Machining center

Röders Tec RXP400DS/RXD5

Condition: new, Year of construction: 2025, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Hjdpfx Adeia N Eqo Ajfr Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 37 kVA, torque: 236 Nm, controller manufacturer: Heidenhain iTNC530, controller model: iTNC530, table width: 700 mm, table length: 1,700 mm, table load: 700 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,580 h, spindle motor power: 37 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, Heidenhain iTNC530 3-axis CNC machining center Stroke x 1500 mm Stroke Y 700 mm Stroke Z 610 mm Table dimensions: 1700x700mm SK40 tool holder Magazine 48 tools Rapid feed 36m/min Table load: 700 kg Hedpsvz Tyusfx Ad Aofr Spindle center coolant 20 bar Chip conveyor Crank

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, ANAK – MATIC 7 CNC – 3-Axis machining center | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm. Compact and reliable 3-axis CNC machining center, ideal for precise milling operations. Equipped with high-speed spindle and HEIDENHAIN control. 🛠 Key specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 • Number of axes: 3 • Table size: 1150 x 475 mm • Machine weight: 5000 kg ✅ Perfect for: • Small to medium part production. • Job shops and subcontract machining. • Tooling, moldmaking, general precision parts. 📌 Ready for immediate delivery. Hedpfskuz I Nox Ad Aefr Stable, accurate, and proven – powered by HEIDENHAIN.

Condition: ready for operation (used), Year of construction: 1996, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, Weiler Voest Alpine E50 lathe Comes with 3-jaw chuck and 6 multifix tool holders Hedpfxon Hp T Aj Ad Aofr

Condition: new, Year of construction: 2024, functionality: fully functional, Konica Minolta’s AccurioShine 3600 with iFoil One option allows printers to meet the demanding needs of today’s printing requirements. The device enables in-house spot UV varnishing, from prototyping to full production, without the need for screens, plates or dies. The AccurioShine 3600 with iFoil One utilizes ground-breaking technology for adding 2D and 3D gloss effects, as well as 3D embossed foiling at a reasonable cost without the complicated steps of conventional systems, allowing printers a range of high-impact finishing effects never seen before – such as personalized embossed foil, while raising profit margins. This machine is a newer generation of MGI JETVARNISH 3D ONE with iFoil Please find all technical specifications in brochure attached. For more info - please contact directly. * Professional demonstration and loading is included in the price. Location - Vilnius, Lithuania. Very good opportunity if you are looking for such a machine! Also available MGI JETVARNISH 3DS with foil unit. It has possibility to print on sheet up to 120 cm length. Hedpjwmnz Aofx Ad Asfr

Year of construction: 2012, condition: good (used), 60t turning roll, roller bed with polyurethane wheels. turning speed: 60-1.200 mm/min Hsdpfx Adofvhp Hj Asfr workpiece diameter: 600-7.500 mm availible also for renting

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. EXW price incl. loading. Hfedpfx Aeuyh Tdsd Aer More information on request.

Condition: excellent (used), Year of construction: 2014, load capacity: 400 kg, arm reach: 2,550 mm, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2014 Payload: 400 kg Reach: 2550 mm Type: Foundry Plus Working hours: 38982 Condition: Used & Tested Cabinet: M2004 Teach Pendant: Included Hfodpfxsq Ap Dwe Ad Asr Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Please note that the price does not include shipping costs. (Source: ABB's Website)

Condition: excellent (used), Rounding machine tool for poles/stakes production. Diameter of finished product from 40 mm to 140 mm. Machine tool was renovated. New bearings, new back side shoulders gears, renovated electrical cabinet and installed new optical sensor for pneumatic pressure, partly renovated pneumatic system (3 new cylinders). Hodpfxouvg Htj Ad Aefr

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 200.12.010.13, year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Hsdpetvfihjfx Ad Asfr