Sheet metal clamp 0-50 mm

Tigrip TBS-4,5

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Liaul -Span width: 0 to 50 mm -Load capacity: 5000 kg -Weight: 31 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 3 to 24 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece Sq9X9S -Weight: 14 kg/piece

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available Qlkmifhtr -Price: per piece -Weight: 14 kg/piece

Condition: like new (used), Functionality: fully functional, machine/vehicle number: 190572, total length: 2,000 mm, total height: 1,650 mm, total width: 550 mm, type of input current: three-phase, product height (max.): 250 mm, product height (min.): 50 mm, product width (max.): 200 mm, input voltage: 400 V, power: 10 kW (13.60 HP), feed rate X-axis: 300 m/min, temperature: 175 °C, This is an unused shrink tunnel system with the associated belt. Bvndsaptdo This was purchased a few years ago but never used. Please feel free to contact us for more information.

Condition: ready for operation (used), Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible. Dqpjcj

Year of construction: 2022, Condition: good (used), machine/vehicle number: 55016145273, Offer 24229 Technical data : H0H9Ybo3B - Load capacity 1 t - Crane lifting eye - opening H 110 x W 60 mm - 2 adjustable lifting eyes 700 to 1500 mm - adjustable distance 100 mm - Cross beam cross-section W 100 x H 100 mm - Cross beam dimensions approx. L 1540 x W 100 x H 460 mm - Weight approx. 40 kg

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Openwork Stackable approx. 260 pieces available for further questions please contact me Ox9E9

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Nmdjh -Span width: 0 to 100 mm -Load capacity: 1250 kg -Number: 4x sheet metal clamps available -Price: per piece -Dimensions: 300/310/H80 mm -Weight: 13 kg

Year of construction: 2014, Condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Bwesr722Ol Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Year of construction: 1985, Condition: good (used), -KOM 421 Offered here is a Bunion brace of company Tigrip type TR 0.75 / 1050. 9Srddjfnj The Bale clamp works mechanically and is therefore in perfect condition! Gripping area: 700 – 1050 Capacity: 0.75 t All other information, please refer to the pictures. Pick up is shipping for free-please enquire. You get a proper invoice with expelled VAT when purchasing Interest or questions, please register by E-Mail!

Condition: ready for operation (used), Year of construction: 2016, A TBS Pack film shrinking machine is available. 1) TBS Pack semi-automatic angle welding machine, year of manufacture: 2016, film type: POF/PP/PE/PVC, max. film thickness: 50my, max. workpiece dimensions X/Y/Z: 480mm/680mm/200mm, max. roll length/diameter: 600mm/250mm, max. connected load: 1.8kW, welding capacity: 15/min, welding frame dimensions X/Y: 500mm/700mm, weight: approx. 230kg. Documentation available. 2) TBS Pack shrink tunnel ST-5530, year of construction: 2016, tunnel dimensions X/Y/Z: 550mm/1200mm/300mm, max. conveying speed: 30m/min, max. connected load: 9.5kW, weight: approx. 440kg. Documentation available. Byl8Xxgvj3

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 32 mm -Load capacity: 2000 kg -Number: 1x terminals available 89Ao9Muzm -Price: per piece -Weight: 10 kg/piece

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Gripping width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x gripper available 37Zjdprn -Price per piece -Dimension: 700/220/H500 mm -Own weight: 25 kg/pc.

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws 89Alm8Rja -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece -Weight: 24 kg/piece

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Bprgzdjq -Sheet metal claws -Span width: 0 to 32 mm -Load capacity: 3000 kg -Number: 1x terminals available -Price: per piece -Weight: 14 kg/piece

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: SME130-0108, roller (top) diameter: 130 mm, overall weight: 1,360 kg, total length: 2,320 mm, total height: 1,200 mm, total width: 850 mm, bending length: 1,550 mm, power: 2.2 kW (2.99 HP), Equipment: documentation/manual, emergency stop, The following special equipment is included in the price: - hardened rollers (suitable for stainless steel bends) - Motorized rear roller adjustment - Digital display Max. working length (sheet width) 1550 mm Max. sheet thickness 4.5 mm (material in St-37 quality; yield strength 240 N/mm2) Max. sheet thickness 4.0 mm when bending (material in St-37 quality; yield strength 240 N/mm2) Upper roller diameter 130 mm Min. bending diameter 195 mm Motor power 2.2 kW Machine dimensions (L/W/H): 2320 mm / 850 mm / 1200 mm Machine weight: 1,360 kg Bending speed: 5.3 m/min Bklbc8Unjs Upper and lower rollers electrically driven Cast iron housing Upper roller can be swiveled for easier removal of the Materials Conical bending device Asymmetrical roller arrangement Main rotor self-braking Separate, portable control and operating panel with digital display and foot pedals for control Safety line CE marking

Condition: new, Rollmak 3-roll round bending machine SME 130-15/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 1550 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 1550 mm roll diameter 130 mm smallest bending diameter 195 mm weight 1210 kg dimension L-W-H 2650 x 900 x 1200 mm C00Otj3Okl Motor:2,2 KW Equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Rollmak 3-roll round bending machine SME 140-20/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 2050 mm C00Pgcwqyk sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1550 kg dimension L-W-H 3150 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Bernardo swivel bending machine with segmented upper and lower beam of TBS 1020 Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width 54 mm Bending angle 0-135 ° 1350 mm wide Depth * 1115 mm Height 1170 mm Weight approx. 310 kg * with Backgauge Properties Segmented top and bending flange for various bending possibilities Clamping by means of foot pedal, hands remain free for optimum positioning of the plate Universal bending machine for sheet metal working and repairers Robust construction in modern design Manual bending machine for standard bending tasks Optimal price-performance ratio Faster and easier bending operation via handle Easy setting of the lower beam on the corresponding thickness Behws7Ppwp High upper beam for the manufacture of highly bent profiles Scope of delivery Segmented clamping beam Segmented lower beam Backgauge Bending segments 25 | 30. 35. 40. 45. 50. 75. 100. 150. 200. 270 mm

Condition: excellent (used), Gear milling cutter, modular milling cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 2 pieces -Type: Mod.4,5 R1 EW 20° see photos -Hole: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 170/90/H90 mm -Total weight: 3.4 kg Drdq2L

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics Wq8Hwtys3 High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: used, mileage: 90,000 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2011, next inspection (TÜV): 03/2025, loading space length: 4,500 mm, loading space width: 2,426 mm, loading space height: 2,100 mm, emission class: euro5, color: white, number of seats: 3, total width: 2,550 mm, total height: 3,250 mm, Equipment: ABS, soot filter, Leaf-air suspension, outside temperature display, differential lock, disc brake, air seat, heated outside mirrors, electric outside mirrors, tachograph, underrun protection, twin tires, compressed air brake system, used vehicle B0Slttj7R0 Vehicle no. 3094, differential lock rear, ABS, S-cab, 6-speed manual transmission, multifunction steering wheel, reversing camera, leaf springs front, air suspension rear, wheelbase: 3,320 mm, plastic diesel tank 125 L, AdBlue tank 25 L, MSS system, EURO 5, 3-seater, pre-installation for trailer coupling with air and electrical connections, tires: 235/75 R17.5, drinks wall structure, rear doors, wooden loading floor, loading space dimensions LxWxH: 4,500 x 2,426 x 2,100 mm, empty weight: 5,270 kg, : 7,490 kg, ORIGINAL KM!!!!! Errors and prior sale reserved

Condition: new, Bernardo swivel bending machine with segmented upper and lower beam of TBS 1270 Working length 1270 Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width 46 mm Bending angle 0-135 ° Width 1600 mm Depth * 1115 mm Height 1150 mm Weight 360 kg * with Backgauge Properties Segmented top and bending flange for various bending possibilities Clamping by means of foot pedal, hands remain free for optimum positioning of the plate Universal bending machine for sheet metal working and repairers Robust construction in modern design Manual bending machine for standard bending tasks Optimal price-performance ratio Faster and easier bending operation via handle Easy setting of the lower beam on the corresponding thickness High upper beam for the manufacture of highly bent profiles Scope of delivery Segmented clamping beam Segmented lower beam Bl99L90U Backgauge Bending segments 25 | 30. 35. 40. 45. 50. 75. 100. 150. 200. 250. 270 mm

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 3 pieces -Type: Mod.4,5 R1 see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 320/120/H120 mm Bw70Tdj3Os -Total weight: 13 kg

Condition: used, saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Manufacturer: Arntz, saw blade Ø 520 x 4.5 mm -Inside: Ø: 80 mm -Bolt circle: Ø 123 x 23 mm -Number of teeth: see photo Drcafr -Weight: 6 kg