Used Telwin Digital Mig 180-220 for sale (17,435)

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table Hnsdpfx Afev Rxkdeajh -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Condition: new, turning length 1000 mm turning diameter 360 mm turning dia. in gap 480 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm Hedexaawaepfx Afajnh spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 540 kg. range L-W-H 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame - Operating tools

Year of construction: 2017, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, For sale: 1 gas-fired chamber oven with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 YEAR OF MANUFACTURE: 2017 for unsupervised operation for three-phase 400Volt three-phase current for temperatures up to max. 700 degrees C. Hnedpfx Aer Hmg Refaeh for natural gas "H", liquid gas Number of burners: 8 Total burner output: 720kW For further technical data see attached PDF. The stove itself was only in operation for 4 years and has made approx. 100 anneals of 23 hours each during this time.

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), New German vehicle: * Euro 6e Temp * 6-speed gearbox * 3 seats * Tank 90 L * Total weight 3,500 kg. * ABS + ESP Hnjdpfx Afetrckzeajh * Driver airbag * Mirror for body width 2200 mm. * Reinforced springs on the rear axle * Radio with Bluetooth and steering wheel controls * Central locking with remote control * Electric window * Electric exterior mirrors/heated Aluminum platform: Floor multiplex board * Aluminum side walls * Lashing eyes in the floor * Internal dimensions approx. LxWxH 480x220x40 cm. Load securing also available from us: * Tensioning and lashing straps * Locking beams * High visibility vests * Transport boxes * Edge protection * Storage bags * Wheel stops * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Tarpaulin, GRP sandwich, aluminum light metal Visit us at: Bodies- Complete vehicles- Trailers- Advice- Financing Subject to errors and prior sale, no liability for printing and input errors

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 16, Used ALMIG ALM 180 air dryer Year 2016 used good condition immediately available Hsdpeffyctefx Afaenh Volume: 2,67 m³/min working pressure 7 bar maximum working pressure 16 bar connection : 1" elektrical voltage : 230 V Elektr. power: 0,60 kW Dimension and weight: height: 601 mm width: 393 mm length: 891 mm weight: 53 kg

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Hodox E Ac Eepfx Afaonh

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Hjdpfx Ajw I Rxrjfasnh Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220 Card SNo. B803704, unused, 100% functional, scope of delivery as per photos Hedpfx Afei D T Dgsasnh

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces the current laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials. New model: PS1812 Hjdpfx Afega U Tdeaonh C M Y K LC LM + White + Varnish or with Double CMYK + WWWW (White) + VVVV(Varnish) Printhead: Epson TX800 2690 dpi max. Including software for printer and image processing Dimensions: approx. 260cm(L) x 160cm(W) Weight: 750kg Print area 1800x1200 and with a print height of 150mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 180 Press’ colour production system. Item for sale: 1 x Xerox Versant 180 Press with the following equipment: Includes FreeFlow Server or Fiery Server Includes Paperdeck A-CF03 Hjdpjxnlbmofx Afaonh Includes Booklet Finisher A-FN13 Includes SquareFold Unit SQF-104 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 267,310 pages Colour: Approx. 253,808 pages Black: Approx. 13,502 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: ready for operation (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: Hsdpou Ra Smsfx Afaonh 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. Booklet Finisher A-FN13 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 4,419,328 pages Colour: Approx. 3,524,210 pages Black: Approx. 895,118 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 2020, operating hours: 6,162 h, machine/vehicle number: 958-167, Application version: 6.9.3.9, PLC version 20200618.957, with control PC, flat panel display, handheld scanner, keyboard and mouse (without add-on monitor) Hnodpfx Ajyidl Ejfaeh

Condition: used, Year of construction: 2020, machine/vehicle number: 958-168, Operating hours: approx. 6,000, currently not in operation, print heads have been preserved, application version: 6.9.3.9, PLC version: 20200618.957, includes control PC, flat screen monitor, hand scanner, keyboard, and mouse. Hnodpfjyidl Sox Afaoh

Condition: used, Year of construction: 2021, operating hours: 4,691 h, machine/vehicle number: 964-005, Application version: 7.80.4.1, PLC version 20230531.96, with SUPERMICRO control PC, flat screen, handheld scanner, keyboard and mouse (without tablet PC and monitor assembly) Hnedpeyidlxofx Afaoh

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Hnsdpfox S Nawsx Afaeh Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function – DTR technical documentation – Used chipper, in very good condition Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Year of construction: 2017, condition: good (used), Single Adv. WP5 180-12-220 Water, 180°C 15 KW 0 hours ! year 2023 price: 8.500 € contact: Mr. Rainer Eckerle Hnedpfx Aorupt Njfaeh

Condition: excellent (used), Four side planer KP5-220 made in Taiwan Hsdpfx Afok Ttknjaenh max planing width 230mm max planing height 130mm 2 sliding rollers in the tabletop number of spindles 5 motor of the fifth spindle is mounted on the floor feed on cardan shafts with smooth adjustment fully adjustable spindles machine works quietly without vibration, checked in very good condition, chrome tops

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1800-1220-550 RA1148 Hnodpfok Aa Efex Afaeh year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1300 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, - polishing wheel diameter 350 - 600 mm - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH Hodeg Saqvopfx Afaenh - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm Hjdpfx Ask Aubqefajnh -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package Hjdpfochp Awex Afaonh -Weight: 7.6kg/package

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: 931-531, number of ink cartridges: 5, number of print heads: 8, resolution (max.): 630 dpi, paper width (max.): 500 mm, paper height (max.): 400 mm, total length: 2,900 mm, total width: 2,020 mm, total height: 1,650 mm, type of input current: three-phase, input current: 16 A, input voltage: 400 V, We offer a used, fully operational Kornit Storm 2 DTG printer – Year of manufacture: 2015. The machine can be viewed in person at our facility in Mogliano Veneto, located in the industrial area just a few minutes from Marcon, Treviso, and Venice. *The printer is functional* and equipped with used printheads, which still deliver excellent print quality. Please note that the yellow printhead and only one of the four white printheads require replacement. We are selling it to purchase the next model. The machine was acquired used five years ago and was in full operation until September 28, when two printheads unfortunately stopped functioning correctly. Regular maintenance and cleaning have been carried out, but the machine has not been used in production since October. If you do not already own a compressor with the specifications required for the machine's proper operation, we can include one as part of the sale. You are welcome to visit and inspect the machine in person. Alternatively, we can send a video or conduct a live demonstration of the printer in operation. TECHNICAL SPECIFICATIONS - Print Area: Up to 40 x 50 cm - Compatible Materials: Cotton, polyester, blends, lycra, viscose, silk, leather, denim, linen, wool, and others - Dimensions: 290 x 202 x 165 cm (114 x 80 x 65 in) - Weight: approx. 1705 kg (3759 lbs) - Power requirements: 400/208 VAC, 50/60 Hz, three-phase - Compressed air pressure: 6–8 bar (90–116 psi) - Operating conditions: Temperature 18°C–30°C (64.4°F–86°F), humidity 45%–65% Hnodpfxeygxico Afash MAIN FEATURES - Printheads: Equipped with 8 industrial Spectra Piezo electric printheads, upgradeable to 12 or 16. Capable of supporting various materials and printing on raised elements (e.g., buttons, zippers). - Ink System: Utilizes Kornit’s eco-friendly NeoPigment ink, biodegradable and compatible with a wide range of fabrics. Includes a bulk ink system for efficient, continuous operation. - Production Speed: Prints up to 120 light-colored garments and 65 dark garments per hour. - Resolution: Maximum print resolution of 630 dpi. - Maintenance: Automated maintenance system for long-term reliability, with routine annual checkups, ink replacement, and software updates. ADDITIONAL FEATURES - Eco-friendly process: Meets stringent industrial standards, making it suitable for the safe production of children’s apparel. - Integrated Systems: Built-in humidity and ink recirculation systems enhance reliability and reduce operating costs. If you have any questions or require further information, please feel free to send us a message or call. TECHNICAL NOTES - Operating voltage: 230/400 V AC - Rated current: 16 A - Frequency: 50 Hz - Operating voltage: 200 V AC - Rated current: 16 A - Frequency: 60 Hz - Year of manufacture: 2015

Year of construction: 2006, condition: used, functionality: fully functional, Pinacho Smart 180 lathe in excellent working condition Hjdjygq R Sepfx Afaenh

Condition: excellent (used), CATALOG NUMBER 7213 TECHNICAL DATA - Max cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Max blade diameter: 300 mm - Blade bore diameter: 80 mm - Min element length: 630 mm - Max element width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal hold-down rollers - Pawls - Saw shaft - Smooth hold-down roller - Pawls - Smooth hold-down roller From below: - 2 metal feed rollers, toothed - Pawls - Track - Saw shaft - Track - Infinitely variable feed speed adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic lifting of the upper body - Hydraulic saw shaft adjustment - Pump motor: 0.37 kW - Central lubrication - Extraction port diameter: 1 x 300 mm, 1 x 380 mm - Dimensions (L x W x H): 3200 x 2350 x 2000 mm - Weight: approx. 5500 kg Hnsdox R Dxxspfx Afajh ADVANTAGES – Italian made – Twin-shaft – Used multi-blade saw, in very good condition Net price: 238,900 PLN Net price: 56,880 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Electric Power: 3kW Hnedpfsx U Efbsx Afajh Machine Size: 840x480x1000mm