/27rpm Cutting feedrate - 10,000mm/min Tool Magazine Tool Magazine - 24 pocket Max tool diameter / adjacent pocket empty - 80mm Max tool length - 300mm Max tool weight - 8kg Todpfexmhbaox Ag Ijf Space requirement & weight Machine length x width 2950 x 2350mm Machine height 3140mm Machine weight 7200kg CNC Control - Fanuc 0MP Miscellaneous Pneumatic requirement - 6kg/cm power requirement - 40KVA coolant tank capacity - 400ltr

Condition: used, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table width: 500 mm, table length: 1,200 mm, rotational speed (min.): 70 rpm, rotational speed (max.): 10,000 rpm, FADAL VMC 4020 MACHINING CENTER MOD. 906-1 CNC 88 HS TABLE DIMENSIONS 1200 x 500 BALL SCREW DIMENSION 40 mm X AXIS: 1000 Y AXIS : 500 Tedpoxxa E Ujfx Ag Iof Z AXIS : 500 spindle speed 70-10,000 rpm NUMBER OF TOOLS : 21. USED MACHINE INTERNAL CODE : CS 274

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Controller Brand FANUC Model 0iMF Main Drive Spindle speed range 8000 rpm Spindle motor power 11 kW Tool taper BT40 Number of axis 3 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 24 m/min Table Table load 700 kg Tsdpfx Agexuw Hno Ief This 3-axis Hartford LG-1000 vertical machining center was manufactured in 2017. It features a 1150x510mm table with a load capacity of 700kg, an ATC with 24 positions, and a spindle speed of 8,000 rpm. The machine includes a FANUC 0iMF controller and linear guide ways. If you are looking to get high-quality milling capabilities, consider the Hartford LG-1000 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, Tedpoxp Rywsfx Ag Ief the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Todpfxjxxlmwj Ag Ijf Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: good (used), Year of construction: 2001, TOS TV-1000 A CONTUR MV 100 VA CNC machining centre Manufacturer: Trens Tsdpfx Asxx Ndmeg Ief Model: MC 100 VA Year of manufacture: 2001 Control: Heidenhain TNC 410 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg

Condition: good (used), Year of construction: 2015, operating hours: 50,871 h, functionality: fully functional, The machine is in good technical condition, fully functional, and still in operation. A test run is possible. Spindle replaced in 2021. Technical specifications: X axis 1,020 mm, Y axis 610 mm, Z axis 720 mm. Spindle speed: 12,000 rpm. Clamping area of the table: 1,200 × 600 mm. Max. table load approx. 1,000 kg. Spindle speed range: 40 – 10,000 rpm. Spindle power approx. 15 / 22 kW (short-term operation). Spindle taper ISO 40 / DIN 69871. Tool magazine: 30 positions. Rapid traverse (X/Y/Z): approx. 30 m/min. Control: HEIDENHAIN iTNC 530, electric motor with planetary gearbox. Machine weight approx. 8,000–9,000 kg. Machine dimensions (LxWxH): approx. 3,700 × 2,800 × 2,800 mm. Todexxmtfepfx Ag Ief

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 16000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 1100 mm Y-Axis Movement 1000 mm Z-Axis Movement 550 mm Tedpfx Aexuw Huog Isf This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 4800 kg Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Tedpfx Agsxuav Sj Ijf This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1016 mm X-Axis Rapid Traverse 30.5 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 30.5 m/min Z-Axis Movement 635 mm Todpfx Agexuldho Isf Z-Axis Rapid Traverse 30.5 m/min Table Table load 794 kg This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 3 Tjdpfsxuldnjx Ag Isf Movement X-Axis Movement 1016 mm X-Axis Rapid Traverse 30.5 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 30.5 m/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30.5 m/min Table Table load 794 kg This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2400 mm Measurements depth 2800 mm Measurements height 2800 mm Machine weight 5000 kg Main Drive Tsdpfjxu Rxdsx Ag Iof Spindle speed range up to 10000 or 12000 Tool taper BT40 or CAT40 Movement X-Axis Movement 1067 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 1500 kg Tools Number of index 24 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VMX42 vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 20 - 14000 Tool taper ISO40/SK40 DIN69871 Number of axis 3 Movement X-Axis Movement 1150 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 1460 mm Outer width 750 mm Tsdoxpklyopfx Ag Iof Additional Equipment Infrared touch probe Make: Renishaw PP 60 optical (OMP 60) Tool length and diameter measurement Automatic cleaning of tool holders using an air jet Tool cone calibration equipment Safety package for power supply failure Overvoltage limiter Undervoltage monitoring with rapid braking activation Electronic handwheel Chip extractor (chip scraper) This 3-axis DMG MORI DMC 1150 V was manufactured in 2016. A robust vertical machining center featuring a 1150 mm X-axis, 700 mm Y-axis, and 550 mm Z-axis. It boasts a rapid traverse of 42 m/min and a speed range up to 14,000 rpm. Equipped with a Heidenhain TNC 640 control, 30-position SK40 tool magazine, and a chip extractor system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1150 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,917 h, Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Table load 800 kg Tools Type of tool holder BT40 Tjdoxuaz Iopfx Ag Ief This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. Application Types Milling