RAS 74.30

RAS 74.30

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Ibsdox Av Uaopfx Af Sef

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Ibjdpfoxn Dhlsx Af Sef Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: used, Max. bending length: 3200 mm Ijdpfjgti Ehjx Af Ssbf Max. sheet thickness: 4 mm steel Motor-controlled back stop with folding cams up to 1500 mm Motorized bending beam adjustment Control Multibend 9000 Segmented upper beam tool with automatic tool clamping (height 150 mm) operation manual Weight: 5800 kg Max. bending length: 3200 mm Max. sheet thickness: 4mm steel mass: approx. 5800 kg Max sheet thickness: 4mm steel Max. Bending length: 3200 mm Max. Sheet thickness: 4 mm steel

Condition: refurbished (used), functionality: fully functional, control type: CNC control, controller model: MB2000, working width: 3,200 mm, type of crowning: fixed, sheet thickness steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,500 mm, Equipment: documentation/manual, emergency stop, RAS 74.30 Multibend 2000 Technical Data: Back gauge: CNC 1500 mm Max. sheet thickness: 4 mm Working width: 3200 mm Equipment: pointed rail and bending rail Motorized adjustment of the bending beam, Safety stop (finger guard), emergency stop cable Isdpsxhd H Isfx Af Ssbf Various tools available as options Gooseneck segments available on request

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Iedpsn Tnzfjfx Af Sobf Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: ready for operation (used), functionality: fully functional, working width: 3,200 mm, bending angle (max.): 180 °, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, opening width: 400 mm, TECHNICAL DETAILS Working area Sheet width: 3,200 mm Sheet thickness: 4 mm Ibodpfx Asw Dcx Dsf Sof Upper beam opening width: 400 mm Bending angle: 0 – 180° MACHINE DETAILS Total power requirement: 7.5 kW Dimensions & Weight Space requirement approx.: 5,000 x 2,200 x 2,560 mm Machine weight approx.: 5,500 kg EQUIPMENT RAS MonoBend control Foot switch

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, RAS 74.30 upper beam tool (see picture) The upper beam tool was on a RAS 74.30 built in 1997 and was apparently only used rarely, the pictures speak for themselves. The upper beam tool is available for the entire length of the upper beam including the corner tool (see picture). Ibjdpjvx Hxrofx Af Ssf Viewing is welcome. Purchase without return or guarantee.

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Iedpjtia Hhjfx Af Sobf

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet Ibedsvgnm Hjpfx Af Sef thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - General technical data (in mm): Bending length: 3,200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tonnes Backgauge system (U gauge): 10–4,050 mm Machine dimensions (U gauge): 4,620 x 5,480 mm Base machine weight: 11 tonnes Backgauge + U-form weight: approx. 1,205 kg - Machine-specific data: Motor drive; 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person front operation Isdpfxjx Hf E Ej Af Ssbf Second foot switch for rear operation (incl. safety light barrier for rear operation) 15" CNC colour graphic touchscreen control system CNC back gauge and upper holding system (10–1,550) Backgauge system (U gauge): 10–4,050 mm Photos are sample images