Used Doosan Solar 015 Plus for sale (253)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm Dedpfeq Nqkxox Aifjck MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2014, turning diameter 320 mm turning length 510 mm control i Serie Fanuc swing diameter over bed slide 250 mm spindle turning speed - stepless 6000 U/min spindle bore 65 mm power capacity 15 kW total power requirement 20 kW weight of the machine ca. 3.5 t dimensions of the machine ca. 2,59 x 1,6 x 1,7 m Dedpfx Aezl E Rieifsck Machine has chip conveyor and Tail stock. It has C- axe and live tooling. Control: Fanuc i series

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT20SY0117, total height: 2,500 mm, total length: 4,100 mm, total width: 2,240 mm, overall weight: 12,000 kg, Control: Fanuc 18i - TB Dcjdpfx Aiozq A Dkjfsk Swing over cross slide: Ø800 mm Max. cutting diameter: Ø620 mm Max. turning length: 740 mm Main spindle: speeds 50-5,000 rpm Spindle bore/Spindle nose: Ø76.2 / Ø68 Number of turrets: 12 B-axis: Ø810 mm Rotary tools: speed 50 – 4,000 rpm Rotary tool motor (turret one/turret two): 7.5/5 HP Rapid traverse (X/Z/Y): 790 / 20 m/min Sub spindle rapid traverse: 20 m/min Dimensions: Floor space: L = 4100 x W = 2240 x H = 2500 Machine weight: 12000 kg.

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,320 h, Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 900 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m Dsdpfx Aozb Nc Neifsck = Additional options and accessories = - Central lubrication

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Dcsdpeilfltofx Aifjk Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection Djdponkcaaofx Aifeck (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, Internal combustion forklift Mast type: Triplex Transmission: Automatic Front tire type: Superelastic Front tire size: 650-10 Rear tire type: Superelastic Dodpoyfy Ahofx Aifeck Rear tire size: 28x9-15 Power steering; Windshield wiper; Operating weight with attachment: 4798 kg

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,310 h, Equipment: air conditioning, Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = Dedpfjzb Ndtox Aifock - Central lubrication

Condition: like new (used), Year of construction: 2020, operating hours: 4,300 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this Doosan PUMA TT1300SYYB CNC turning and milling center, in like-new condition, manufactured in 2020. Manufacturer: Doosan Dcedpoyryymsfx Aifek Model: PUMA TT1300SYYB Year of manufacture: 2020 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or require further information, please do not hesitate to send us a message or call us. For sale: a nearly new Doosan PUMA TT1300SYYB from February 2020, equipped with an LNS SPRINT 565 S2 automatic bar feeder with motorized chucks and only 3,800 cutting hours. It is a high-end, multitasking CNC lathe with a double spindle and double motorized turret, featuring an independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized double spindle -Double turret with motorized tools -Upper and lower Y-axis (SYYB configuration) -Simultaneous machining of both sides -Drastic reduction in cycle times -High precision and thermal stability -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch chucks Special price: 165,000 EUR, WORKING HOURS: ONLY 3,800 CUTTING HOURS. Available for inspection and test run. Simultaneous machining with two turrets. Automatic transfer between the main and sub-spindle. Possibility of finishing the complete part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,955 h, load capacity: 2,500 kg, lifting height: 4,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,190 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: DOOSAN D25S-5 diesel forklift - - 2.5 ton lifting capacity - - Year of manufacture 2015 - - Side shifter - - Triplex free-lift mast - - Overall height 2.19 m - Lifting height 4.75 m - - 3955 operating hours according to meter - - 4-cylinder YANMAR diesel engine, 58 hp - - Solid rubber tires, front approx. 90%, rear approx. 80% - - Half cab, lighting system - - Simple and mechanical forklift - - Good condition - - - Delivery possible! Side shifter, Dodpfx Aozngxmoifeck 3rd valve, rear work light, front work light, windshield, half cab, CE certificate.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication Dcedezlcyuopfx Aifok - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, Dodjzhwg Uopfx Aifsck table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock, Djdpfxezhwgho Aifjck

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Djdpfx Aijy Takiefsck Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2023, operating hours: 1,773 h, 2023 | Doosan DX225LC-5 | Used Tracked Excavator | 1773 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Dcsdpfx Aijzkuk Nefek 💰 Buy Now for EUR 140000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 67 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine with very few hours, in very good condition, no issues. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40971 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2021, operating hours: 2,348 h, 2021 | Doosan DX225LC-5 | Used Tracked Excavator | 2348 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 120000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 66 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in very good condition. Few hours and the track is almost new. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41033 Equippo" is commonly used when looking up more details online. Dcodpozkuaksfx Aifsk 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Dcsdpfxoxq R Evs Aifsk

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required. Dedpfx Aezcmmnoifeck

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm B-axis travel: 590 mm Dcsdpfsyiu Dnex Aifsk Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: used, color: orange, Year of construction: 2017, operating hours: 6,300 h, Empty weight: 23.500 kg Track width: 60 cm Digging depth: 10.795 m Dsdpfozi Ecasx Aifeck

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Dodpfszk I R Asx Aifjck Technical data shown on pictures.

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Dedpfxezg Eb Ds Aifsck Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, x-axis travel 520 mm y-axis travel 360 mm z-axis travel 350 mm Spindle speed 12,000 rpm Spindle-to-base distance min./max. 150 - 500 mm Table surface 650 x 375 mm Tool weight max. 2.8 kg Table load 2 - 200 kg Control system Fanuc i Machine weight approx. 5,200 kg Dimensions 3,230 x 1,620 x 2,507 mm Equipment/Accessories: - Rigid tapping – thread drilling without a compensation chuck - 14-position tool magazine (T3600D) Dsdpszk D Dfjfx Aifock - Speed range 12,000 rpm - Spindle speed and power display - Telescopic covers in the X, Y, and Z axes - Rapid traverse rates in the X, Y, and Z axes - Door safety switch - 3-color indicator light - Work area lighting - Coolant supply from the 200 l tank via adjustable coolant nozzles on the spindle nose - usable table load of 2 x 200 kg - 21-position tool magazine - Internal cooling - Machine cover, closed top / top cover - Oil skimmer - Pneumatic clamping, 1 pair per pallet - Automatic work area door with safety strip - Coolant system, delivery pressure 4.5 bar Operating hours: 14,317 h

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Dcjdpswwtrbofx Aifjk

Condition: used, Year of construction: 2023, operating hours: 487 h, fuel type: diesel, motor manufacturer: D34, Field of application: Construction Empty weight: 1.772 kg Generator capacity: 60 kVA Dimensions of cargo space: 242 x 101 x 182 cm Dedpfxsznhncj Aifsck Frequency: 50 Voltage: 230 Water tank volume: 285 l Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.