Hydraulic shear

MVD 4100 X 6 mm

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Knodon Nv H Sspfx Ahcsa Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display Kedpfx Ahsuagxpscjna - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Kedpfx Ahsrx Sydocsna Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Swing in gap 910 mm Kjdpfoyt Ihnox Ahcsna Gap length 357 mm Center height 250 mm Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock - Coolant system - 4-way tool post - Machine light - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: Knedpfx Aowrhxfehcsa >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. Knodpfxoty A Ehe Ahcsa - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 6,250messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting Kodpfxeh Talzj Ahcjna • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm Ksdpfxeuiz I Dj Ahcena distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) Kodpfx Aoin Etzohcona CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. Knjdsizw E Aopfx Ahcoa For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.