Panel saw

SCM GABBIANI Galaxy 2

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding Kjdpfsxqggcex Aaxewt SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Ksdpfxowwryws Aaxjwt

Condition: good (used), I am selling a SANDYA CL110 belt sander machine Kwsdpovx Tnmsfx Aaxot

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition Kodpfx Aajuc Idxsxswt electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, functionality: fully functional, type of cooling: air, Equipment: CE marking, documentation/manual, type plate available, Operating hours total: 494 h Load hours: 237 h Maintenance freshly performed -The variable speed screw compressor NOBEL with 'DNair2' microprocessor control is already factory-prepared for the SMS module (optionally available under: 9062744) -The controller communicates in plain text; all important operating states can be read directly. -The controller has an RS 485 interface Features: Thermal control valve compressor block POWERSYSTEM separate radial fan, temperature controlled for optimal cooling Very good accessibility for all maintenance work Rotation direction monitoring using phase sequence relay without dryer, standard with galvanized cyclone separator tank Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Motor kW/HP: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 Kg The machine can be demonstrated on site under power if desired. All information without guarantee Errors and prior sale excepted Kwjdpsqd Uvujfx Aaxst Sale EXW free loading from warehouse Hessisch Lichtenau. Sale exclusively to commercial buyers, excluding any liability for material defects. Liability for damages resulting from injuries to health, body, or life and grossly negligent and/or intentional breaches of my duties as a seller remains unaffected. This offer is exclusively aimed at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.

Condition: excellent (used), Year of construction: 2011, Panel saw with cutting length 4500mm Pusher depth 5580mm Lift table width 2200mm Number 7 clamps Feed speed 170m/min Blade 450mm Blade projection 125mm Kjdpjwq Iqxofx Aaxowt

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Kedpfox A Tk Eex Aaxswt Main saw blade projection: 75 mm No of Grippers: 9