Used Gea Brewing for sale (207)

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. Bdsdpfxex Antuj Anyei The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. Bedpovhctwofx Anyodi The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM Bdsdpfx Anoyn Dy Nsyji After capital renovation 3 months warranty for parts

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Bjdpfx Aoyfgwljnysdi

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Bsdsyrdlaopfx Anyjdi Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: used, all stainless steel Bjdpfx Ane Aa Rkuoyjdi belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor

Condition: used, all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) mobile with outfeed conveyor Bdsdpfj Aa Riwox Anysi belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg dimensions (l x w x h) : ± 2.800 x1.700 x 2.600 mm 3x400v 50 Hz mobile new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer this GEA COMAS LTH Type 400 automatic cake production line, manufactured in 2018, plus an ABRIGO ultrasonic cutting system, also manufactured in 2018. For sale is a complete GEA Comas line for the production of layered cakes, manufactured in 2018, consisting of: LTH main unit, TRA tray transfer, DRV and DPP cream and syrup depositing/metering stations, DVB unit, cream lifter-tilter, and syrup unit. Included: Abrigo "Flexcut Plus" ultrasonic cutting system for clean portioning, without deforming the cream/glaze. Functional industrial equipment, in very good condition, with minimal wear – the line has only been in operation for a short time, with few hours of use. Price upon request. For details or to arrange a viewing, please contact us via message or phone. If you have any further questions or require more information, please do not hesitate to send us a message or call us. Bjdpjzk Hdhsfx Anyodi

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel Bodpfxsz Ry E Do Anysdi suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, GEA KOPPENS PRF 600 PerFormer | Plate former for burgers, nuggets, and convenience food products Bdsdpozkv Nmefx Anyei Manufacturer: GEA Koppens / Convenience Food Systems (CFS) Model / Type: PRF 600 PerFormer Serial number: 712 Year of manufacture: 2001 Power supply: 400 V | 50 Hz | 3 Ph | 60 A Power: 30 kW Working width of the belt: 600 mm Machine weight: 2850 kg The GEA Koppens PRF 600 PerFormer is a high-performance, industrial plate former designed for use in automated production lines in the meat, fish, convenience food, and vegetarian industries. This machine is an industry standard, dedicated to the precise shaping of products such as burgers, nuggets, meatballs, fish sticks, and cutlets. Thanks to its advanced raw material distribution system, the former guarantees perfect consistency in weight and preserves the fiber structure of the processed material. The core of the machine is a proven plate forming mechanism with a working width of 600 mm, which works in conjunction with a large loading hopper, enabling the achievement of the highest production rates required in industrial processing plants. The operation of the PerFormer former is characterized by minimal raw material loss and a uniform compaction level of the final product, which directly translates into optimized production costs.

Year of construction: 2010, condition: ready for operation (used), A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible. Bdedpfx Anjyx H Huoyji

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Bedpfx Anowayr Tsyjdi Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h

Condition: used, all stainless steel with top hold down belt water circulation Bodsz S Hvxepfx Anyedi net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Bdjdow Ulc Ejpfx Anyji Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm Bdedo Aawyijpfx Anysi infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Bdodpfx Anoy Rtlzoysi

Year of construction: 2010, condition: used, Manufacturer : GEA Niro Soavi S.p.A. Model : NS 2006 H Version : ARIETE Year : 2010 Type: Laboratory piston homogeniser Execution : SANITARY Special features: FDA-compliant + electropolished (Ra < 0.5 µm) + cGMP-compliant   Number of Plungers: 2 Plunger material: CERAMIC Bdedpfx Aneyyq E Djyoi Plunger diameter: 10 mm Plunger stroke: 40 mm No. of Stages : 2 Type of Control : HANDWHEEL Maximum pressure: 1500 bar Maximum viscosity: 500 cP Maximum temperature: 140 °C   Main motor power: 5.5 kW Speed: variable Min. flow rate: 17.5 L/h Max. flow rate: 35 L/h   Heat exchanger with no cross-flow Power cabinet + control panel Complete technical file

Condition: excellent (used), Year of construction: 2022, GEA 600 mm Pro Edge Drive spiral for sale. This was installed new in 2022 and only used for a few months. 18 tiers, 600mm belt. Bdodpfx Asv U T Tbsnyoi

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Bdedozii N Djpfx Anyoi

Condition: excellent (used), functionality: fully functional, overall weight: 1,200 kg, type of input current: three-phase, power: 11 kW (14.96 HP), rotational speed (min.): 6,500 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, CLARIFIER FOR JUICES , WINES , OILS 11KW , UPT TO10 MC/H Bodpfx Anjzv I Aceyodi IMMA MICRO 5,5 KW , 2MC/H =7500 EURO

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. Bodpfsy H Ixusx Anysdi LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLECT LINE FOR OILS units can be sold separate or as a complecte line ?v=nv23KAJFewE

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Grey cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front Bjdpfx Aozk Nk Rsnyodi - 4 speeds with electric speed display - External spindle lock - Milling stop with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top + bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment 220 mm - Table opening 300 mm - Effective length of milling spindle: 1890 mm - Extraction connection: 150/120 mm - with 4-roller feed mechanism Weight: 600 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Bsdpfxszmgqte Anyjdi Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: used, all stainless steel hopper capacity 270L Bdedjz Sy Etepfx Anyji die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools. Bdodpfx Ajzvychonysi