Used Weber Cr5E for sale (91)

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators Cgedpeb A Sxgofx Aaqon -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min Cgsdpfxoydmkpj Aaqen transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: ready for operation (used), functionality: fully functional, Weber slicing line mod MCS 902 whit check weigher and outfield conveyor direct taken out off production site here in Sweden. Cgjdpfx Aaoydpd Esqjn

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Remarks: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/cooling: available Max. admissible operating temperature: 300 °C Max. admissible operating overpressure: 32.0 bar Cgedpfxsxqba Do Aaqjn Max. overpressure: 6.00 bar Top cover: removable / hinged top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: chemical industry VESSEL Max. admissible operating temperature: 300 °C Stand type: ring HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole/Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: centrally mounted on top cover Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top cover wall thickness: 15.8 mm

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Cgodpfx Aaovryhyjqon

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Cjdpfsyciydox Aaqjgn Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Internal diameter: 690 mm Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Cgjdpfx Aajyhcabsqon Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new Csdpfx Aoyhcl Dsaqsgn

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Cedpfxeyhckas Aaqogn Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Cedjyhcc Aopfx Aaqsgn Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Cgsdpfxex U A Iaj Aaqjn Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), A high-performance slicer and portioner Weber including scale, knife sharpener and a conveyor belt is available. Knife type: circular knife, knife diameter: 460mm, slicing thickness range: 0.1mm-50mm, design: 1200mm, machine dimensions X/Y/Z: approx. 2500mm/1200mm/2200mm, weight: approx. 1500kg. An on-site inspection is possible. Cedpfeygmbtex Aaqegn

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of manufacture: 2022 / Electric start / DEMO unit Sales price: €10,090.00 net / €12,007.10 gross Warranty until 10 / 2026 Technical data Engine: Hatz Diesel Max. engine output: 11.0 (15.0) kW/hp Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors of the CR series are distinguished by their high compaction performance and superior efficiency. They are the first choice for compaction jobs ranging from traditional road and civil engineering to paving work. Balanced running properties, high smoothness, and low hand-arm vibration ensure maximum operating comfort. - Precise, stepless, electro-hydraulic changeover between forward and reverse via tip control - Engine protection system - Throttle and hydraulic control lines protected within the guide bar - Low hand-arm vibration - Fatigue-free operation with adjustable-height steering handle - Protection for machine and engine through frame guard and full engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy service: all maintenance components are easily accessible - Safe and quick loading via large, foldable crane eye - Secure lashing for transport with additional lashing points in the engine console - Increased operator comfort with electric start, hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, landscaping, subbases for paving, compacting pavers, and compacting sand, gravel, or crushed stone We have a large selection of various vibratory plates in stock, available for immediate delivery! Simply contact us at ... for more information. Upon request, we are happy to provide you with a financing offer. We are an official Weber MT sales and service partner We are an official JCB construction equipment sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Csdpfx Aaeyfvidsqogn Subject to prior sale and errors! Internal No.: 080682 = More information = Contact Tobias Ebert for more information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3 years manufacturer's warranty Technical Data Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/HP Weight: 743 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Evaluates signals from the machine's integrated sensors and displays them graphically using symbols - Similar to the previous engine protection by Weber MT, the engine shuts off whenever continued operation could cause engine damage - The user is also shown, via symbols, how to remedy the displayed fault - If the air filter is too dirty, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also includes COMPATROL compaction control, now in a new design - It displays the compaction progress to the user via a clear and easy-to-read bar graph - Machine operation has also changed: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically regulates the correct speed The reversible soil compactors of the CR series stand out for their powerful compaction performance and highest efficiency. They are therefore the first choice for compaction works in road and civil engineering as well as paving. Balanced running characteristics, high operating smoothness, and low hand-arm vibrations ensure excellent operator comfort. CR 9 Economical machine with strong compaction performance: Cjdpfx Aajyfvaisqogn - Infinitely variable forward and reverse travel, hydraulic switching - Throttle and hydraulic switching integrated and protected in the guide handle - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading via large foldable crane eye - Secure transport with additional lashing eyes on the engine console - Improved operator convenience with electric start - Application areas: road and civil engineering, paving, and, due to the low overall height and working width, the CR 9 is also ideal for use in trench shoring We have a very large selection of various vibratory plates in stock and immediately available! Mr. Herden (Tel. ...) will be happy to assist you. We are also happy to provide you with a financing quote on request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Csdpfx Aaox Twcpeqjgn

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 Hatz Diesel Reversible Plate Compactor / Year of manufacture: 2022 / Electric start / DEMO unit Sales price: €9,490.00 net / €11,293.10 gross Warranty until 01/2026 Technical data Engine: Hatz diesel Max. Power output: 11.0 kW (15.0 HP) Weight: 736 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors of the CR series stand out with strong compaction performance and maximum efficiency. They are the first choice for compaction work in road construction, civil engineering, and paving applications. Balanced operating characteristics, smooth running, and low hand-arm vibrations ensure a high level of operator comfort. CR 9 The new upper class: powerful, robust, reliable operation: - Precise, stepless, electrohydraulic changeover of forward and reverse via tip-switch - Throttle cable and hydraulic changeover laid securely within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide handle - Protection for machine and engine thanks to protective frame and full engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and fast loading due to large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points in the engine console - Enhanced operator comfort due to electric start with operating hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trenching, landscaping, sub-bases for paving, settling of pavers, and compaction of sand, gravel, or crushed stone We have a very large selection of various plate compactors immediately available from stock! Just contact us at ... We are also happy to provide you with a financing offer upon request. We are an official Weber MT sales and service partner We are an official JCB Construction Equipment sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. Cgsdpsyfrmlefx Aaqon We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can deliver the complete Weber MT range for you! Subject to prior sale and errors! Internal ref. no.: 066149 = Further information = Please contact Tobias Ebert for further information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 7 WSA Hatz Diesel Reversible Plate Compactor / Electric Start / New machine / In stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer’s warranty Technical Data Engine: Hatz Diesel Max engine output: 7.9 kW (10.7 hp) Weight: 484 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Weber Smart Assist (WSA) - Evaluates signals from the machine’s internal sensors and displays them graphically using symbols - Similar to previous engine protection on Weber MT units, the engine will automatically shut down if continued operation could cause engine damage - The operator is also shown symbols indicating how to rectify any displayed faults - If the air filter becomes heavily soiled, step-by-step instructions are shown for cleaning and replacing the filter element - The Weber Smart Assist also includes the newly redesigned COMPATROL compaction control - It provides a clear and easily understandable bar graph to display compaction progress - Operation of the machine has also been updated: following engine start, vibration is activated at the push of a button - The usual throttle lever is no longer required, as the engine speed is regulated automatically The reversible plate compactors of the CR series impress with their powerful compaction performance and maximum efficiency. This makes them the first choice for all compaction tasks from classical road and civil engineering to paving work. Well-balanced running characteristics, exceptionally smooth operation, and low hand-arm vibrations ensure high operator comfort. CR 7 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle and hydraulic switching cables routed inside the guide bar for protection - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide bar - Protection for the machine and engine due to engine guard frame and cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Simple maintenance with all service points easily accessible - Safe and fast loading due to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing eyes on the engine console - Greater operating comfort with electric start - Typical applications: road construction, civil engineering, paving; thanks to its low overall height and working width, the CR 7 is also ideally suited for trench shoring We have a wide selection of different vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. On request, we are happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. Codeyfqvrjpfx Aaqjgn We are...

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden will be happy to assist you (by telephone). Weber CR 8 Hatz Diesel Reversible Compactor / Year of manufacture: 2022 / only 117 h / Electric Start / DEMO unit Sales price: €8,490.00 net / €10,103.10 gross Technical Data Engine: Hatz diesel Engine output max.: 10.0 kW (13.6 hp) Weight: 601 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm The reversible soil compactors of the CR series stand out with their powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks in traditional road and civil engineering as well as paving applications. Balanced running characteristics, high smoothness in operation and low hand-arm vibrations ensure excellent operator comfort. CR 8 The new top class: powerful, robust, reliable: - Infinitely variable forward and reverse travel - Hydraulic switching of throttle cable, with hydraulic lines protected within the handlebar - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable guide handle - Protection of machine and engine through frame guard and full engine cover - Reduced maintenance effort due to self-tensioning centrifugal clutch - Easy servicing, all maintenance elements readily accessible - Secure and fast loading thanks to a large, foldable lifting eye - Safe fastening for transportation via additional lashing eyes on the engine mount Cgjdpeyfqu Uefx Aaqen - Greater operator comfort with electric start and hour meter - Areas of application: road and civil engineering, trenching, sub-base construction for paving, compaction of sand, gravel or crushed stone We carry a large selection of different reversible plate compactors in stock, available for immediate delivery! Mr. Herden (ph. ) will be happy to assist you. Upon request, we can also provide a financing offer. We are an official sales and service partner for: - Weber MT - Magni telehandlers - Gierking GMT - OilQuick - Holp - DMS - Seppi M. - Westtech - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale! Internal no.: 066141 = More information = Please contact Tobias Ebert for further details.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / New Machine / In Stock & Immediately Available Sale price: €8,990.00 net / €10,698.10 gross 3-year manufacturer warranty Technical Data Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 hp) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the machine's sensor system and graphically displays them as symbols - Similar to the previous engine protection system from Weber MT, the engine will shut down whenever continued operation could lead to engine damage - Users are also shown symbols indicating how to resolve displayed faults - If the air filter is excessively dirty, it provides step-by-step instructions on cleaning and replacing the filter element - The Weber Smart Assist also includes the compaction control "COMPATROL", now with a new design - It displays the progress of compaction on an easily readable and understandable bar graph - The machine’s operation is also improved: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engines automatically adjust to the correct speed The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are the top choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running characteristics, low running noise, and minimal hand-arm vibrations provide a high level of operator comfort. Cjdpfxsyfqp Se Aaqogn CR 6 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic shifting - Throttle cable and hydraulic shifting lines routed and protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection with motor guard frame and engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy service—maintenance points are easy to access - Secure and fast loading using a large, foldable crane eye - Safe lashing for transport thanks to additional lashing points on the engine console - Enhanced operator comfort with electric start - Areas of use: road and civil engineering, paving, and—thanks to the low height and working width—the CR 6 is also ideal for trench shoring work We have a very large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. We would also be pleased to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Year of construction: 2022, condition: used, Mr. Herden will happily assist you with any inquiries regarding the machine (by phone). Weber CR 8 MDM Hatz Diesel Vibratory Plate Compactor / Year of manufacture: 2022 / Electric Start / DEMO Unit Sale price: €8,590.00 net / €10,222.10 gross Warranty until 10/2026 Technical Specifications: Engine: Hatz Diesel Max. engine output: 10.0 kW (13.6 HP) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Cgsdpfeyfqlysx Aaqjn The reversible soil compactors of the CR series stand out with high compaction performance and maximum efficiency. They are therefore the first choice for compaction work in classic road and civil engineering, as well as paving. Balanced running characteristics, low hand-arm vibration, and high smoothness ensure excellent operating comfort. CR 8 The new premium class: powerful, robust, reliable: - Infinitely variable forward and reverse travel - Engine protection - Greater operating comfort thanks to electric start with hour meter - Hydraulically actuated and protected throttle cable, integrated into the guide handle - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Protection for engine and machine via protective frame and full engine cover - Reduced maintenance requirements due to self-tensioning centrifugal clutch - Easy maintenance thanks to accessible service points - Safe and quick loading with large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Applications: road and civil engineering, trench work, subbase for paving, and compaction of sand, gravel, or crushed stone We have a large range of different plate compactors in stock for immediate delivery! Simply contact us at / . We are happy to provide a financing offer upon request. We are an official sales and service partner for Weber MT. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Holp. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Errors and prior sale excepted! Internal No.: 078050 = Further information = Please contact Tobias Ebert for further details.

Condition: used, Year of construction: 2020, For inquiries about attachments, Mr. Herden will assist you (via phone). Weber TRC 86 Trench Roller Year of manufacture: 2020 with radio remote control 112 operating hours Cedpeyfqf Tofx Aaqsgn Price: €16,890.00 net / €20,099.10 gross Operating weight according to CECE: 1,390 kg Drum width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Avg. static linear load CECE: 9.80 kg/cm Gradeability: 50%, depending on ground conditions Working/transport speed: m/min, depending on ground conditions Drive: hydrostatic, four drums Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine output, max.: 19.5 kW / 26.7 HP Engine output at working speed: 15.6 kW / 21.3 HP at 2,600 rpm The machine is equipped with a radio remote control. The controller can be charged inside the roller. We are an official Weber sales and service partner, Seppi M. sales and service partner, and also represent brands such as DMS, Magni Telescopic Handlers sales and service partner, JCB Construction Equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Rental possible = Further information = Please contact Tobias Ebert for more details.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden (by phone at ...) will be happy to assist you. Csdpfx Aaeyfp Aweqogn Weber CR 8 WSA Hatz Diesel Vibratory Plate / Electric Start / New unit / In stock & immediately available Sales price: €11,190.00 net / €13,316.10 gross 3-year manufacturer's warranty Technical specifications: Engine: Hatz Diesel Maximum engine power: 10.5 (14.3) kW/hp Weight: 608 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Weber Smart Assist (WSA) - Evaluates signals from the built-in sensors and displays them graphically using symbols - Similar to the previous engine protection system from Weber MT, the engine will shut down whenever continued operation could lead to engine damage - Symbols also indicate to the operator how to resolve the displayed fault - In the event of a heavily clogged air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also includes the COMPATROL compaction control, now presented in a new design - Provides the user with a clear, easy-to-read bar graph showing compaction progress - The machine operation is also new: after starting, vibration is activated with the push of a button - There is no throttle lever, as the engine automatically adapts to the correct speed The reversible soil compactors of the CR series boast powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks in everything from classic road and civil engineering to paving applications. Their balanced running characteristics, high smoothness, and low hand-arm vibrations ensure excellent operating comfort. CR 8 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic switching - Throttle cable and hydraulic switching integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection of machine and engine via protective frame and engine cover - Reduced maintenance requirements due to self-tensioning centrifugal clutch - Easy servicing as all maintenance components are readily accessible - Safe and fast loading with a large foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Increased operator comfort with electric start - Areas of application: road construction, civil engineering, paving work, and—thanks to the low overall height and working width—the CR 8 is also ideal for trench shoring We have a very wide selection of different vibratory plates in our warehouse, all immediately available! Mr. Herden (Tel. ...) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We...

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder Cgodpfxsv Tahio Aaqon -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg Cjdpfxjdp Dvtj Aaqjgn

Condition: good (used), Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm Cgsdsdp Dvpspfx Aaqon -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg