Four-side planer beam planer

Weinig P 23 E

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Ffsdpfxoxp U R He Abrst

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table Ffedpfx Aevgnb Rsbrjt One driven roller in the table at the exit. With tool.

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw - Vertical right/left 7.5Kw Ffjdpewrxuwofx Abrst - Horizontal top 7.5Kw - Horizontal bottom 4Kw - Year 1997 (CE)

Condition: as good as new (ex-display), Hauslhof CTR800Hydraulik block bandsaw, demonstration machine, log diameter up to 830 mm, overall length 5800 mm, width 2300 mm, equipped with a hydraulic system for clamping, securing, rotating and lifting the log. Total engine output at 100% duty cycle: 10 kW. Options: CTR800H-Ver3, CTR800H-KSD, CTR800H-STH, CTR800H-STH-V, CTR-SSP, CTR-11, CTR-VOR, CTR-AMP, CTR-EGL, CTR-LG Automat, CTR-Pumpe-EA. Fedpsvrvrnofx Abroft

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right Ffsdpsrm Rxwjfx Abrjt - vertical left - horizontal top - horizontal bottom Year 1994 V 380/50

Condition: used, The Weinig Unimat 23EL planer and moulder is designed for four-sided planing and profiling of wood, featuring a mobile spindle for automatic adjustment, a grooved bed for short and curved workpieces, and a long planing table. spindles: 10 spindle 1: Bottom / 5.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm Fjdjw H Iv Tjpfx Abroft spindle 3: Left / Motor together with spindle 2 / 40 mm spindle 4: Right / 11 kW / 40 mm spindle 5: Left / 5.5 kW / 40 mm spindle 6: Top / 11 kW / 40 mm spindle 7: Bottom / 11 kW / 40 mm spindle 8: Top / 7.5 kW / 40 mm spindle 9: Bottom / 7.5 kW / 40 mm Spindle 10: Universal / 4 kW / 40 mm working width: 230 mm working height: 160 mm feed: 5.5 kW / 6 - 36 m/min

Condition: used, Year of construction: 2000, Weinig Unimat 23E planer and moulder for four-sided planing and profiling of wood, with a mobile spindle for automatic adjustment and a grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long planing table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table, available upon request. spindles: 5 Fsdewztw Sepfx Abroft spindle 1: Bottom / 40 mm / 5.5 kW spindle 2: Right / 40 mm / 7.5 kW spindle 3: Left / 40 mm / Common motor with spindle 2 spindle 4: Top / 40 mm / 7.5 kW spindle 5: Bottom / 40 mm / 5.5 kW working width: 230 mm working height: 160 mm

Condition: used, SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES - S/N 25 906/001 Ffodomxliaepfx Abret

Condition: used, Hydro-fine planing machine Weinig Uniplan 23 for two-sided surface finishing, as an alternative to sanding (e.g. in window construction) with high-performance spindles. * Very good original condition spindles: 2 Spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) working width: 230 mm working height: 120 mm Spindle ø: 50 mm Ffjdpfxet Rmbmj Abret feed: 3 kW // max. 36 m/min Spindle speed: 7,200 rpm Jointers: Yes jointer: Yes Counter bearing: Yes Short parts package: Yes

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake Ffsdpfx Abowyulusrot 2. Right spindle with separate motor, 7.5 kW and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4