Surface grinding machine

OKAMOTO Precision Surface Grinding ACC-16*24SA1

Condition: used, Year of construction: 2009, grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm control Siemens Sinumerik 840 D internal grinding depth max. 800 mm External grinding length max. 600 mm turning speed range - stepless 1-795 U/min workpiece length max. 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Setup speed (tapping): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through bore 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (clamped in flight) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Mounting bore grinding block (diameter): 100 mm / 125 mm - Mounting length grinding block: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm External and surface grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of external grinding spindles: 7.5 kW - Mounting bore of grinding block: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges/grinding wheel holders - Various clamping jaws - Coolant system - Oil mist filter Bdsdpfx Aowp S Tnommjg - Cooler - Technical documentation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Bdedpszr I R Ejfx Ammog Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW Bdodpfsyuqacex Ammjg TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Bdjdpfexf Ikfsx Ammsg

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Bdsdpfx Amjy En Dnomjg Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, operating hours: 4,198 h, functionality: fully functional, machine/vehicle number: 5070-0016, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 300 mm, distance table to spindle center: 575 mm, grinding wheel width: 50 mm, overall weight: 3,000 kg, space requirement height: 2,300 mm, space requirement length: 2,960 mm, space requirement width: 3,200 mm, Used surface grinding machine Bsdpfjy Ry Dqsx Ammsdg Very well-maintained condition

Condition: excellent (used), x: 3200mm y: 1500mm z: 1000 CNC FAGOR 8050 (7 axes) Bdjdpfxjwrx U De Ammjg

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Bsdpfx Ajwaa Iuemmedg

Condition: good (used), Year of construction: 2016, Contact us for more information Bsdpfoy Enr Sex Ammedg

Condition: excellent (used), Year of construction: 2013, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL254131163, spindle motor power: 18,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,050 mm, overall weight: 6,100 kg, MORI SEIKI NLX2500Y-700 Turning Cente Dimensions • Machine Depth: 3056 mm • Machine Height: 2187 mm Bdjdpfx Aozukn Eemmjg • Machine Weight: 6140 kg Movement • Number of Axes: 5 • X-axis Travel: 260 mm • Y-axis Travel: 50 mm • Z-axis Travel: 795 mm Technical Specification • Spindle Speed: 4000 RPM • Tool Stations: 12 Additional Information • Swing over bed 920 mm • Swing over the cross-slide 742 mm • Maximum cutting diameter :366 mm • "maximum cutting length: 705 mm • Bar capacity: 80mm • Spindle motor power: 18. 5/15kw • Milling motor power: 5. 5kw, speed 10000 rpm • Rapid feedrates: xyz: 30 x 10 x 30m/minute • Tool setter, parts catcher, swarf conveyor • 3 jaw chuck, interlocked guards, low volt light Spindle nose: ASA 8" Tailstock: MT5 Tailstock quill diameter: 80 mm Tailstock travel: 734 mm Turret stations: 12 positions Motorized tool positions: 12 Turret tool coupling: BMT Turning tool size: 25 × 25 mm Boring bar capacity: 50 mm Maximum driven tool speed: 6,000 rpm Driven tool motor power: 5.5 / 7.5 kW C-axis0.001° indexing Additional equipment Chip conveyor