Used accessories & spare parts for saws (wood) for sale (60)

Condition: used, Two roller conveyors from Paul, suitable for the sub-table crosscut saw AO or similar machines. Roller conveyor length 1: 340 cm Roller conveyor length 2: 190 cm Roller width: 56 cm Hjloyarm Ujhccqqofg

Condition: used, bore 50 mm Holhcexvchmocqqjfg

Condition: used, Speed: 2,700 rpm Motor: 0.24 kW Hfelhccew Uz Rrjqqjg Saw unit including cable and switch.

Condition: new, Width: 100 mm Length: approx. 20 m Holhccew Uig Usqqofg Timing belt sold by the meter, 100 mm wide, suitable for Reinhardt saws.

Condition: used, Bore: 70 mm Width: 6.0 mm Diameter: 250 mm Blades: 20 + 2 Hfslhcowrrdrocqqjg Circular saw blade or grooving saw in very good used or near-new condition.

Condition: used, Bore: 30 mm Width: 3.5/4.8 mm Helhjwcpnpeccqqsfg Cutting circle (ø): 500 mm Material: steel Blades: HW WZ Z144

Condition: used, Hard drive: Empty Hslhccjt N Ag Noqqjfg Technical data: on request Condition: Functional

Condition: used, Bore: 30 mm Helhccqetddxvoqefg Width: 3.8 mm Blade diameter (ø): 500 mm Material: Steel Blade: HW Z72

Condition: used, Bore: 30 mm Width: 3.7 mm Cutting circle (ø): 494 mm Material: Steel Blade: HW WZ Z72 Helhcjtddxrjcqqjfg

Condition: used, Bore: 30 mm Width: 5.2/3.2 mm Hfelhccqsrucqcjqog Cutting circle (ø): 500 mm Hole spacing: approx. 60 / 63 mm Material: steel Blade: HW WZ Z120

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways Heleiimz Ajhccqqofg

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Hfslhccjwaiaajqqeg

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Hfelhouqk Azeccqqeg 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, Helhccsh Anyfeqqefg new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V

Condition: used, Band saw shapers of various models Hjlhjtzga Rjccqqsfg

Condition: used, Bore: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm - as new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar. Hfelhcelf I D Escqqeg

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade HM NE PRO -Type: Ø 350x3.5/3.0 x 32 Z92 = T 11.95 -Art. No.: 0507-1064541X HW -Speed: n max. 5400 rpm -Dimensions box: 390/390/H10 mm -Weight: 2.3 kg Helhcsuaqzbecqqofg

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: Guhdo, saw blade HM NE PRO -Type: 350x3.5/3.0 Z108 -Article No.: 2185.351.31 -Speed: n max. 5400 rpm -Use: non-ferrous profiles/plastics Hfjlhccqeuaqznoqsg -Dimensions box: 385/385/H10 mm -Weight: 2.4 kg

Condition: used, Scoring circular saw blade, Scoring circular saw blades Hfolhcsuqf Irjcqqsg -Manufacturer: KBK, circular saw blade type 160x4.1-5.2x30 Z 28 -Carbide tipped -Box dimensions: 260/230/H60 mm -Weight: 1.2 kg

Condition: good (used), Scoring circular saw blade, scoring circular saw blades Holeb D I Dijhccqqofg -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Condition: used, scoring circular saw blade, scoring circular saw blades, HW scoring saw -Manufacturer: Schäffer, Vorritz circular saw blades HW-Vorritzer 2-part, adjustable -Type: 120 x 2.8-3.6 x22Z=2x12 -Number: 9x scoring saws available -Price: per piece -Dimensions box: 225/220/H10 mm -Weight: 0.3 kg/piece Hfslsuvaaashccqqjg

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 Hslhouaqzzjccqqsfg -Type: Ø 400x4.0x32 Z96 = T 11.95 -Speed: n max. 5000 rpm -Dimensions box: 480/460/H15 mm -Weight: 3.1 kg

Condition: used, Saw blade, wood saw blade, circular saw blade Hjlhcceuaqz Ioqqjfg -Manufacturer: Dress, saw blade HW -Type: Ø 420x4.0/3.2x30 Z96 TFP -Art. No.: 342031 -Speed: n max. 4500 rpm -Number: 4x saw blade available -Price: per piece -Dimensions box: / 430/430/H10 mm / / 430/430/H10 mm -Weight: 3.6 kg/piece

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm Hfslhccqequft Tsqjg -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Condition: excellent (used), saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-37 -Type: Ø 340x5.0/3.5 x 45 Z 108 = T 9.89 -Art. No.: 1010-1081894X HW -Speed: n max. 5400 rpm -Number: 7x saw blade available -Price: per piece Hsljvyd Iaehccqqjfg -Dimensions box: 410/410/H10 mm -Weight: 2.6 kg/piece