Metal Bandsaw Double Miter

MEBAsteel 1100 DG

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 4191326, Vortman 630/100M+ saw Meba 510 Brud2Inhmka

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 E9Ywvd3D Weight (kg) 5000

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Vsng9M Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. Bd7P9Rm8Ks DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Ekdjtxp Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DG11000SE, overall weight: 210 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 8 kW (10.88 HP), output frequency: 50 Hz, type of output current: three-phase, nominal power: 8 kW (10.88 HP), nominal power (apparent): 10 kVA, continuous power: 8 kW (10.88 HP), total length: 1,050 mm, total width: 700 mm, total height: 860 mm, motor speed: 3,000 rpm, type of cooling: air, We present the portable power generators for your uninterrupted power requirements. Newpower generator DG11000SE -3D model power generator The DG11000SE -3D power generator offers you a continuous output of 8 kW with its reliable 4-stroke 3000 rpm engine. You can operate the DG11000SE -3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. Rils8Gekkh TECHNICAL DATA Frequency (Hz): 50 Maximum power (kW): 8.0 Rated power (kW): 7.5 Nominal voltage (V): 230/400 Power factor (cosφ): 1.0 DC output: 12V/8.3A Power: single-phase-three-phase Generator type: self-excited alternator, 2-pole single-phase or three-phase Starting device: E-start or rope pull Noise level (7m): 70-73 dB Tank capacity (L): 30 Dimensions: 1050x700x860 mm Weight: 210kg ENGINE DATA Model: HR198FA Engine type: Diesel engine four-stroke, air-cooled, vertical cylinders Bore* stroke ( millimeters ): 98*84 Fuel: Diesel Oil lubrication Quantity (L): 2.0 Combustion system: Direct injection Functions Voltmeter: Yes Sockets: Yes Circuit breaker: Yes Oil light and oil alarm: Yes Wheels: Yes DC switch: Optional Control unit: Optional ATS: Optional Remote control: Optional

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DG15000SE3-3D, type of input current: three-phase, input voltage: 230 V, frequency: 50 Hz, type of cooling: air, total width: 1,130 mm, total length: 760 mm, total height: 860 mm, fuel: diesel, overall weight: 230 kg, continuous power (apparent): 12 kVA, continuous power: 10 kW (13.60 HP), rotational speed (max.): 3,000 rpm, rotational speed (min.): 3,000 rpm, warranty duration: 12 months, noise level: 75 dB, fuel tank capacity: 30 l, power: 11 kW (14.96 HP), We provide the mobile power generators for your uninterrupted power requirements The DG15000SE3-3D power generator offers you an output of 11000 watts with its reliable 4-stroke engine. You can operate the DG15000SE3-3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. Technical data: Gxbzc2E Maximum output : 11 kW Rated power : 10 kW Frequency : 50 Hz Speed : 300 rpm. Rated voltage: 230 V / 400V Power factor (cosφ) 1.0 DC output 12V/8.3A Power SINGLE-PHASE / THREE-PHASE E-Start Noise level (7m) 70-73 dB Tank capacity (L) 30 L Dimensions 1130x760x860 mm Weight 230kgs

Condition: excellent (used), CATALOGUE NUMBER 6145 TECHNICAL DATA - max. width of the processed element 1100mm - max. height of the processed element 140mm 3 units: 1) grooved rubber roller for calibration 15kW 2) grooved rubber roller for calibration 11kW 3) grooved rubber roller for calibration 11kW from above: - metal sliding roller - sliding rubber roller - unit - 2 rubber rollers, sliding - unit - 2 rubber rollers, sliding - unit - sliding rubber roller 2W0Wxy from below: - feed table 3600x1000mm - feed speed regulated on a 0.25kW inverter - pulling belt - 3 rubber rollers, sliding, output - pneumatic belt oscillation on photocells - belt blowing - electric table lifting - lifting motor 0.75kW - smooth feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - diameter of exhaust port 110mm, 80mm - working pressure 6-8bar - diameter of exhaust port 3×150, 3x200mm - overall dimensions of the machine L/W/H 3400x2300x2800mm - feeder dimensions L/W/H 3000x1300x900mm - pump dimensions L/W/H 600x950x940mm - weight approx. 5000kg Net price: PLN 39,900 Net price: 9380 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Year of construction: 1999, Condition: excellent (used), WIDE BAND SANDMACHINE, 2 AGGENATES, CONTACT SHAFT AND SHAFT WITH COIL, SANDMACHINE Bottom drive shaft motor 15 kW, motor with coil 7.5 kW, smooth feed regulation Dgmrm99

Condition: good (used), Dimension: Width: approx. 2.900 mm Height: approx. 1,038 mm Depth: approx. 1.100 mm Technical data of the workbench frame: Manufacturer: Jung Heinrich Type: T Included in delivery are: 02x workbench stand, used material color: blue stand height: 1.000 mm stand depth: 1.100 mm stand profile: 100 x 65 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( welded truss ) 02x workbench crossbars, used Material color: yellow box profile: 120 x 50 mm type of truss: HN 120|25 clear width: 2.700 mm Czeyb9Dnx3 04x safety pins, used execution: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.900 mm Depth chipboard: 1.100 mm Chipboard in two parts if necessary 08x drilling screws, new Finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: used, Year of construction: 1998, Functionality: fully functional, Wide belt sander CB 2NRT1100 Year of production 1998 Working width 1100mm Cd3Vsdazrc Available immediately!

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm E9Esyen The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 5,623 h, load capacity: 8,000 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: standard, drive type: Diesel, Diesel forklift Crrdzamorg Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Description: The vehicle is UVV checked Before delivery the machine gets a service 3rd valve, 4th valve, heating, full cab, air conditioning,

Condition: used, FAT Haco 630/1100 TUR MN CNC Centre Lathe with Fanuc Series 32i - Model B, 8 Position Tool Turret, Quick Release Toolpost Holder, 4 Jaw Chuck and Driver Plate for Centres, Fixed Steady, Various Toolpost Tool Holders, Swarf Conveyor. S/No. 130588 Drf09H Location: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm Dq3Iql no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: like new (used), Year of construction: 2013, Clamping force: 1100 t Screw diameter: 90 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Shot volume: 3050 cm3 Type: Horizontal R3Eqpiutk Drive: Hydraulic Machine has only 3500 hours used only for test production. CC200 controll Robot Linear

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Bsiipeb3Bds Machine size 4,8 x 3,8 x 2.6 meter installation on request. price free on truck Rotterdam.

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 555 h, load capacity: 8,000 kg, lifting height: 5,650 mm, mast type: standard, construction height: 4,018 mm, drive type: Treibgas, LPG forklift Load centre of gravity: 1100 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Side shift, fork positioner, Bjyup3O2Ec 3rd valve, 4th valve,

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 8,548 h, load capacity: 8,000 kg, lifting height: 8,900 mm, fuel type: diesel, mast type: triplex, construction height: 4,340 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Dq0Tnj Technical condition: very good 3rd valve, 4th valve, heating, soot filter, full cab,

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Dq7Vbv Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: new, Year of construction: 2025, Siemens ONE control system Turning diameter over bed: 800/950/1100 (optionally 1200) mm Center distances: 2,000 to 16,000 mm Spindle bore: 140/220/320/360 and 450 mm Parat holder, Multifix, Recolver, C-axis ... B2Tcnippxc ++ Wide range of options and automation available on request ++

Year of construction: 2007, Condition: good (used), Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide built: 2007 Ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.100mm (1 x 800mm, 1x3900mm & 1x2400mm) Overall width incl. motor: 700 mm Information on the belt Bbaqjhvzvz Belt width: 400 mm Belt type: Front Groove belt type: KT202

Condition: good (used), Agilent HPLC system - including PC & software The list price includes the following 1100 series modules: - tray - degasser - pump - autosampler - column oven - VWD detector We can built almost any kind of HPLC setup according to your need. For the exact pricing please inquire. Available modules: Brand Series Model Type Quantity Agilent 1100 G1310A ISO pump 1 Agilent 1100 G1311A Quat pump 4 Agilent 1100 G1313A ALS 1 Agilent 1100 G1314A VWD 7 Agilent 1100 G1315A DAD 1 Agilent 1100 G1315B DAD 4 Agilent 1100 G1316A Column Oven 1 Agilent 1100 G1318A Column Oven 6 Agilent 1100 G1329A ALS 1 Agilent 1100 G1330A ALS Therm 1 Agilent 1100 G1330B ALS Therm 1 Agilent 1100 G1361A Prep pump 2 Agilent 1100 G1367A Well plate auto sampler 4 Agilent 1100 G1376A CAP pump 1 Agilent 1100 G1379A Degasser 4 Agilent 1100 G1379B Degasser 4 Agilent 1100 G2260A Prep ALS 1 Agilent 1200 G1315D DAD 1 Agilent 1200 G1330B FC/ ALS Therm 1 Agilent 1200 G1364C Analytical FC 1 Agilent 1200 G1367B Well plate ALS 1 Agilent 1260 G1314F VWD 1 Agilent 1290 G1330B Thermostat 2 K80Xtwilc Any questions please feel free to ask. Please check out our other listings as well.

Condition: good (used), Year of construction: 2007, Belt conveyor, Transnorm, approx. 1.20m long - second-hand - Price ex location (net): only 695.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, Cw7Cs72F various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos87 Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of construction: 2007 Length: approx. 1,20m Belt width: approx. 50cm Element width: approx. 60cm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Year of construction: 2007, Condition: good (used), Features Used belt conveyor of the manufacturer Transnorm Colour: silver Incl. SEW motor and side guide Ideal for fast material transport Professionally dismantled and packed Condition: fully functional Material: Aluminium Year of manufacture: 2007 Belt conveyor The belt conveyor is ideally suited in the picking zone to interlock machines or workplaces and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. In addition, it enables efficient transport of parts in the factory and warehouse and serves to convey considerable quantities and distances. Technical data: Dimensions of the belt conveyor total length: 7.180 mm Total width: 700 mm Muafj8 Details of the belt Belt width: 400 mm Belt type: Lenks groove Belt type: KT202