MACHINING CENTER

Quaser MV204CPL

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel Hedpfjndz Aqsx Ah Ssfd meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: new, Year of construction: 2026, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Hsdpjia N Eqjfx Ah Sjfd Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Controller: Fanuc 18 iMB (X)-axis: 1,524 mm (Y)-axis: 700 mm (Z)-axis: 610 mm 4 axes Kitagava table with quill Spindle taper: 40 BBT Spindle motor: 30 kW AC Spindle speed: 12,000 rpm Through-spindle cooling: 20 bar Hodpfsx Tqgnox Ah Sjfd Tools: 48 Table size: 1,700 x 700 mm Machine weight: 9,800 kg Machine dimensions: 2,950 x 4,480 x 3,030 mm

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor Hfedpfjw Adhwjx Ah Ssd • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: new, Year of construction: 2024, functionality: fully functional, Konica Minolta’s AccurioShine 3600 with iFoil One option allows printers to meet the demanding needs of today’s printing requirements. The device enables in-house spot UV varnishing, from prototyping to full production, without the need for screens, plates or dies. The AccurioShine 3600 with iFoil One utilizes ground-breaking technology for adding 2D and 3D gloss effects, as well as 3D embossed foiling at a reasonable cost without the complicated steps of conventional systems, allowing printers a range of high-impact finishing effects never seen before – such as personalized embossed foil, while raising profit margins. This machine is a newer generation of MGI JETVARNISH 3D ONE with iFoil Please find all technical specifications in brochure attached. For more info - please contact directly. * Professional demonstration and loading is included in the price. Hfodpewmnz Asfx Ah Sod Location - Vilnius, Lithuania. Very good opportunity if you are looking for such a machine! Also available MGI JETVARNISH 3DS with foil unit. It has possibility to print on sheet up to 120 cm length.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, ANAK – MATIC 7 CNC – 3-Axis machining center | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm. Compact and reliable 3-axis CNC machining center, ideal for precise milling operations. Equipped with high-speed spindle and HEIDENHAIN control. 🛠 Key specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 Hfodpfx Ahokuz I Ns Sjd • Number of axes: 3 • Table size: 1150 x 475 mm • Machine weight: 5000 kg ✅ Perfect for: • Small to medium part production. • Job shops and subcontract machining. • Tooling, moldmaking, general precision parts. 📌 Ready for immediate delivery. Stable, accurate, and proven – powered by HEIDENHAIN.

Condition: ready for operation (used), Year of construction: 1996, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, Weiler Voest Alpine E50 lathe Hfsdsn Hp T Aepfx Ah Sed Comes with 3-jaw chuck and 6 multifix tool holders

Condition: used, Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,687 mm, The Micron VCE 1000 Pro is a powerful and precise CNC machining center designed for demanding milling tasks. With travel distances of 1020 x 560 x 600 mm, it enables flexible machining of medium-sized workpieces. The machine is equipped with a Heidenhain iTNC 530 control, an ISO 40 tool taper, and a spindle speed of up to 10,000 rpm, making it ideal for high-precision, high-speed machining. Hedpfx Ahexyig Ro Sefd The robust table with a 1000 x 560 mm T-slot area supports workpieces up to 1,350 kg. Fitted with a chip conveyor, coolant pump, and a 18.5 kW motor, the VCE 1000 Pro offers a reliable combination of power and precision.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Manufacturer Quaser Model MV184P/12B Year of manufacture 2015 Condition (Used) Excellent Control Heidenhain 530iTNC Equipment 4th axis and tailstock, spindle probe, tool probe, tool holders, conveyor, tool changer switch Machine specifications X-axis travel Hfsdexx Shhspfx Ah Sed 1020 mm Y-axis travel 610 mm Z-axis travel 610 mm Max. workpiece weight 500 kg Spindle speed 12,000 rpm Table size 1200 x 600 mm 30-position tool changer BT40

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. Hsdpfx Ahjuyh Tdo Ssfd EXW price incl. loading. More information on request.