MEBA chip conveyor

MEBA

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, operating hours: 5,800 h, MEBA Mebamat 434 Automatic metal band saw Manufacturer: Meba Type: Mebamat 434 Nljdpsy Egfdjfx Ah Nsa year of construction 2013 Condition: good, used Switch-on hours: 14.800h Sawing hours: 5682h NC-automatic version Motor 7.5 kW Saw band 6220 x 41 x 1.3 mm Belt speed 15 - 150 m/min. Max. Material passage Ø 430 / 430 x 430 Smallest Ø 5 mm Dimensions (L x W x H) 1700 x 3100 x 2350 mm Working height 750 mm Weight 4100 kg Zero stop Scraper chip conveyor Minimum quantity lubrication Automatic material height and width detection Roller conveyor 300cm 8x new replacement saw bands

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t Nljdpfep Rai Esx Ah Nea dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Hello, For sale: MebaEco 335 DGA band saw. Fully automatic CNC-controlled machine. The machine has been refurbished, is fully operational, and has been prepared for work by the authorized Meba band saw service in Poland. The machine has been thoroughly inspected, and all parts requiring replacement or repair have been consistently identified and replaced. Below are the technical specifications of the saw: Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Table height: 750 mm • Feed range: from 5 to 2300 mm per stroke Nlsdpfx Aeyzqv Soh Nja • Cutting area at 90°: flat material 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat material 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting capacity at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: stepless adjustment from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 3.0 kW Once programmed, the machine feeds the material automatically using the feed vise. Additionally, in the attached video you can observe the saw in operation. If you would like to see the machine in person, that is not a problem. The saw is currently located in our warehouse. If you have any questions, please feel free to contact me via email :)

Condition: ready for operation (used), Year of construction: 1981, Round cutting area: 170 mm Nljdpfxewuryrs Ah Nsa Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Blade speeds: 150, 355, and 95 m/min Saw drive: 380 V, 0.75 kW Space required: 1400 x 600 x 800 mm Weight: 340 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Parameters: Cutting diameter: 330 mm Cutting range (90° flat): 350 x 330 mm Nljdpfx Ajx H Rynsh Noa Saw band length: 4900×34×1.1 mm Cutting speed: 15–150 m/min (adjustable) Max. workpiece weight: 670 kg/m Total power requirement: 3.9 kW Table height: 750 mm Machine weight approx.: 2,600 kg Required space approx.: 1,700×2,400×2,200 mm Equipment: Laser line for cutting indication/marking Cutting process control Material monitoring Material database Feed force adjustment Zero stop Job menu Bundle cutting clamp Vertical roller Double-sided opening / reduced end scrap Operation and Comfort: Swiveling control panel LED work lighting Receiving table Water spray gun Chip and Coolant Management: Screw chip conveyor Micro-dosing Coolant level and flow control

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm Nedpfx Ajwf Hm Ioh Nela • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical specifications: • Cutting diameter: 410 mm • Blade dimensions: 5800 x 41 x 1.3 mm • Feed range: from 5 to 2300 mm per stroke • Cutting area at 90°: flat sections 700 mm x 410 mm • Cutting range at 45°: approx. 410 mm • Cutting area at 45°: flat sections 500 x 410 mm • Circular cutting at 45° (left side): 305 mm • Cutting area at 45° (left side): flat sections 430 x 410 mm • Maximum cutting range at 30°: approx. 320 mm • Cutting area at 30°: flat sections 320 x 410 mm • Cutting speed: stepless adjustment from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 5.5 kW • Machine weight: approx. 3,450 kg Standard equipment for MEBAeco 410 DGA-2300: • CE-compliant access protection with light barrier. • Robust MEBA twin-column linear band saw design with automatic material feed (range 5–2300 mm per stroke). • CNC control enabling easy program entry and visualization. • Automatic mitre cutting from 30° to 135°, with programmable length and number of parts. • Capacity to create and manage up to 255 cutting programs. • Intuitive data input minimizing operator error risk. • Blade break monitoring sensor • Hydraulic blade tensioning system • Band cleaning brush with separate motor • Cutting line laser marker • Micro-sprayer: blade cooling with oil MEBA High Performance Package: • Saw feed realized via servodrive and ballscrew mechanism, with automatic monitoring of cutting pressure and feed. • Consistent and optimized working conditions for different materials, including thin-walled profiles. • Precise and fast material positioning via AC rack drive with stroke length up to 2300 mm and integrated driven roller conveyor up to 3000 mm in length. • Vice jaw system with double-sided opening capability, including support bars for heavy material handling. Construction and functionality: Njdpfjx Hyclex Ah Nsla • Solid, vibration-resistant welded steel frame. • Saw blade positioned at a 3° angle to the table for increased efficiency and extended blade life when cutting steel profiles. • Composite blade guides with precision bearings minimizing blade deviation. • Carbide sliding guides for maximum precision. • Zero point (mitre axis) located at the intersection of the blade and moveable clamping jaw — eliminates need for length correction when changing angle. • Automatic angle programming from the control panel. Vice system: • Patented dual angle vice system with automatic adjustment to cutting angle, ensuring secure and accurate material clamping near the cutting line. • Clamping via full-stroke hydraulic cylinders. Other features: • Automatic lowering of the saw frame ahead of the material at the beginning of cut for minimized cycle times. • Optimal conditions for both single and batch operations. • Stepless speed control of the band drive via frequency inverter (15–150 m/min). • Precisely pre-machined components eliminating play.

Condition: used, Year of construction: 2003, cutting diameter 325 mm saw band length 4200 mm cutting width 500 mm Nledpfxjyv Ny Ss Ah Noa 15 - 150 m/min. work height max. 750 mm

Condition: used, Year of construction: 2000, dimensions of saw-band 4200 x 34 x 1,1 mm capacity 90 degrees: round 325 mm capacity 90 degrees: flat 500x300 mm 300 mm 300x300 mm 200 mm Nodsyv Nwkepfx Ah Nola 200x200 mm weight of the machine ca. 1250 kg dimensions of the machine ca. 2250 x 2100 x 1280 mm

Condition: used, Year of construction: 1999, dimensions of saw-band 4200 x 34 x 1,1 mm saw band length 4200 mm cutting speed 15 - 150 m/min capacity 90 degrees: round 325 mm capacity 45 degrees: round 300 mm capacity 90 degrees: flat 500 x 300 mm capacity 45 degrees: flat 300 x 300 mm cutting speed 15 - 150 m/min Working height 750 mm dimensions 1300 x 2050 x 1400 mm Nlsdpfx Ajyv Nk Deh Noa