Used Icm Et 65 for sale (14,455)

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 Fgodpfxjxva Udo Ahdsh New: No GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 | 12 MM 200 EURO| 6 MM 125 EURO|3 MM 100 EURO| INCL VELG.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Fsdpfxoxvbaus Ahdegh GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 8 MM 150 EURO 6 MM 125 EUR 4/3 MM 100 URO INCL VELG.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No GEBRUIKTE OPLEGGER BANDEN 425/65 R 22.5 4/6 MM PROFIEL 100 EURO P STUK VOOR LANDBOUW OF TRANSPORT. Fgedpexvbc Njfx Ahdoh

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Fgjdpfox Di Rqox Ahdjh Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital output, electronic block, decentralized peripheral device -Manufacturer: Siemens, SIMATIC S7, Distributed I/O device from vertical lathe Scherer VDZ 80 DS -Type: ET 200L 6ES7 132-1BL00-0XB0 -Additional terminal: 6ES7 193-1FL30-0XA0 -Number: 4x module available -Price: per piece -Dimensions each: 190/135/H75 mm Fgsdpfxsxphu Ss Ahdsh -Weight: 0.8 kg/piece

Condition: used, Year of construction: 2011, Technical details: Fsdpfsyz Sdqsx Ahdsgh weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. * Fsdpfeyzyudjx Ahdsgh

Condition: good (used), Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete Fgodpfxswb Aknj Ahdeh -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 10,539 h, load capacity: 4,000 kg, lifting height: 6,500 mm, fuel type: gas, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,315 mm, fork length: 1,600 mm, empty load weight: 7,550 kg, total length: 4,120 mm, drive type: Treibgas, construction width: 2,400 mm, Sideloader Load center of gravity: 800 Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Fjdsv U Erpjpfx Ahdegh Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this HX40/16/65. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Heating, full cab, Olatform height: 850 mm

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 4 TRAILERBANDEN 8,9 EN 12 MM PROFIEL DIEPTE. Fgjdex Ahf Ropfx Ahdsh

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Fgedpfxsx Ah Ews Ahdsh

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 32 kg, total width: 490 mm, total length: 575 mm, total height: 880 mm, type of input current: DC, tank capacity: 60 l, warranty duration: 24 months, We offer for sale a Universal Vacuum Cleaner Karcher NT 65/2 Tact2 Condition of the machine – Perfect, brand new unit Year of manufacture – 2024 Fgedpfox Aux Rsx Ahdsh Vacuum cleaner with TACT² system. Designed for removal of hazardous class M dust. Meets the highest European safety standards. Technical Specifications - Power supply parameters: 1 / 220–240 / 50–60 Ph / V / Hz - Airflow: 2 x 74 l/s - Vacuum: 254 / 25.4 mbar / kPa - Container capacity: 65 l - Container material: Plastic - Max rated power: 2760 W - Nominal diameter: ID 40 - Power cable length: 10 m - Sound pressure level: 73 dB(A) - Colour: anthracite - Weight without accessories: 24.5 kg - Weight with packaging: 31.332 kg - Dimensions (L x W x H): 575 x 490 x 880 mm Scope of Delivery - Drain hose (oil-resistant) - Automatic shut-off at maximum collected liquid level - Antistatic system - Metal suction tube, 2 x 550 mm - Filter cleaning, Automatic Tact² Filter Cleaning System - Flat pleated filter, cellulose fibre material - Crevice nozzle - Electrically conductive elbow - Universal floor nozzle width: 360 mm - Bumper bar - Push handle - Swivel castor with brake - Safety class: I - Electrically conductive suction hose, 4 m The vacuum cleaner is equipped with an antistatic system with grounding of suction nozzles, tubes, hose, and elbow to discharge electrostatic charges that may occur when vacuuming very fine dust. It can operate with suction hoses of 40 mm and 60 mm diameter. It is ideal for the automotive and construction industries as well as general industrial applications. Two turbines ensure high suction power. Each is equipped with the TACT system, allowing the vacuum to remove up to 1000 kg of fine dust (class A) using a single filter. The flat pleated Eco filter is suitable for collecting very fine class M dust as well as liquids. Its design offers a large filtration surface while maintaining compact overall dimensions. The TACT2 automatic filter cleaning system alternately shakes half of the filter every 7 seconds, effectively preventing reductions in suction power during operation. Included is a drain hose, which facilitates emptying water directly into a floor drain. The vacuum cleaner has a 65-litre plastic container.

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Width 65 mm -Lengths: 1x 4000/3190/2000 mm each Fgodjwmq H Uopfx Ahdoh -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 4000/230/H80 mm -Weight: 85 kg

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 5,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Diesel, Sideload forklift Mast type: Triplex Condition: Ready for operation and fully functional Fedsyhilkopfx Ahdegh Technical condition: good

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Fgedpfeymmgijx Ahdoh Includes heating Emergency stop cable The machine has been repainted at some point

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Model: MGL2D This blow molding machine is fully functional. Fsdexxp Tbspfx Ahdogh It is still in production and can be inspected by appointment. Videos can be provided upon request. PRICE REDUCTION!!! From 21,000 to 19,000 EUR!

Condition: used, Charger Fgsdpfx Aheyvcmwjdsh

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW Fgjdjy Ralnjpfx Ahdeh weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK .: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm Fgjdpfsv D Nvdox Ahdjh -Total weight: 27 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,700 h, DMG vertical machining center Model DMC 65 V Year : 2002 X - Y - Z travel : 650 - 500 - 500 mm. Fgedpjxqch Aefx Ahdeh RPM : 18000 Tool change : 30 pcs. Spindle taper : ISO 40 Control : MILL PLUS Syncronspindle Hand wheel for axes travel Interface RS-232 C Coolant

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Fgsdpfx Aezr Nmbehdjh Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, number of axes: 3, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons Fsdpfx Aozwk Spohdjgh

Condition: new, Year of construction: 2020, functionality: fully functional, final pressure: 10 bar, input voltage: 400 V, Nominal diameter DN 65 Fsdsrq Ey Iopfx Ahdsgh Delivery head H max. 34 m Operating pressure max. 10 bar Supply voltage 3x400 V Frequency 50 Hz Rated current 13.2 A Motor protection WSK

Condition: refurbished (used), Hydraulic pump, Sperry Vickers Type: GPA2-10-E-30-R-GE 334 with attachment, gear motor coupling, Leroy-Somer Fgodped Szm Tjfx Ahdeh from Kupplungstechnik

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Fgjdotva Sgepfx Ahdoh Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h