Used Fmb Titan G for sale (27)

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. Kledpfjgculvjx Acbst It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 2005, Technical details: Total power requirement: 6,4 kW machine weight approx.: 250 kg dimensions L x W x H: 1,4 x 0,9 x 1,4 m 2 pieces DOSING SYSTEM available. technical Details: Klodpfx Acsu N E Nuobjt - system pressure 125 bar - flow rate 3 l/min - reservoir preload pressure 80 bar - Motor SEW Eurodrive, 1410/1710 U/min erquipped: - hydraulic tank with 200 liter content, size L:850 x W:630 x H:380mm - oil basin size L:1100 x W:850 x H:380mm *

Condition: like new (used), Year of construction: 2019, functionality: fully functional, saw band length: 2,490 mm, I sell mettal cuting saw , not much used, in very good condition.... Ksdex Rcmbjpfx Acbjlt

Condition: used, Year of construction: 2007, Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Kjdpfx Ajyttm Ajcbjlt Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2007, Article: bar loading magazine Manufacturer: FMB Kedpjyttmvsfx Acbelt Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, TECHNICAL DETAILS - bar diameter : 0,8 - 18 [mm] - bar length : 3200 [mm] - stroller diameter : 15 [mm] - channel diameter : 18 [mm] Kodpfx Asuhbifjcbjlt - necessary power : 1,5 [kw] - loading time : approx. 22 sec (with bar of 3200 mm) - oil filling : 50 [l] - viscosity 100 [cSt] at : 40 [°C] - weight : 500 [kg] - max. remnant length : 300 [mm]

Condition: used, TECHNICAL DETAILS - bar diameter : 0,8 - 18 [mm] Kedsuhbh Uopfx Acbolt - bar length : 3200 [mm] - stroller diameter : 15 [mm] - channel diameter : 18 [mm] - necessary power : 1,5 [kw] - loading time : approx. 22 sec (with bar of 3200 mm) - oil filling : 50 [l] - viscosity 100 [cSt] at : 40 [°C] - weight : 500 [kg] - max. remnant length : 300 [mm]

Condition: good (used), Year of construction: 2002, functionality: fully functional, Profile machining center, portal milling machine Type: MBZ 72/80-3 Year of manufacture: 2002 Condition: used Technical data: x-axis: 7000mm y-axis: 1000mm Ksdpfx Acsy S Hazobolt z-axis: 370mm Spindle drive: 6.8KW Spindle speed: 20,000 RPM Tool holder: SK30 Pull stud: DIN 69872 Tool changer: 12 Special equipment/accessories: – Vögele central lubrication system – Niels minimum quantity lubrication system – Vacuum system with 8 clamping modules – 8 tool holders incl. tools – Workpiece probe incl. tool holder – Documentation

Year of construction: 2005, condition: used, machine/vehicle number: 15-230068, With digital display Ksdpjy Sqkqjfx Acbjlt

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Bar feeder FMB turbo 5-65 / 3200 "B" Comes from a Mazak Quick Turn 200 MSY Hardly used / Like new / Available immediately Kledpoyzp Adefx Acbot List price 2020: 28,000 EUR

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Klodpfx Aey D Tn Aecbst

Year of construction: 1990, condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s Kjdjdlm Dhjpfx Acbolt elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz Kodpfxexx R S Ee Acbelt - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Kodsxx Sawspfx Acbolt Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Kljdpfxey Ax Tuj Acbjt

Year of construction: 2009, condition: ready for operation (used), This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information. Kodpfsx D Iwijx Acbjlt

Condition: used, Year of construction: 2007, FMB Turbo 3-36/3200/C Material rods diameter 3 – 38 mm Max. rod length: 3,200 mm Kjdpfxeh Nf N Se Acbelt Year of manufacture 2007 Weight without oil filling: approx. 750 kg

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm Ksdpewaauujfx Acbslt

Condition: good (used), FMB bar feeder 2.20 metres Ideal for small diameters, max. 20 mm Kjdpfx Ajyww S Eecbolt Condition: good used condition

Condition: used, Year of construction: 2016, Machine data can be found in the pictures Klodpfxsv U Ea Tj Acbot

Year of construction: 2006, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: FMB Blickle, hydraulic unit with hydraulic tank from rotary transfer machine Uldrian TSM 22-8 -Hydraulic pump: pressure up to 120 bar -Flow rate: 22 l/min -Motor: 4 kW / 1500 rpm -Hydraulic tank: with level indicator, tank capacity 100 l -Oil cooler -Individual components: see photos -Dimensions: 720/500/H1630 mm -Weight: 293 kg Klsdpem Dyh Refx Acbjt

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Klodpfxjx S Rbps Acbet

Condition: good (used), Year of construction: 2014, functionality: fully functional, control type: NC control, The stand is great. Channel set d55 Kodsyg Datopfx Acbolt

Condition: used, Year of construction: 1999, FMB Turbo bar feeder Turbo 10-65XT/3200, previously installed on a Traub TNC65 TX8H Kedpfxjyazh Ij Acbelt

Condition: used, TECHNICAL DETAILS - Max. bar length : 3200 [mm] Kljdpfxju Hacke Acbst - Pusher diameter : 12 [mm]