Sheet metal deburring machine

Timesavers Serie 10

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation Ppodpstr U Hlsfx Af Tjp → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- Ppedpettah Rjfx Af Tep For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg Ppsdpfx Afjt D D Nzo Tsp

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Ppsdexq Elwspfx Af Tsp

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Podpfx Afjg D Rfmo Tspp

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Pjdpfxowih Dco Af Tepp Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Ppsdpfewihxasx Af Top Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW 2 to 10-Ton Capacity Available Upon Request

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 23 03 28 / 1, functionality: fully functional, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min Ppedpfst Hvkvsx Af Tep - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: used, Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate -Clamping plate: straightening plate with base frame -Length: 450mm -Width: 450mm -Table thickness: 29 mm -Total dimensions: 855/450/H1135 mm Pjdpfxoprb Drs Af Tjpp -Weight: 59 kg