Indexing Device

WMW HECKERT

Condition: used, max. workpiece diameter 500 mm threading length 800 mm max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,2 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m Gjdpfx Aboyy A Spj Dsua

Condition: used, total width: 1,600 mm, total length: 2,500 mm, total height: 1,700 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Table width: 450mm - Travel Z: 300mm - Max. stroke: 700mm - Model: Horizontal - Travel Y: 1200mm - Table length: 700mm - Travel X: 800mm - Throat depth: 450mm - Model: - Control: Conventional - Motor power: 7.5kW - Transport dimensions: 2500mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gjdewnicwjpfx Ab Deua Lukas van Rossum

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Gjdpfxsx U Ects Ab Dsua Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Workpiece Clamping & Table: • Pallets according to DIN 55201, maximum load capacity 5,000 kg • Tilting moment: 50,000 Nm • Rotary table: 10 rpm, resolution 0.001°, tangential moment (clamped): 25,000 Nm Pallet & Tool Changer: • Automatic pallet changer for 3 pallets, changeover time 47 s • Automatic tool changer, chip-to-chip time: 13 s • Tool weight up to 15 kg • Drum magazine with 320 storage slots (4 drums), max. tool diameter 250 mm, max. length 450 mm, max. weight 35 kg Travel & Feed Rates: • Feed range: 1–40,000 mm/min • Rapid traverse: 40 m/min • Acceleration (x/y/z): 4 / 5 / 3 m/s² • Feed forces: max. 20 kN Main Spindle: • Spindle diameter: 100 mm • Speed range: 20–6,000 rpm (optional 10,000 rpm, 2-stage gearbox) • Tool interface: SK50 (DIN 69871), optional BT50 or HSK-A100 • Through-spindle coolant, max. 70 bar Coolant System: • Coolant unit with gravity fleece filter • Supply pressure: 10–70 bar, tank volume 3,400 l • Temperature stabilization and compensation for high precision • Optional: Sag and spindle expansion compensation, spindle warm-up program • Hinged belt chip conveyor (optional, with fleece or vacuum filter) • Connection to central coolant system possible Performance & Accuracy: • Continuous power consumption as per installation plan • Sound pressure level ≤ 80 dBA • Positioning accuracy (x/y/z): o Tp = 0.006 mm o Psmax = 0.005 mm Guedpfx Aeyzr Ayob Dja o Umax = 0.004 mm General Data: • Net weight (complete): approx. 26,500 kg • Color scheme: Light grey RAL 7035 / Mouse grey RAL 7005 / Ruby red RAL 3003 • Operating voltage: 400 V / 50 Hz • Documentation in German language

Condition: new, diameter / mm Cutting (quantity) / weight / kg Gedpfoxn Aqlox Ab Djua ROMAI Angle Head S10-SK50-HD20-C2F

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,150 h, travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,500 W, number of slots in tool magazine: 80, number of axes: 4, This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 × 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details. • Temperature range: 5–35 °C • Operating hours: 41,150 hours • NCU type: NCU 710.2 • NC software version: V02.07.01.06 • MMC software: 07.06.02.02 • Standard software cycles: 07.05.11 • Working spindle speed (standard): 10000 rpm • Working spindle speed (option): 12000 rpm • Tool magazine type: Chain magazine • Workpiece pallets: 2 • Pallet size: 400 × 500 mm • Spindle torque (option): 200 Nm • Coolant pressure (option): up to 80 bar • Coolant tank capacity: 1350 l • Coolant flow (swivel shower): approx. 70 l/min • Axis measurement system: Heidenhain LC483 • Rotary axis measurement: Heidenhain RCN226 • Position frequency analysis X-axis: 29 Hz • Position frequency analysis Y-axis: 54 Hz • Position frequency analysis Z-axis: 52 Hz • Spindle + motor replaced: July 2025 Additional equipment • Vapour extractor: AFS 600 Gusdjyzn Dgopfx Ab Dea Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2009, operating hours: 22,100 h, functionality: fully functional, HECKERT HEC 1250 ATHLETIC PINOLE For sale is a Heckert HEC 1250 Athletic Pinole horizontal machining center, year of manufacture 2009, currently in ongoing industrial operation. The machine is in exceptionally well-maintained condition and fully functional. It has undergone consistent preventive maintenance over the years. Documented maintenance was performed in 2012, 2014, 2016, 2017, 2018, and 2019. Documented inspections took place in 2021, 2022, and 2023. In 2025, the ZP-KGT was replaced. The machine has approximately 50,100 operating hours. The machine is equipped with a Siemens SINUMERIK 840D Solutionline control and is ideally suited for machining large and heavy prismatic workpieces. The combination of NC rotary table, quill support, SK50 interface, and large tool magazine makes the unit highly suitable for multi-sided machining, heavy-duty cutting, and complex machining tasks requiring minimal setups. Technical Data Manufacturer: Starrag Heckert Model: HEC 1250 Athletic Pinole Year of manufacture: 2009 Machine type: Horizontal machining center Control: Siemens SINUMERIK 840D Solutionline Potential total number of axes (according to documentation): 5 Travel X-axis: 2200 mm Travel Y-axis: 1500 mm Travel Z-axis: approx. 1850 mm Tool holder: DIN 69871 SK50 Tool magazine: 280 positions Max. tool length: 450 mm Max. tool diameter: 250 mm Max. tool weight: 35 kg Measuring probe: Renishaw MP10 Pallet system: 2-pallet system Pallet size: 1000 x 1250 mm Additional pallets (as per documentation): 4 pallets with threaded holes / T-slots Mains connection: TN-C, 3/PEN AC 400 V Rated current: 250 A Connected load: 130 kW Compressed air: 6 bar Operating hours: approx. 50,100 h Features Gjdpex Syhrsfx Ab Deua Quill support NC rotary table 280-position tool magazine Renishaw measuring probe MP10 Oil pan Platform Coolant system Chip suction unit Documentation / operating manuals included Maintenance and history Documented maintenance: 2012, 2014, 2016, 2017, 2018, 2019 Documented inspections: 2021, 2022, 2023 2025: ZP-KGT replaced Availability Machine located in Augsburg Dismantling possible from 31.03.2026 Collection by 29.05.2026 Viewing by appointment Scope of delivery Machine as described Without tools Without additional spare parts

Condition: excellent (used), Year of construction: 1985, Stroke: 320mm Table dimensions: 630mm Largest rotation angle: 10° Gedpsyvt D Iefx Ab Dsua Year of manufacture: 1985

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Fritz-Heckert-Werk Karl-Marx-Stadt Model: GFL 400x1000 Machine designation: GFL Year of manufacture: 1962 Serial number: 47015 Machine type: Long thread milling machine Total weight: 3 t Table size: 400 x 1000 mm Power supply: 3~ three-phase Guodpoyyvtgofx Ab Dja Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Connected load: 3.7 kW Rated current: 8 A Fuse: 10 A Condition: operational

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Godpfx Aoxxvqaeb Djua

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Gusdpfxsx N Atfe Ab Doa

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Gusdpfx Aeyyy Nrob Doa

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filter unit High-pressure coolant through spindle Gusdpfx Ajyx Um Nsb Dea