Used Mc Cormick Mtx 165 for sale (2,973)

Year of construction: 1989, condition: used, Folder Gluer Dsdpfez Atf Nsx Afvswd bottom lock 4 gluing points it works to EB flute and solid board from 350 gr to 800 gr.

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Djdpfozx R Dnox Afvswd Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: used, Year of construction: 2011, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 360 mm, controller model: FANUC 31i-A5, spindle speed (max.): 10,500 rpm, TECHNICAL DETAILS X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Distance from spindle nose to table: 200–560 mm Rapid traverse rate X/Y/Z: 60 m/min Spindle speed range: 36–10,500 rpm Spindle power: 30–35 kW Tool holder: HSK-A63 Number of pallets: 2 Pallet load: max. 450 kg Magazine capacity: 2 × 21 Tool diameter: max. 88 mm Tool diameter with free neighboring positions: max. 125 mm Tool length: max. 250 mm MACHINE DETAILS Dsdpfxo Agfrwe Afvjwd CNC control: FANUC 31i-A5 Dimensions & Weight Machine weight: 5,300 kg Overall dimensions: 3,200 × 3,250 × 3,245 mm EQUIPMENT Chip conveyor Paper filter High-pressure coolant pump Tool setting 4-axis table, 1 piece

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours. Dwjdpfszti Tksx Afvsd

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,204 h, functionality: fully functional, machine/vehicle number: MR610745176, punching force: 30 t, type of input current: three-phase, punching diameter: 88 mm, input frequency: 50 Hz, compressed air connection: 6 bar, input voltage: 400 V, Equipment: safety light barrier, Euromac MTX FLEX 12 P 1250/30 X2250 (Year of Construction 2016) – Only 2,204 punching hours! Includes a large tool package & special tools. For sale is a very well-maintained, fully functional CNC punching machine, the Euromac MTX FLEX 12, manufactured in 2016. The machine is in excellent condition and has a very low net punching time of only approximately 2,204 hours (total operating time approximately 9,055 hours, see display photo). A particular highlight is the extensive tool and accessory package, which, in addition to standard and multi-tool tools, also enables valuable special applications such as engraving, countersinking, and deburring from below. 📌 Technical data & machine highlights: Manufacturer: Euromac (Italy) Model: MTX FLEX 12 P 1250/30 X2250 Year of Construction: 2016 Punching force: 300 kN (30 tons) Working area: 1250 x 2250 mm (can be extended as required) Net punching time: only ~2,204 hours (total number of strokes: approx. 6.19 million) Table: Gentle brush table for scratch-resistant sheet metal processing Control: Top Punch Touch (TPT) on a robust Panasonic Toughbook control unit 🛠️ Special equipment & special features: Integrated engraver: For direct labeling/marking of components during the punching process. Countersinking tool from above: Specially equipped for 4.0 mm SPAX countersinking. Deburring from below: Ideal for precise marking/deburring from the underside. Multi-tool capability: Full support for multi-tool cassettes (e.g., XMTE6 / XMTE10) for quick tool changes and high flexibility. 📦 Scope of delivery & accessories: Large punching tool assortment: Extensive package of punches, dies, blanking punches, and cassettes (including high-quality tools from Wilson Tool & Mate). Double/replacement equipment: Including installed multi-tool + identical replacement multi-tool (see picture V40) for uninterrupted workflows. Software: Lantek programming software included. Accessories: Tool holders, clamping jaws, manuals/documentation. 📋 Condition, inspection & logistics: Condition: The machine is currently still assembled, fully operational, and connected to the power supply. Test & inspection: A demonstration and trial punching on-site in 78224 Singen can be arranged. Loading: Loading on-site can be organized/supported. Transport: Transport and collection are the responsibility of the buyer. Dwjdpfxs Aaz Tys Afvsd 💶 Price & invoicing: Price: 90,000 € negotiable (net plus 19% VAT) You will receive a proper invoice with VAT stated. Subject to prior sale and errors.

Condition: repair required (used), Year of construction: 1998, operating hours: 6,000 h, functionality: limited functionality, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 221 mm, total length: 2,500 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,750 kg, Equipment: documentation/manual, We are offering this Spinner TC46-MC CNC lathe, built in 1998, which requires repair. The turret needs to be overhauled. Dwedjz Ekq Espfx Afvsd The machine is powered on. Otherwise, it has no other defects. Serial number: 040235 Type: TC46-MC Voltage: 3 × 400 V Current: 50 A Frequency: 50/60 Hz We will gladly load the machine onto a truck for the customer using a forklift. All relevant documents for the machine are available, including the purchase contract, training materials, repair records, manuals, and maintenance information. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, functionality: fully functional, Injection molding machine KraussMaffei KM 800-5700 MC – Year of manufacture: 1999 Technical data: Manufacturer: KraussMaffei Model: KM 800-5700 MC Year of manufacture: 1999 Clamping force: 8,000 kN (800 t) Screw diameter: 105 mm Operating hours: approx. 82,540 h 4 core pulls 1 air valve AS Dwodpfo Aif E Iox Afved Tool mounting height: min. 600 mm, max. 1,100 mm Closing stroke: 1,400 mm Platen size: 1,300 × 1,300 mm Tie bar spacing horizontal: 1,120 mm Tie bar spacing vertical: 1,000 mm Centering ring: 250 mm 8 water circuits each Equipment: Conveyor belt Enclosure Handling system Condition: The machine is functional and can be tested. In 2025, the machine was inspected by KraussMaffei, and the pump connections were resealed. Location: Thuringia, Germany _____ Subject to prior sale and errors in technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Dwsdpsw Tir Iefx Afved

Condition: good (used), Year of construction: 2017, functionality: fully functional, Brüninghaus / Fromm / Siat WS 165 NOW pallet wrapper in fully functional condition, manufactured in 2017: Turntable diameter: 165 cm Overall height: 241 cm Pallet height: 210 cm Pallet weight: 2,000 kg The access ramp can be attached at the front, left, or right. Dsdpfxszpv Igj Afvewd The WS 165 NOW can be programmed with 10 different programs for individual products and pallets. The machine has 5 different operating modes: - Automatic mode, upward only, as well as up and down - Automatic mode, upward only, as well as up and down with a pause for a pallet top sheet - Manual mode The motor cover (see picture) is only loosely placed and is not attached. Shipping via a freight forwarder is possible after consultation. #8553

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max. turning diameter. 400 mm Turning length. 650 mm Circumferential diameter. 600 mm X-axis travel. 275 mm Z-axis travel. 700 mm Bar capacity. 85 mm Main spindle. 3,400 rpm for 85 mm bore Spindle nose. A8 / DIN A8 Chuck Driven tools. MC = Milling/driven tools Control system. Siemens 16-station BMT45 turret, axial - all stations driven Dwodpfxez Hyy Es Afvsd Chip conveyor in the tailstock High-pressure pump, 15 bar Siemens Sinumerik One Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 88229, total width: 1,450 mm, total length: 2,100 mm, overall weight: 3,800 kg, table width: 1,000 mm, table height: 850 mm, table length: 2,100 mm, Equipment: type plate available, Coordinate measuring machine: Zeiss MC 850, 08/12/06, UHING Year of manufacture: 08/1990 Serial number: 88229 Control system: C99 Dongle available: Yes Software: Calypso 7.6.4 Measuring head: VAST XT – Good condition – PC included – New software + license – Everything packed for transport with original Zeiss transport securing devices (value of transport securing devices approx. €5500) X-axis as a longitudinally movable portal, 850 mm Y-axis cross slide in the portal, 1,200 mm Z-axis as a measuring head quill (vertical), approx. 600 mm Through-passage between the portal, approx. 1,000/1080 mm Through-passage in height, approx. 750 mm Overall table size, approx. 1,000 x 2,100 mm Table height above the floor, approx. 850 mm Machine height, approx. 3,050 mm Weight, approx. 3,800 kg The machine was in use until recently. Free loading. Dwjdpsz T T T Tefx Afvsd

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Dwjdjztpmdepfx Afvsd Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Dwsdpfjz Ep Dksx Afvod

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available Djdpfx As Ahqyusfvswd

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Dsdpfx Asxzq Ncofvewd Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm Dwsdpfx Afjztc Dieved • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Dedpex Rywksfx Afvewd

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43414, Heller MC16 No. 31-43514, Year of Manufacture: 1999 Spindle Speed (rpm): 45-16000 SK40 Travel paths (mm): X 630 / Y 630 / Z 630 Rapid traverse speed (mm/min): 1-40000 Number of tools: 80 Djdpfx Aowffd Sofvswd Tool diameter (mm): 70/150 (with free adjacent slots) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain measuring probe: Yes Power (kVA): 60 Machine No. 64 ATL iTM400HP No. 14916, Year: 2009 Power (kVA): 30 Deburring chamber: Standard 400 / 400 mm Max. gas filling pressure: 20 bar Siemens Multipanel with Windows CE operating system

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). Dwjdjzcaufspfx Afvsd - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: excellent (used), mileage: 654,094 km, power: 324 kW (440.52 HP), first registration: 05/2012, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, emission class: euro5, Equipment: crane, = Additional options and accessories = - PTO = Remarks = WMA06SZZ3BP026567 = More information = Year of construction: 2012 Empty weight: 12.707 kg Carrying capacity: 6.293 kg GVW: 19.000 kg Crane: ATLAS ATLAS 165 Make of bodywork: ATLAS 165.2E Technical condition: very good Visual appearance: very good Registration number: BL882GP = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Dwodpfx Asymrdasfvod When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Dwodpfoz I Nawex Afved Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Djdpfx Ajzwlw Tefvswd Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC turning machine EMCOTURN 365 MC with counter spindle Year of manufacture: 1998 Control system: Sinumerik 840D Accessories: Dedpfxjz Tc Utj Afvewd - Parts collector - Chip conveyor Further details to follow Includes a wide range of accessories.

Condition: used, Year of construction: 2004, turning diameter 820 mm turning length 3000 mm control Siemens 840 D workpiece weight 2,5 t drive of main spindle 77 kW spindle nose A15 Dwsdpfsz S Nx Aox Afvod spindle bore 160 mm Workpiece head (C-axis) 0,005 grad max. torque on the working spindle 2500 Nm main spindle speeds: 0-2.430 U/min feeds z-axis 0,1-18.000 mm/min rapid traverse Z-axis 18 m/min feeds x-axis 0,1-30.000 mm/min rapid traverse X-axis 30 m/min steady 50-350 Spannbereich tailstock - quill dia 180 mm tailstock - travel of quill 170 mm y-axis -100/+150 mm rapid traverse y-axis 12.000 mm/min b-axis -105/+95 Grad milling spindle - taper HSK100 milling spindle motor 43 kW milling head speed 1-5.500 U/min max. torque on the milling spindle 336 Nm tool changer 96 Plätze weight of tools max. 15 kg total power requirement 166 KVA weight of the machine ca. 40 t dimensions of the machine ca. 112x4,4x3,85 m

Condition: ready for operation (used), Year of construction: 2007, Make: SPINNER Dwodpfsz I Nlyjx Afvod Type of machine: MC 650 Year of manufacture: 2007 Control system: Siemens 810 D Machine's weight: 9500 kg Tool holder: SK 40 x-travel: 650 mm y-travel: 450 mm z-travel: 460 mm Speed range: 8000 1/min Overall dimensions: 3,6 × 2,2 × 3,0 m Table dimensions: 710x450 mm Number of tools in the magazine: 32 Pl.