Round bending, plate bender 3000x27

Vuillot

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Hjdpfx Aexwp Ehsbionr Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Hjderpnf Ajpfx Abionr Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Hnjdpet Akt Rofx Abisr Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Hjdjur N Dajpfx Abisnr Year of construction 1970 The machine is ready for immediate use!

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. Hsdoya Eh Eopfx Abijnr 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. - Auxiliary systems for air, vacuum, power, gas, and water supply.

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t Hodpfx Abjvwgl Neijnr stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Hsdjt Hwt Sopfx Abisnr Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER Hodpjxp Na Nsfx Abienr MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm Hnodpfx Absrwx U Ieijr FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Hnedpfxowl A H De Abior Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t