Used Barford Sxr 7000 for sale (1,124)

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Dljdpfx Ajvtn Hmedusa Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: good (used), 70 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 3 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 9.490,-- net ex stock Offer consists of: + 71 pcs. uprights or frames, 3 m galvanized +350 pcs. Shelves, 200 kg load/shelf, galvanized 5 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Dljdpfxeh Et Twj Aduoa Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), 30 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 2,1 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 3.250,-- net ex stock Offer consists of: + 31 pcs. uprights or frames, 2,1 m galvanized +120 pcs. Shelves, 200 kg load/shelf, galvanized 4 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. Dodpfx Adsh Eulkoujla To get to our site, please click on our logo!

Condition: new, GMN HSP150DH 381 12 kW 350Hz 7000rpm 400V - Mapal HF spindle / high-frequency spindle HF LBD SN: 378201, unused in opened original packaging, 100% functional. Delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Dljdpfxjx Dwp Io Aduoa

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Dodpfxsx A Dplj Adusla Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: used, Year of construction: 2021, MTE FBF-S7000 cross-slide milling machine: Control: HDH TNC640 HSCI Travel: X- 7,000 mm Y- 1.300 mm Z- 1.500 mm Clamping surface: Length: 6000 mm Width: 1100 mm Height: 850 mm Automatic milling head: Dedpfsx Dzadox Aduola diagonal (swiveling in 2 levels) Speed range: 0-5000 RPM 5000-6000 RPM Swivel positions: 0.001° x 0.001° 360.000 diagonal and vertical joint positions Tool holder: ISO50 Main spindle drive water-cooled Speed regulation: stepless Spindle speed: 20 - 6000 rpm Tool changer: 80 positions Increased coolant pressure (IKZ) to 70 bar chip conveyor Further data available on request!

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Dsdpjvta Rkofx Adujla Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: new, sheet thickness: max. 30 (bei 280 MPa) / max. 22 (bei 360 MPa)total power requirements: 124weight approx.: 54000messurements (LxWxH): 8000 x 2300 x 4700CAPACITYMax. thickness (280 MPa) mm 30 Max. thickness (360 MPa) mm 22 Max. flat plate diameter mm 7000 Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional manual   device) (ØD) mm 1200 Flanging (knuckle) radius (r) mm 120-850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 SIZELength mm 8000 Width mm 2300 Height mm 4700 Weight (Approx.) Ton 54    QUOTATION SCOPE OF SUPPLY & PRICING FMB 30x7000 FLANGING MACHINE Special steel and heat treated (one) knuckle roll – R100 mm Special steel and heat treated (one) flanging roll Hydraulic bottom support rollers adjustable in height Dsdsx Dfmhjpfx Adusla Manual centralized auto-lubrication Control panel placed on the body Hydraulic (air) oil cooler Variable speed of rotation Automatic flanging feature (called CNC/NC by other manufacturers) Lightning for flanging area Telescopic and stainless protection cover sheet for bottom head holder channel Top and bottom head holders driven by hydro-motors Rear lifting cylinder Roll changing device

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Dlodexzug Sjpfx Aduoa Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: ready for operation (used), Rexroth / Indramat MAC090B-0-PG-2LF/130-A-0/S003 Permanent magnet motor SN:MAC090-70004 ,used, strong signs of wear, 100% functional, scope of delivery as per photos Dedpfxju Tm Haj Aduela

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: SMC, Valve manifold SX7000 / SY7000 -Solenoid valves: SY7120-5YOE-02F-Q 7 pieces -Individual components: see photos -Price/Fee: complete -Dimensions: 270/120/H90 mm -Weight: 1.7 kg Dsdpfxoxx Nazs Aduola

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 5,606 h, load capacity: 7,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,600 mm, fork length: 1,250 mm, fork width: 2,000 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 400X60-15, overall weight: 19,500 kg, empty load weight: 12,500 kg, total height: 2,650 mm, total length: 2,450 mm, total width: 2,800 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, retractable fork, sideshift, COMBILIFT C7000 – 2020 – 5606 HOURS – DIESEL – DUPLEX 4600 mm – FORK POSITIONER – CONDITION 5/5 Used & New Forklifts with Certified Quality – FT LOGISTICS ⚙️📦 Ready for operation. No compromises. This COMBILIFT C7000 is more than just a machine – it stands for reliability, efficiency, and durability in every shift. Fully serviced and visually refurbished, it is as good as new and ready for immediate work. 🚀 Key Technical Specifications: 📅 Year of manufacture: 2020 ⏱️ Operating hours: 5606 🔥 Drive: Diesel Dodpfxex Ehr No Aduela 💪 Capacity: 7000 kg 🏗️ Mast: Duplex – 4600 mm 🔧 Fork positioner: 1600 mm | Forks: 1250 mm 🛞 Tyres: Superelastic (100%) ✔️ Technical condition: 5/5 – fully serviced ✨ Visual condition: refurbished, no corrosion 📏 Height: 2650 mm | Length: 2450 mm | Width: 2800 mm 📐 Overall height: 3400 mm 🛞 Tyres: Front 23 x 10 – 12 | Rear 400 x 60 – 15 ❄️ Fully enclosed, heated cabin Ideal for: Warehouses with narrow aisles 🏬 Wood, steel and pipe industry 🪵🔩 Long-load handling 🚛 Indoor & outdoor operations 🌦️ FT LOGISTICS – Quality you can rely on. Service you can trust. ✔️🤝

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Kohler KDW1003, General information Field of application: Construction Weights Empty weight: 390 kg Functional Generator capacity: 9 kVA CE mark: yes Other information Fuel consumption: 1.9 Liter / Hour at 75% Load Generator: Kohler KH00260T04N Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 50 l Transport dimensions (LxWxH): 1,482x0,76x1,03 Dledporl Hywjfx Adusa Production country: FR Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Please note that from 2023 onwards, the canopies will be beige instead of blue. See the datasheet for the new color.

Condition: used, Field of application: Mining Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. Djdsx Dh S Hspfx Adusla The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly.

Year of construction: 2013, condition: excellent (used), Type: BF7000 Serial number: 2022 Year of construction: 2013 Dedpsqvnn Defx Aduola Capacity: 7000 kg/24h Drum speed: 6.2 RPM Refrigerant: TYFOXIT F50 brine Power: 3 x 400V, 50Hz, 2.5kW Dimensions: 2400 x 900 x 1600 mm Weight: 325 kg With UV filter

Condition: new, Bosch SF-A2.0013 servo motor SN:87000001, unused in original packaging, 100% functional, scope of delivery as per photos Dlodpji D Hfzsfx Aduea

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil Djdpfxju N Sibj Aduela -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 5,606 h, load capacity: 7,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,600 mm, fork length: 1,250 mm, fork width: 2,000 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 400X60-15, overall weight: 19,500 kg, empty load weight: 12,500 kg, total height: 2,650 mm, total length: 2,450 mm, total width: 2,800 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, retractable fork, sideshift, COMBILIFT C7000 – 2020 – 5606 HOURS – DIESEL – DUPLEX 4600 mm – FORK POSITIONER – CONDITION 5/5 Used & New Forklifts with Certified Quality – FT LOGISTICS ⚙️📦 Ready for operation. No compromises. This COMBILIFT C7000 is more than just a machine – it stands for reliability, efficiency, and durability in every shift. Fully serviced and visually refurbished, it is as good as new and ready for immediate work. 🚀 Key Technical Specifications: Djdpjx Earzjfx Adujla 📅 Year of manufacture: 2020 ⏱️ Operating hours: 5606 🔥 Drive: Diesel 💪 Capacity: 7000 kg 🏗️ Mast: Duplex – 4600 mm 🔧 Fork positioner: 1600 mm | Forks: 1250 mm 🛞 Tyres: Superelastic (100%) ✔️ Technical condition: 5/5 – fully serviced ✨ Visual condition: refurbished, no corrosion 📏 Height: 2650 mm | Length: 2450 mm | Width: 2800 mm 📐 Overall height: 3400 mm 🛞 Tyres: Front 23 x 10 – 12 | Rear 400 x 60 – 15 ❄️ Fully enclosed, heated cabin Ideal for: Warehouses with narrow aisles 🏬 Wood, steel and pipe industry 🪵🔩 Long-load handling 🚛 Indoor & outdoor operations 🌦️ FT LOGISTICS – Quality you can rely on. Service you can trust. ✔️🤝

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Dledpsxdnraefx Aduea Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: like new (used), mileage: 67,000 km, power: 95.61 kW (129.99 HP), fuel type: diesel, emission class: euro6, Year of construction: 2019, CITROEN JUMPER, year 2019, 2.2 engine with 130 HP, 67,000 km, L2H2, total length 5.40 m, air conditioning, factory stereo, steering wheel controls, single owner, fully serviced, 1-year warranty, financing available. Dsdpfx Adsxyw Hfouela

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. Dedsuzylhjpfx Adusla • Year of manufacture: 05/2013 • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: ready for operation (used), Marposs 6307000701 stepper motor control, used, normal signs of use, 100% functional Djdpfei Eb Axsx Adujla

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Dledpoht Hgnjfx Aduoa

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 5,606 h, load capacity: 7,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,600 mm, fork length: 1,250 mm, fork width: 2,000 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 400X60-15, overall weight: 19,500 kg, empty load weight: 12,500 kg, total height: 2,650 mm, total length: 2,450 mm, total width: 2,800 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, retractable fork, sideshift, COMBILIFT C7000 – 2020 – 5606 HOURS – DIESEL – DUPLEX 4600 mm – FORK POSITIONER – CONDITION 5/5 Used & New Forklifts with Certified Quality – FT LOGISTICS ⚙️📦 Dedpfjx Drxkex Aduola Ready for operation. No compromises. This COMBILIFT C7000 is more than just a machine – it stands for reliability, efficiency, and durability in every shift. Fully serviced and visually refurbished, it is as good as new and ready for immediate work. 🚀 Key Technical Specifications: 📅 Year of manufacture: 2020 ⏱️ Operating hours: 5606 🔥 Drive: Diesel 💪 Capacity: 7000 kg 🏗️ Mast: Duplex – 4600 mm 🔧 Fork positioner: 1600 mm | Forks: 1250 mm 🛞 Tyres: Superelastic (100%) ✔️ Technical condition: 5/5 – fully serviced ✨ Visual condition: refurbished, no corrosion 📏 Height: 2650 mm | Length: 2450 mm | Width: 2800 mm 📐 Overall height: 3400 mm 🛞 Tyres: Front 23 x 10 – 12 | Rear 400 x 60 – 15 ❄️ Fully enclosed, heated cabin Ideal for: Warehouses with narrow aisles 🏬 Wood, steel and pipe industry 🪵🔩 Long-load handling 🚛 Indoor & outdoor operations 🌦️ FT LOGISTICS – Quality you can rely on. Service you can trust. ✔️🤝

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C-13-309-02, input voltage: 400 V, overall weight: 900 kg, Take the opportunity to purchase a high-quality used Carat grinding & polishing station: This set consists of a control cabinet and two precision polishing machines, equipped with robot connection for maximum efficiency. Ideal for professional applications in the industry. Matching robots can be offered separately. Year of construction: 05.2013 Total height: 240 cm Air pressure: max. 6 bar Rated current: 11.5 A Rated power: 5.5 kW Dodeuzyctepfx Adusla Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet