Log band sawmill (mobile)

SERRA ME110

Condition: as good as new (ex-display), Hauslhof CTR800Hydraulik block bandsaw, demonstration machine, log diameter up to 830 mm, overall length 5800 mm, width 2300 mm, equipped with a hydraulic system for clamping, securing, rotating and lifting the log. Total engine output at 100% duty cycle: 10 kW. Options: CTR800H-Ver3, CTR800H-KSD, CTR800H-STH, CTR800H-STH-V, CTR-SSP, CTR-11, CTR-VOR, CTR-AMP, CTR-EGL, CTR-LG Automat, CTR-Pumpe-EA. Gisdpfx Ajvrvrneg Sol

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle Gsdpfx Aov Hwk Usg Ssil !! Sold on behalf of the customer!!

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. Gsdpfxsvuhumj Ag Soil The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Gijdpswmw Nvjfx Ag Sjl Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: as good as new (ex-display), Year of construction: 2024, cutting length (max.): 12,000 mm, cutting width (max.): 1,000 mm, Small horizontal saw bench WRAVOR WRC 1000, the smallest in the range, fixed: 1000mm diameter solid wheels for a cutting diameter of 1M, sawing length adaptable according to the possible extensions of the chassis: currently 8M (12M chassis) Hydraulic equipment (claws/rollers, centerers, log turners) and mechanical • 4 hydraulic loading arms attached to the chassis • 3 pairs of claws / space for 3 others possible as an option • hydraulic lifting of the log on clamps, with 2 mechanical rollers and 1 driven roller, with the possibility of adjusting the height • Hydraulic centerers (up/down movement): 4 • Mechanical supports: 3 • Hydraulic lifting rollers: 3 • 90° angle centerers up/down movement: 3 • Standard hydraulic turners: 2 Gsdpfx Aevr Ez Eog Sjil • 40l hydraulic generator tank and 16l for the 4Kw pump • Overhead electric cable fixed on rail and rollers • Mechanical table for outputting wood (2.5M, possible in hydraulic, tilting, 4M, connected to the control station as an option) Control station currently separate from the saw bench, Basic control system, Wravor program, Joysticks and head sawdust suction system as options Hydraulic adjustment of the blade tension / Electric scoring saw / Hydraulic hand for pushing sawn wood / Right/Left blade guides: centralization of blade lubrication / Head movement (worm screw)... PV 45 blade, length 6390, width 110mm

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm Gijdpsu Agh Sjfx Ag Ssl 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, cutting length (max.): 6,000 mm, cutting width (max.): 1,050 mm, Versatile HORIZONTAL SAWMILL, DOUBLE CUT / in WRC 1050 "VENEER" version AUTOMATIC CUTTING and specific of THIN VENEER SLATS • Frame length: 11M for 6.5M log length, possible extensions • DOUBLE CUT SAW HEAD with adjustable mobile pressure guides to hold the blade during cutting. • STATION & CONTROL SYSTEM SEPARATE from the saw bench TO BE POSITIONED ACCORDING TO THE PLAN TO BE DEFINED – on the existing site, open station with or without seat integrating the control system • 45KW MAIN MOTOR WITH FREQUENCY INVERTER option • WORM SCREW provided in each of the side pillars / or 2 worm screws / with or without FREQUENCY INVERTER for faster up and down movement and more precise • MORE POWERFUL HYDRAULIC GENERATOR ON THE CHASSIS: 18KW + 200L TANK + FREQUENCY INVERTER - so that the hydraulic equipment on the chassis moves faster • FastSmartCut CONTROL SYSTEM, SCHNEIDER 4.0 base, / WRAVOR PROGRAM / 2 joysticks + touch screen is encrypted instead of the initial standard PLC 1040 system • Automatic HANDS sawn timber thrust - including the GUILLOTINE option which is priced: vertical arm for DIFFICULT timber, for more SPEED • 1 CAMERA - 1 screen, additional cameras possible as an option • HYDROFOR COOLING SYSTEM • LUBRICATION SYSTEM - in ELECTRIC version or mechanical pump • 5 pairs of hydraulic SPINDLES, including the option with hydraulic cylinder • 5 hydraulic ROLLERS up/down movement Gisdpfsvtqtvex Ag Sjl • 3 NEW CENTERING DEVICES (not at 90° angle) new generation • 3 NEW LOG TURNERS, new generation, V system (cradle) • ELECTRICAL wiring: flat cables, cased in a chute • SILON BELT output belt, 4M, automatic up/down movement controlled from the control system • Sawdust EVACUATION system by ZIPPER: by capture (vacuum cleaner on the frame) as close as possible to the cutting blade and possible connection with the existing EBT suction circuit: completes the VENEER system, more powerful than the standard • The CABLE SAW head traction system, SEW Asynchronous system for greater speed and precision: optional Differences between the standard horizontal saw bench and the specific saw bench for veneer: the saw has the following adapted equipment: - a reinforced fairing at the head to prevent any intrusion of sawdust between the flywheel and the blade. - additional protective shields due to more powerful and voluminous sawdust extraction - double-cut blade - graphite blade guides (bakelite for the standard model) - special system for changing graphic blade guides - special protection of the chassis and sensors, plexi in the cover (different design of the saw head cover compared to the standard band saw) - additional sensors for blade deviation - pneumatic jet cleaning for the entire length of the saw bench OPTIONAL add-ons on request

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Gisdpsvrvqwefx Ag Sel Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Giedpovcqanofx Ag Sel Terms of delivery: ex location

Condition: good (used), Four-sided planer WEINIG type U17N 8 spindles Working width up to 170 mm Working height up to 120 mm Gisdeupkc Espfx Ag Sjl feed infinitely variable 6-36 m/min