Used Bauer Irrigation Equipment for sale (281)

Condition: new, Bauer DK66 SZ3-2211/163 L gear motor M 16435551-01, serial number as per photo, hole spacing of the mounting holes: 91 x 91 mm, Ø drive shaft: 25 mm, unused with signs of storage, 100% functional, scope of delivery as per photos Fedji D E Dcepfx Affjgb

Condition: new, Bauer E3-20/DO 56-170 B gear motor SN:221314-3 with E 003 B brake, terminal box cover missing see photo, unused, 100% functional, scope of delivery as per photos Fjdsi D E Dgopfx Affjgb

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. Fgjdpfsy Nuhnjx Affeb The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: ready for operation (used), Year of construction: 2007, cutting diameter 320 mm saw band length 3400 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 400 mm capacity 45 degrees: flat LI 320 x 280 mm capacity 45 degrees: flat RE 320 x 260 mm capacity 60 degrees: flat RE 320 x 140 mm band speed 35 + 70 m/min work height max. 930 mm voltage 400 V total power requirement 2.67 kW weight 950 + 250 kg well-maintained condition (!!) current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - ?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically Fodpfx Asym D Droffsgb * electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydraulic miter adjustment left right - Electro-hydraulic material clamping - electro-hydraulic infeed from the saw arm * steplessly adjustable (cutting pressure control) - Operating instructions (PDF) * Special accessories included : - BAUER material feed unit - Micro-dosing device (spray oiler)

Condition: used, Year of construction: 2010, Vertical metal band saw Fsdpfx Afsyfib Hefogb Manufacturer: Bauer Model: VG 450 L Year of manufacture: 2010 Cutting capacity: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material feed height: 930 mm Saw band wheel Ø: 450 mm Saw band dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min. Optional stepless adjustment Saw band guide: Deflection rollers + carbide jaws Material clamping: manual via handwheel + trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spraying device Compressed air: min. 2 bar Designed for mitre cuts Saw motor: 2.2 kW Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Space requirements (L/W/H): 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Operating instructions ä16426

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Offer consists of: • Year of manufacture: 2020 • Impressions: approx. 64 million • SW4 perfecting • FAPC fully automatic plate change • ALV2 extended delivery • 18,000 sheets/h • 'CX' carton package • ErgoTronic ColorControl • Extended camera system • Tecnotrans Beta.f • New rollers: replaced in 2025 Fgodpfx Aeyyyb Ujffjb Comprehensive technical documentation available on request. Video available.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total height: 1,800 mm, total length: 600 mm, total width: 780 mm, overall weight: 280 kg, table height: 930 mm, workpiece width (max.): 390 mm, workpiece height (max.): 210 mm, spindle motor power: 750 W, table length: 520 mm, table width: 470 mm, workpiece diameter (max.): 230 mm, Equipment: documentation/manual, We are offering this ready-to-use Bauer Maschinenbau HS 300 ZA vertical machining center, year of manufacture unknown. For sale is a Bauer automatic band saw HS 300 ZA (400 V). Used, well-maintained, and ideal for workshops, production facilities, or material cutting applications. Technical Data (400 V) Voltage: 400 V Saw motor: 0.75 kW Weight: approx. 280 kg Dimensions Length: 600 mm Width: 780 mm Height: 1800 mm Cutting Capacity Cutting height (H): 210 mm Cutting width (W): 390 mm Opening (A): 230 mm Saw Band Saw band wheels: Ø 400 mm (cork surface) Fodpfsy Exwrjx Affegb Saw band length: 3000 mm Saw band width: 3–20 mm Table Table size: 520 × 470 mm Table height: 930 mm Tilt range: 10° left / 30° right Saw band guide: sliding or roller guides Documents / Identification EC Declaration of Conformity available (CE). Year of manufacture: 2004 Machine No.: 04-38012 Machine type (according to declaration): 4001 Price negotiable, net plus VAT. Location / Collection 93073 Neutraubling Pickup only – loading can be organized upon arrangement. Inspection possible. Mobile: +4916097215567 If you have any questions or require more information, feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,000 kg, fuel type: diesel, color: red, power: 50 kW (67.98 HP), total length: 2,270 mm, total width: 880 mm, total height: 1,120 mm, Continuous output: 50 kW / 62.5 kVA Maximum output: approx. 55 kW Voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 rpm Power factor: cos φ ≈ 0.8 Engine: 4-cylinder diesel Displacement: approx. 4.15 litres Cooling: water-cooled Generator: brushless, AVR (automatic voltage regulation) The unit is equipped with ATS (Automatic Transfer Switch) CE marking: YES Fgodpfxey Dtwkj Affsb Please do not hesitate to contact us for further questions.

Condition: used, New: Yes Please contact us for more information. Fgjdpfx Afsy Aav Djfsb

Condition: used, Year of construction: 2007, Offset 5 color KBA Rapida 74-5 Year: 2007 Number of impressions (mio): 69 Machine control - ColorTronic - ErgoTronic Console - Lithec Feeder - Suction feeder table - Double sheet control Printing units - Number of printing unit(s): 5 - Straight machine Fodpfx Afjyibqfjfjgb - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Cooling system: Baldwin Balcontrol Delivery - Standard delivery - Non-Stop delivery - Powder spray: Weko AP232 Accessories - Compressed air compressor: Kaeser Max. output (s/h): 15000 Max. sheet size (mm): 605 x 740

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 1,000 kg, construction height: 650 mm, empty load weight: 61 kg, total length: 2,400 mm, construction width: 600 mm, Crane arm Condition: Ready for use and fully functional Fsdsu Dy Aljpfx Affegb Technical condition: very good Description: Length: 1600 - 2540 mm Attachment on forks: 220 x 80 mm

Condition: used, Year of construction: 2000, functionality: fully functional, KBA RA 105-6 SW2 PHWA Year: 2000 Impressions: approx. 115 million Format: 740 x 1050 mm Perfector: 2+4 Extended delivery Semi-automatic plate change All wash devices (ink roller, blanket, impression cylinder) Varidamp dampening Baldwin refrigeration-recirculation Graphix Hitronic 2000 Register controls Intercom system Fgjdoy Dummjpfx Affob Ergotronic diagnostic

Condition: used, Year of construction: 2006, functionality: fully functional, KBA RA 105-8 SW4 Year: 2006 Impressions: approx. 238 million Size: 740 x 1050 mm Semi-automatic plate change All wash devices (ink roller, blanket, impression cylinder) Baldwin Graphix Fgedjy Dt E Uopfx Affeb Register Controls Ergotronic Colortronic

Condition: used, power capacity 1,5 kW volt 380 V ampere 5,75 A Fjdoytg Uaopfx Affegb

Condition: used, power capacity 2,2 kW volt 380 V ampere 5,3 A Fjdpfx Ajytg T Neffjgb

Condition: used, power capacity 1,1 kW volt 380 V Fgsdpfx Afeytg T Ajfjb ampere 2,8 A

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, total width: 2,440 mm, total length: 3,320 mm, total height: 2,130 mm, overall weight: 8,200 kg, input frequency: 50 Hz, input current: 30 A, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, space requirement width: 2,440 mm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Fgodpfx Afsx Hzm Sjfsb

Condition: good (used), Year of construction: 1997, cutting diameter 450 mm saw band length 4150 x 34 x 1.1 mm capacity 90 degrees: flat 450 x 480 mm capacity 45 degrees: flat LI 450 x 310 mm capacity 45 degrees: flat RE 450 x 290 mm band speed 35 + 70 m/min work height max. 930 mm total power requirement 2.35 kW voltage 400 V weight 950 kg range L-W-H 2150 x 1150 x 2115 mm well-maintained condition (!!) current new price incl. accessories ~ 50.000 Euro special price on request Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - electro-hydraulic mitre adjustment left right * Only the saw frame swivels, everything else remains fixed * incl. ELGO digital value display - electro-hydraulic material clamping - electro-hydraulic infeed from the saw frame * Infinitely adjustable (cutting pressure control) - Operating instructions * Special accessories included : Fodpeyk Dhlsfx Affjgb - approx. 3.000 mm feed roller conveyor ... roll width 500 mm - approx. 3.000 mm motorized infeed roller conveyor ... Roll width 500 mm - approx. 6.000 mm outfeed roller conveyor with digital display .. Roll width 500 mm - Micro-dosing device (spray oiler)

Year of construction: 1995, condition: ready for operation (used), An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible. Fgsdpfxjyv H Hcs Affob

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg Fodpfx Ajhrkrwsffjgb good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Fodjhrkrpjpfx Affogb Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition Fsdpfxsxrgupj Affegb

Condition: used, functionality: fully functional, Year of construction: 2022, total length: 2,200 mm, load capacity: 2,500 kg, empty load weight: 203 kg, construction width: 540 mm, Crane arm Load centre: 500 Fsdpfx Afjyul H Dsfsgb Condition: Ready for use and fully functional Technical condition: good Description: The telescopic crane hook extends the reach of the forklift, entry pockets (185 x 85mm), chain safety to prevent accidental slipping, internal telescopic section extendable 8 times, each position secured with a pin, 2 swivel load hooks, 14 possible hook positions, height-adjustable, each position secured with a pin, 3 adjustable angles: 15°, 30° or 45°, surface: RAL 5012

Condition: used, Year of construction: 2008, Offset 2 color with coating KBA Rapida 105-2+LV CX Year: 2008 Number of impressions (mio): 48 Machine control - ColorTronic - ErgoTronic Professional Fgjdpsx Exg Tjfx Affeb - LogoTronic Basic - CX Package Feeder - DriveTronic feeder - Non-Stop feeder Printing units - Number of printing unit(s): 2 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Dampening cooling and circulation system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 1 - Harris & Bruno chambered ductor blade system - Number of Anilox roller(s): 1 Drying - IR + hot-air dryer in delivery Delivery - Extended delivery - Powder spray: Grafix Accessories - Compressed air compressor

Condition: excellent (used), Year of construction: 1999, Cutting diameter round: 200 mm Saw band length: 2,830 mm Fgjdpjyvtcwofx Affeb Cutting angle adjustment: 45° right/left