Metal Bandsaw Double Miter

MEBAswing 405 DG

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-135° The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle Digital mitre display, accuracy 0.1° Fast material clamping. Material is always clamped at 90° regardless of the angle to be cut Hydraulic material clamping via full-stroke clamp MEBA – Power-Package “HSS“ Hydraulic lifting and lowering of the saw frame hydraulic clamping of the material stepless, hydraulic cutting pressure- and feed regulator display of lowering speed via scale display of cutting pressure via manometer rapid lowering of the s aw frame via button until material edge Golhcdebrq Txewzjud Complete coolant equipment with electro-pump Chip box Saw blade drive with end of cut stop Combined precise saw blade carbide-roller guidance with saw blade brush Instruction manual and spare parts list on CD-ROM Frequency regulated AC-drive 15-150 m/min, 3 kW Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031) 1 saw blade 4/6 tpi Additional standard equipment for 405 DG --ᐳ Control panel separately mounted Model Semi-Automatic Miter 90° Ø 325mm, square 500x300mm 45° right Ø 360mm, square 300x300mm 30° right Ø 200mm, square 200x200mm 45° left Ø 300mm, square 300x300m Motor:[kW]3 Blade:[mm]4200x34x1,1 Blade speed: 15-150 m/min Working heigt:[mm]750

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter Gujlhcjbi S Dijdwzsd 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900