Punching & Nibbling Machines TRUMPF CS20a

Trumpf TLC 1005

2007

used

Call

Working hours laser on: 25038 h Working hours beam on: 3160 h Laser power: 5000 Watt Electrical connected load: 126 kVA Working range laser: 4000x1500x750 mm Standard configuration Cebea8tgdd control- Siemens 840 D Extended machine accessories - Welding and cuttingFocal length: f=270 / f=200- 7.5 inch cutting head- Weld detection- axis of rotation- Elect. door- Divisible side door- LED lights

Listing

Unterschleißheim

8125 km

TRUMPF TrumaBend V85

2001

used

Call

pressure 85 t chamfer lenght 2050 mm distance between columns 1750 mm Control Delem stroke 215 mm operating pressure 340 bar overtravel time 55 ms safety distance 88 mm voltage 3x400 V generator - rated current 25,5 A frequency 50 Hz compressed air 6 bar quantity of oil 200 l Dkf903uly column daylight 1750 mm throat 410 mm work table: 120 mm dayligth 385 mm rapid speed y-axis 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec material thickness max. 5 mm total power requirement 10,2 kW...

Listing

Niederlangen

7585 km

Plate Edge Welding Slanting Machine

TRUMPF TrumaBend V 50

2001

used

Call

pressure 50 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm Cmllmwuynl - controlled axes: Y1, Y2, X, R - Pneumatic die shift - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp - LAN network connection - 4 stop fin...

Listing

TRUMPF TrumaBend V320 Press Brake Year 2002 . TOP MACHINE!!

Tübingen

7960 km

TrumaBend V320

TRUMPF TrumaBend V320 Press Brake Year 2002 . TOP MACHINE!!

2002

good (used)

Call

Trumpf TrumaBend V320 Press brake with 2 bending aids 4m and 320 tons pressing force year of construction 2002 Operating hours 27.887h Sv9qj

Listing

7870 km

Punching machines

Trumpf Trumatic 160

1993

ready for operation (used)

Call

General Data Measurements width 5800 mm Measurements depth 4600 mm Measurements height 1960 mm Machine weight 4100 kg Control Unit Brand Bosch Model Trumagraph CC220 3xk70peklm Main Drive Punching force 150 kn Movement X-Axis Movement 2000 mm Y-Axis Movement 1000 mm Table Table load 100 kg This Trumpf Trumatic 160 Punching machine was built in the year 1993 and has 44155 hours. It is equipped with a Bosh Trumagraph CC220 control unit. The machine has a punching force of 150 kN. Application...

Listing

Leipzig

7966 km

TRUMPF TKF 1525-2

used

Call

x-travel: mm plate thickness: 40 mm work piece width: mm height over floor: mm max. helix angle: 20° / 30° / 37,5° / 45° ° Jaet9ke7i capacity in W: 2000 Watt voltage: 220 V machine weight approx.: 18 kg dimensions of machine: L: 780 x B: 360 x H: 360 mm EDGE CHAMFERING MILLING MACHINE

Listing

Strassberg

(dealership location)

7985 km

tube laser cutting machine

Trumpf TruLaser Tube 5000

2008

used

Call

Working hours laser on: 36373 h Working hours beam on: 10840 h Laser power: 2700 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 17700 kg max. wall thickness: 6,4 mm max. tube length: 6500 mm min. tube length (automatic): 3000 mm max. tube diameter: 150 mm min. tube diameter: 15 mm max. length finished parts: 6500 mm max. tube weight: 20 kg/m max. tube bundle weight: 4000 kg max. speed: 100/5/40/40 mm / min Small...

Listing

Unterschleißheim

8125 km

Stamping and Punching Machine

TRUMPF TC 5000R - 1300

2002

used

Call

sheet width 1250 mm plate length 2500 mm plate thickness 8 mm Control Sinumerik 840 D travel -x axis -50 - + 2550 mm travel -y axis -7 - + 1280 mm workpiece weight max. 200 kg 100 m/min 60 m/min 330 U/min 2800 1/min 1200 1/min tool changing time sec positioning accuracy +/-0,1 mm connected load 29 kVA weight of the machine ca. 13,2 t dimensions of the machine ca. 6,0x7,0x2,7 m Trumpf control (Siemens Sinumerik 840D), linear magazine with 18 tools, programmable parts flap, stable C-fr...

Listing

Hessisch Lichtenau

7826 km

Beveller, edges former, Kantenfasmaschi

TRUMPF TKF 103

used

€850

Call

Beveller, edges former, edges Broacher Trump Chamfering steel plates to the weld seam preparation Type TKF 103 Sheet thickness: 4-25 mm Helix length max: 10 mm Helix angle: 30° 2rcc7y Power: 2000 Watt Power supply: 220 volts, 50 Hz -equipped with guide bracket for 30° Helix angle - nachschleifbarer shock steel for high tool utilization -multiple shock steels -Base plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thickness To the arrival angles of straight and curved edges with a...

Listing

TRUMPF TC6000-1600 Big Format,Year 2005 included SheetMaster+GripMaster.

7870 km

laser punching machine

TRUMPF TC6000-1600 Big Format,Year 2005 included SheetMaster+GripMaster.

2005

good (used)

Call

BIG FORMAT With sheetmaster, GripMaster , lift table with scissors, loading/unloading and double trolley VIDEO AVAILABLE Elyi0kqyo

Listing

Hungary

8662 km

Laser cutting machines

Trumpf Trumatic L 3030

2002

ready for operation (used)

Call

Control Unit Brand Trumpf Main Drive Laser power 2,0 kW This Trumpf Trumatic L 3030 Laser cutting machine was manufactured in the year 2002 in Germany. It is equipped with a Trumpf control unit. The machine has a laser power of 2,0 kW. Cke9xuaycb Application Types Laser Cutting

Listing

8559 km

Punching machines

TRUMPF Tru Punch 5000, type S12

2018

used

Call

- TruPunch 5000-1600 (S12) - big version - Motohours 14 502 mth (to date 28.02.2023) - still working in production, working untill the end of April, but is possible to buy it before and available from dismantling and loading will be in 05/2023 - Machine working area X x Y: 3050 x 1550 mm - Sheet thickness 8 mm - Max. punching force 220 kN - Programmable holding force 4.5-20 kN - Max workpiece weight 280 kg - Max. overflow height for workpieces 35 mm - Max. speed axis X 100 m/min, axis Y 60 m/min...

Listing

Strassberg

(dealership location)

7985 km

Stamping and Punching Machine

Trumpf TruLaser 3040

2007

used

Call

Working hours laser on: 50921 h Working hours beam on: 21717 h Cath0smuiw Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- ...

Listing

Unterschleißheim

8125 km

TRUMPF TC 600L - 1600

1997

used

Call

plate thickness 8 mm laser capacity in Watt 2600 W working area 2585x1650 mm passage 35 mm workpiece weight 230 kg Part width max. 500 0 X axis speed 90 m/min Y axis speed 60 m/min sheet width mm C-axis 1 U/min plate length mm positioning accuracy +/- 0,1 mm Control Sinumerik 840D Punching capacity 220 kN punch diameter 76 Bnd37i2m number of tools 18 total power requirement 73 kW weight of the machine ca. 23 t dimensions of the machine ca. 8,0x8,0x2,6 m Quickload, repositioning cylinder...

Listing

Günzburg

8038 km

gebr. punching and nibbling machine

TRUMPF TRUMATIC 600 L

2000

good (used)

Call

Punching force 220 kN sheet thickness 8 mm travel - x 2500 mm travel - y 1250 mm Hnuxfh2dx workpiece weight max. 200 kg Machine weight approx. 16000 kg

Listing

Trumpf Laser Punch TC 6000-1300 Year 2001

7870 km

Trumpf Laser Punch TC 6000-1300

Trumpf Laser Punch TC 6000-1300 Year 2001

2001

ready for operation (used)

Call

Trumpf TC 6000-1300 Year 2001 Cfalley9ai 3,2 KW Resonator Laser on: 79000 Hours Beam on: 26000 Hours

Listing

Rosenheim

8187 km

CO2 laser plant

TRUMPF TruLaser 3030 I TruFlow 5000 Watt I L20

2011

excellent (used)

Call

PLANT WILL BE AVAILABLE FROM SEPTEMBER 2023! - Filter for dust extraction has been renewed in February 2023 - Hoses for coolant circle has been exchanged for 3 year ago - Next maintenance is scheduled in May 2023 Brand: Trumpf Type: TruLaser 3030 Year of construction: 2011 Laser: TruFlow 5000 (5 kW cutting power) Controller: Trumpf based on Siemens 840D SL Counting hours machine ON: ca. 40.257 h Beam ON: ca. 17.157 h Working area: X- axis 3.000 mm Y- axis 1.500 mm Z- axis 115 mm Sheet thickn...

Listing

Babberich

7577 km

CNC Pressbrake 2050 x 85 Ton

TRUMPF Trumabend V85

2002

good (used)

Call

Make: TRUMPF Type: TrumaBend V85 Control: DA 65 Delem Year: 2002 CNC-Bombierung 2 schnellverstellbare Auflagekonsolen vorne Hydraulische Oberwerkzeugaufnahme "Modufix" Unterwerkzeugaufnahme für Einzel-V-Matrizen mit hydr.Klemmung Maschinenseitige Vorbereitung für Winkelsensorik ACB 2 Zusätzlicher klappbarer Anschlagfinger Sicherheitseinrichtung BendGuard Oberwerkzeugaufnahmesystem "Modufix", manuell Unterwerkzeugaufnahme für EV-Matrizen, Klemmung manuell, Verschiebung programmierbar Sicherh...

Listing

Latvia

8175 km

Bending machines

Trumpf TrumaBend C60

2003

ready for operation (used)

Call

General Data Machine weight 4900 kg Control Unit Ci07tla7nf Brand Trumpf Main Drive Pressing force 600 kN This Trumpf TrumaBend C60 Bending machine was manufactured in the year 2003 in Austria and has 37783 production hours. It is equipped with a Trumpf control unit. The machine has a pressing force of 600 kN. Application Types Bending

Listing

Altbach

7967 km

TC 3000-1300 FMC with Sheetmaster

TRUMPF TrumaBend V85

2004

used

Call

pressure 85 t chamfer lenght 2050 mm distance between columns 1750 mm Z1+Z2 axes controlled by cnc 0-1700 mm X-axes 600 mm Stroke beam 365 mm 620 mm 350 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec Dimensions of machine: 3,6x2,0x3,0 m +/- 50 mm Number of working hours 29830 h total power requirement 10 kW weight of the machine ca. 10 t Cwz0xgxl2y dimensions of the machine ca. 3,6x2,0x3,0 m

Listing

Wiefelstede

7607 km

sword saw

Trumpf TPC 150-2

used

Call

Sword Saw, Panel Cutter, Panel Cutter, Sandwich Panel Saw, Panel Saw -Manufacturer: Trumpf, sword saw type TPC 150-2 with tool case Fzcnqto -Cutting depth: 80 - 150 mm -Drive: 1.4 kW -Dimensions case: 540/300/H345 mm -Weight: 14 kg

Listing

TRUMPF TruMatic PUNCH 3000-1300 included SheetMaster . Year 2005

7870 km

TRUMPF TruMatic PUNCH 3000-1300 included SheetMaster . Year 2005

2005

good (used)

Call

Listing

Ahaus

7617 km

TRUMPF TRUMABEND 125/3

1992

used

Call

pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 300 mm stroke 200 mm table width 180 mm ajustment speed 130 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec back stop - adjustable 995 mm dayligth 400 mm work height max. 905 mm Number of working hours ca. 52.000 h oil volume 200 ltr. Pressure power 280 bar total power requirement 15,0 kW weight 9800 kg range L-W-H 3.255 x 2.300 x 2.650 mm ** from a maintenance workshop ** very neat condition (!!) Furni...

Listing

Torres de la Alameda

7628 km

TRUMPF L 3030

good (used)

Call

Listing

Siemens Trumpf AG G34901-F1002-H2-B2 / 134592 Bitbusmodul

Remscheid

(dealership location)

7683 km

Siemens Trump component

Siemens Trumpf AG G34901-F1002-H2-B2 / 134592 Bitbusmodul

ready for operation (used)

€957

Call

Siemens Trumpf AG G34901-F1002-H2-B2 / 134592 Bitbus module, E status and serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Di8pgz

Listing

Huttwil

7978 km

Pipe laser

TRUMPF Tubematic

2002

ready for operation (used)

€10,000

Call

Tubematic pipe laser with bundle trough 6 meters loading and 4.5 meters unloading fully automatic 2.7 KW laser power. Machine is ex place and must be dismantled and transported away by the buyer. Madkngayj

Listing

Michelfeld

7960 km

TRUMPF TRUMATIC L 4030 - 4 kW

2006

good (used)

€42,500

FCA Fixed price plus VAT

Call

TRUMPF TRUMATIC L 4030 - 4 kW Laser cutting machine year of construction: 2006 Control: SIEMENS 840 D machine number: A0240A0345 working area: 4.000 mm x 2.000 mm x 115 mm Laser power: 4.000 Watt Laser beam on approx. 20.800 hours Equipment: 5″ and 7.5″ working heads L9lasjhie shuttle table/pallet Chip conveyor Operating manual/documentation Machine parameters on storage medium HF driver stage and the frequency converter as well as the PCU50 were replaced in 2022. All other accessories visib...

Listing

Österreich

8353 km

Laser cutting machines

Trumpf TruMark 5000

2006

ready for operation (used)

Call

General Data Measurements width 1630 mm Measurements depth 1000 mm Measurements height 1790 mm Machine weight 420 kg Main Drive Spindle speed range 14 Laser power 2 kW Workpiece Workpiece weight 10 kg Di8gjz Media Main electronic connection 230 V / 50-60 Hz This Trumpf TruMark 5000 Laser cutting machine was manufactured in the year 2006 and has 48000 production hours. The machine has a workpiece weight of 10 kg. Application Types Laser Cutting

Listing

Strassberg

(dealership location)

7985 km

Trumpf 0377003 - Filtergehäuse (filter)

used

Call

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

Punching Press

Trumpf TRUMATIC 500 R

2000

good (used)

Call

Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Software: BOSCH Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Csgc89poyb Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface Rotary head

Listing

Wiefelstede

(dealership location)

7608 km

3.25 mm nibbling machine

Trumpf N325

used

€350

Call

Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 900 watts -Max. Cutting capacity: 3.25 mm -Dimensions: 500/220/H230 mm Qlhzdnf80 -Weight: 5 kg

Listing

Olching

8116 km

Trumpf TruLaser Cell 3010 (L33)

2012

used

Call

Manufacturer: Trumpf Model: TruLaser Cell 3010 (L33) Year of manuf.: 2012 Control: Siemens Sinumerik 840 D _____ Description: technical dataSpace requirement:L3700xW2800xH2400 Mains:380-460V /50/60 Hz Cupt2i9l2a Connected load:2 Kw Required fuse protection:3x16 A Traversing speed:up to 50m/min Machining:2D and 3D applications possible Oscillating axis of optical system B:+ -120º TX / Y position tolerance:0.015 mm. Maintenance:Carried out regularly LaserModel:TruFiber 400 (G2) Beam quality:< 1....

Listing

Lingen (Ems)

7608 km

TRUMPF TruLaser 5040 – 5 kW

2007

good (used)

€49,900

FCA Fixed price plus VAT

Call

TRUMPF TruLaser 5040 - 5 kW Laser cutting machine year of construction: 2007 Control: SIEMENS SINUMERIK 840 D Machine number: A0250A0422 working area: 4.000 mm x 2.000 mm x 115 mm Laser power: 5.000 Watt Max. Sheet thickness mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 15 mm Laser beam on approx. 29,000 hours, as of October 2022 Equipment: Closed machine frame with integrated laser unit. TRUMPF laser TLF 5000 Laser unit: CO2 laser, high-frequency ex...

Listing

7870 km

Laser cutting machines

Trumpf HL 124 P

2006

ready for operation (used)

Call

Control Unit Dyqky0fz9 Brand Trumpf Main Drive Laser power 5 kW This Trumpf HL 124 P Laser Cutting machine was manufactured in the year 2006 in Germany. It is equipped with a Trumpf control unit. The machine has a laser power of 5 kW. Application Types Laser Cutting

Listing

Strassberg

(dealership location)

7985 km

Trumpf 1819673 - Pumpe CM 10-3

used

Call

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

CO2 laser

TRUMPF TruLaser 5030 L16

2011

good (used)

Call

Catalog No. : 6538 Type: TruLaser 5030 L16 Producer: TRUMPF Made in: 2011 Characteristic: Control system: SIEMENS SINUMERIK 840 D Laser ON: 86859 Beam ON: 65711 Laser power: 5 kW Se87d Length of the working table: 3000 mm Width of the working table: 1500 mm Maximum thickness of the cut sheet metal: 25 mm Maximum thickness of the cut sheet metal (Stainless Steel): 20 mm Maximum thickness of the cut sheet metal (Aluminum): 12 mm Travel length X-axis: 3100 mm Travel length Y-axis: 1500 m...

Listing

Wiefelstede

(dealership location)

7608 km

3.25 mm nibbling machine

Trumpf N325

used

€350

Trump Trulaser L20 3,2kw used in 2011

Call

Nibbling machine, nibbler, nibbler, tin snips, circular shears Hih0nh2dc -Power: 900 watts -Max. Cutting capacity: 3.25 mm -Dimensions: 500/220/H230 mm -Weight: 5.5 kg

Listing

Budapest

8611 km

Trumpf TruLaser 3030

2011

good (used)

€45,500

ONO plus VAT

Call

immediately available!! Trumpf Trulaser 3030 3, 2KW 2011. Elérhető azonnal. Working hours laser on: 71927 h Working hours beam on: 39006 h Laser power: 3200 Watt Working range laser: 3000 x 1500 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm B78q2jcymf Length: 9350 mm Width: 4600 mm Height: 2200 mm Machine weight: 12000 kg

Listing

Olching

8116 km

CNC laser cutting machine

Trumpf TrueLaserCell 3000

2014

used

Call

Manufacturer: Trumpf Model: TrueLaserCell 3000 Year of manuf.: 2014 Control: _____ Cxr9uygk7i Description: technical dataDimensions:3300x1600x2200 Year of manufacture:2014 Laser:TruFiber 400 Workpiece holder:Rotary tables with zero point clamping system Software:TruControl 1000

Listing

Hamburg

7690 km

TRUMPF Trumatic 3030

2005

ready for operation (used)

€12,500

Call

Immediately available from site : CNC laser cutting machine Trumpf Type 3030 Year of manufacture 2005 3xe90zsklu Siemens Sinumerik 840 D working area 3000 x 1500 x 115 mm 4000 watt Mild steel 20 mm Stainless steel 12 mm Aluminum 10 mm Weight 12 to At the price of Euro 12.500.-plus VAT from site

Listing

Trumpf 1934478 - Durchflusssensor (flow meter)

Strassberg

(dealership location)

7985 km

CNC pressbrake 2720 x 85 Ton

Trumpf 1934478 - Durchflusssensor (flow meter)

used

Call

Listing

Babberich

7577 km

TRUMPF Truebend 5085

2007

good (used)

Call

Make: TRUMPF Type: Truebend 5085 Control: TASC 6000 Year: 2007 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking Backgauge 4-axes system Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Specifications Metric US Standard Max. bending length 2720 mm Distance between column 2260 mm Dis. Beam - Table 735 mm Beam stroke 445 mm Table Width 120 mm Troth beam 420 mm Approch s...

Listing

Wiefelstede

(dealership location)

7608 km

Beveller

Trumpf TKFB100

used

€280

Call

Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² Libqf -220 V 1800 W -470 strokes/min -Weight: 15 kg

Listing

Weilheim an der Teck

7984 km

TRUMPF TCL 4050

2003

good (used)

Call

Laser cutting machine Manufacturer: TRUMPF Type: TCL 4050 Year of manufacture: 2003 3ojkhr7lvw Machine number: A0250A0048 Operating voltage: 400 V frequency: 50 Hz Rated current: 151 A Connection: 105 kVA Travels: X: 4000 mm Y: 2000 mm Z: 115 mm Max. plate thickness for mild steel: 25 mm Max. Workpiece weight: 1800 kg Max. Axis speed: Axis parallel: 200 m/min Simultaneous: approx. 300 m/min Max. Axis acceleration: 16 m/s² Accuracy: Smallest programmable displacement: 0.001 mm Position deviation:...

Listing

Olching

8116 km

Trumpf TruDisk 2000 (FD24)

2014

used

Call

Manufacturer: Trumpf Model: TruDisk 2000 (FD24) Year of manuf.: 2014 Control: _____ Description: Technical specificationsType:TruDisk 2000 (FD24) Laser power:2KW Year of manufacture:2014 LLK:incl. 20m Processing optics:1x new, 1x used Laser nozzles:Remaining stock available Computer card:available Keller L-CUT ExtractioType:L- Cut 4 P5 Power:7,5 Kw Cvu80uty3w Voltage:400V Nominal pressure:6bar Dimension:1600x1600x2900

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

Liftmaster

TRUMPF Liftmaster L3030

2002

good (used)

Call

Catalog No. : 6118 Type: Liftmaster L3030 Producer: TRUMPF Made in: 2002 Cdjxcqwykb Characteristic: In a good technical condition.

Listing

Strassberg

(dealership location)

7985 km