Rotary transfer table

Rückle PKT 6

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Hodpfx Aasu R R Acjrsn Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, FEMCO BMC 110 T2 Boring Mill (T-Type Design) – Available for Quick Delivery The FEMCO BMC 110 T2 is a classic boring mill designed for heavy-duty and high-precision machining. Hsdpfx Aexc Hphsaron Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing / financing available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Technical Specifications: Control System: HEIDENHAIN TNC 7 control system HEIDENHAIN 19" TFT display HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Internal coolant supply (IKZ) 20 bar Tool Changer: 60-position chain magazine with double gripper Chip Disposal: Dual hinged belt conveyor (front and rear) Enclosure: Fully enclosed perimeter guarding Spindle Support Bearing: Spindle support bearing ø 250 mm Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.010 mm Your benefits with JMT: ✔ Official FEMCO distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are pleased to advise you and provide a tailored quotation

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Hsdpfx Aasx Rhlcsrjn Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 5,824 mm, travel distance Y-axis: 897 mm, travel distance Z-axis: 1,005 mm, rapid traverse X-axis: 6,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, Equipment: documentation/manual, SHW UFZ 4 Travel distances • X-axis (bed): 5,824 mm • Y-axis (horizontal spindle stock): 897 mm • Z-axis (vertical): 1,005 mm Control • CNC control: Heidenhain iTNC 530 Clamping plate • Clamping surface: 5,000 x 2,000 mm Cross-traversing rotary table • Diameter: 1,400 mm (flattened) • Cross-axis travel: 1,131 mm Rapid traverse • X-axis: 6,000 mm/min • Y- and Z-axis: 8,000 mm/min Horizontal and vertical milling head • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm • Internal coolant supply • Spindle orientation with cycle 13 • Tapping without compensating chuck • The milling head was recently completely overhauled Automatic tool changer • Tool magazine for 45 tools Coolant system • Belt filter Chip conveyor Splash and chip guard General overhaul including control upgrade in 2008 About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core business is in the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls as well as control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization Hsdpfx Aaex Uw Egsrjn ----- Used machine – used milling machine – used travelling column milling machine – metal machining – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring milling machine – used metal milling machine – used metal mill – used cnc mill – cnc milling machines – milling machine – large part machining – cnc large part machining – milling – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, Base machine / travel paths X = 4,000 mm, Y = 1,600 mm, Z = 1,600 mm. The machine can be installed on the shop floor. The machine features a stable flat bed for fast and precise movement of the machine table in the X direction. Hardened, rolled compact guide rails, 1,200 mm guide rail width, and a rack and pinion drive with two electronically pre-tensioned servo motors ensure accuracy and dynamics. The machine table is designed as a steel welded construction with rolled compact guide rails. Liquid-cooled feed drives, two measuring systems, and telescopic steel guards ensure precision, constant temperature, and protection against chips and coolant. The spindle headstock slide and spindle headstock are made of GGG 60 and are stably guided via long guide rails. The twin-spindle drive is via two vertical ball screws with separate drives, measuring systems and CNC axes. Feed rate / rapid traverse: 2–30,000 mm/min, acceleration: 3.5 m/s². Direct, non-contact linear measuring systems ensure high manufacturing accuracy. Automatic universal milling head Diagonal milling head 45° with C and A axes, positionable to 0.01°, liquid-cooled, GGG-60 cast iron construction. C-axis ±180°, A-axis ±360°, separate axis drives, helical gearing with ±3 sec indexing accuracy, hydromechanical tool clamping and internal and external coolant supply. Drive via frequency-controlled, liquid-cooled main motor. Electrical system / power supply Electrical equipment according to EN 60204, 400/230 V, 50 Hz, fuse rating 160 A slow-blow, control voltage 24 V, connected load approx. 80 kVA. Protection class IP54 for control cabinet, motors and drives. Control cabinet cooling with closed two-chamber system. Compressed air connection 6 bar, G 1". Energy-saving mode with standby function and power consumption under 1 kW. Equipment Heidenhain TNC 640, electronic handwheel HR 510, operator panel support 2 x 800 mm, remote diagnostics via network or SIM card. Lubrication depending on the component via pulse central lubrication, grease, oil mist and grease lubrication. Painting in RAL 7016, RAL 7004 and RAL 7035 with green-yellow accents. Installation / clamping technology TightBlock substructure for flush floor installation with high mass for damping and customer-specific arrangement of fixators. Clamping plate DIN 876/2, 2,000 x 2,000 mm, T-slots 22 H12, spacing 250 mm. CNC rotary table Ø2,000 mm, 15 t load capacity, centering bush Ø100 H7, radial run-out 0.010 mm, axial run-out 0.025 mm, speed 5 1/min. Tool and coolant system Hedpfoy Uktwjx Aarjn ToolCenter for 48 tools with simultaneous loading, double gripper, automatic loading flap and approx. 10 s tool change time. Max. tool Ø125 mm, with free adjacent slots Ø250 mm, length 500 mm, weight 25 kg. Coolant system 950 l with paper band filter, filter fineness < 50 µm, high-pressure pump 40 bar / 32 l/min and washing gun. Main drive / safety Liquid-cooled AC main drive directly on the milling head: 50 kW at 100% duty cycle, 75 kW at 40% duty cycle. Speed 10–6,000 1/min, torque 802 Nm or 1,204 Nm. Tool holder SK 50 BIG-PLUS, draw-in force 20 kN. SHW UniScan for 3D crash and vibration monitoring as well as machine diagnostics. Additionally: laser tool measurement, wireless measuring probe Renishaw RMP 60 Q, operating mode 3, 3-sided splash and chip guard, safety access, cladding panels, longitudinal grating and hinge belt chip conveyor.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW Hjdpjyn Ikrofx Aaren - Required space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) Hsdpoqzhxijfx Aarjn - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: excellent (used), Diameter: 800mm Hjdpfx Aaewvrp Aeron 3 Chuck: yes Spindle bore:130mm Connector: Camlock 13 Max. speed: 100Rpm Length: 800mm Width: 800mm Height: 400mm Weight: 200kg

Condition: new, Year of construction: 2025, functionality: fully functional, High-Performance Automatic Bandsaw with Feed, Chip Conveyor, and Enclosure – For Precision Serial Cutting Are you looking for a powerful and reliable solution for precise and economical sawing in your production? Our automatic bandsaw with feed system, chip conveyor, and enclosure features state-of-the-art technology, delivers high cutting precision, and offers a range of smart automation functions – ideal for industrial use, metalworking, and serial production. Technical Highlights at a Glance: Cutting Capacity: Ø 325 mm or 380 x 325 mm Saw Blade: 4242 x 34 x 1.1 mm Saw Drive: 3.75 kW Weight: 2,200 kg Working Height: approx. 820 mm Power Connection: 400 V / 50 Hz Modern Control & Equipment: - Intuitive Smart NC control with 5.7" HMI touchscreen – programmable for up to 100 cutting programs Hedpfx Aasxp I Raersn - Powerful Mitsubishi PLC control - V-Drive frequency control – stepless cutting speed adjustment from 15–100 m/min - Digital display for feed rate, cutting performance & saw frame position - Material database for automatic parameter selection based on material type - Automatic initial cut function with freely programmable head cut length - LED signal light for machine status & LED work light - Hydraulic (adjustable) chip conveyor & coolant system with cleaning nozzle - Hydraulic blade tensioning with blade break monitoring - Vibration damping roller for smooth cutting surface - Automatic blade guide arm positioning - Material retraction after cutting to protect the saw blade - Slow-motion function for manual material positioning - Infeed-side material support (approx. 1,500 mm) & discharge table with coolant return (approx. 500 mm) Immediately available – Ready for demonstration in our showroom! The machine is connected and ready for demonstration at any time in our exhibition hall – see for yourself the quality and performance! No transport? No problem! Upon request, we will organize professional loading and secure transport directly to your location – fast, reliable, and hassle-free. 📞 Interested? Contact us today for a non-binding consultation or a live on-site demonstration!