Used Gesan Dvs 410 for sale (1,895)

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 410 mm, turning length: 100 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,320 mm, bed width: 250 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, overall weight: 1,550 kg, Technical data Turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in gap: 580 mm Turning length in gap: 190 mm Distance between centers: 1000 / 1500 / 2000 mm Bed: induction hardened Bed width: 250 mm Spindle bore: 52 mm Spindle nose: D1-6 Spindle taper: Morse taper No. 6 Spindle speed range: (16) 45 – 1800 rpm Maximum tool size: 20 x 20 mm Longitudinal feed range: (17) 0.05 – 1.7 mm/rev Cross feed range: (17) 0.025 – 0.85 mm/rev Metric threads: (42) 0.2 – 14 mm Inch threads: (45) 2 – 72 T.P.I Module threads: 0.3 – 3.5 M.P. Diametral pitch threads: 8 – 44 D.P. Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm Godpfx Ahoytnznjdebu Tailstock taper: MT4 Digital readout: 3-axis DRO Coolant pump power: 0.1 kW Overall dimensions (L x W x H): 1940 x 850 x 1320 mm Motor power: 3.3 kW Weight: 1550 kg Equipment 3-jaw chuck 200 mm 4-jaw chuck 250 mm Faceplate 250 mm Driving plate 350 mm Steady rest Follow rest Spindle reduction sleeve Dead center Coolant system Halogen work light Thread dial indicator Tool kit Sales conditions The machine is brand new. 12-month warranty Warranty service Post-warranty service Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: good (used), Year of construction: 2015, Logopak 410 IIIF Labeller Serial: LP10021552 Gjdpfx Aowtqtushdsbu Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,

Condition: good (used), mileage: 650,302 km, power: 302 kW (410.61 HP), first registration: 12/2014, fuel type: diesel, empty load weight: 9,400 kg, maximum load weight: 8,600 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,410 mm, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,650 mm, total width: 2,550 mm, total height: 3,300 mm, number of cylinders: 6, displacement volume: 12,902 cm³, nominal power: 302 kW (410.61 HP), Equipment: ABS, EBS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), parking heater, seat heater, tail-lift, trailer coupling, Key Features Internal Reference: 25325M Chassis Number: XLR AEH 430 0G0 395 90 Serial Number: 678.329.526 Vehicle Model: XF 410 WB LBW AHK Vehicle Make: DAF Product Category: Interchangeable Body System Condition: Used Mileage: 650302 Emission Standard: Euro 6 Date of First Registration: 02.12.2014 Last Inspection (MFK or TÜV): 04.12.2023 Fuel Type: Diesel Overall Vehicle Condition: Good Engine Displacement (ccm): 12902 Engine Power: 410 Transmission Type: Fully Automatic Cylinders: 6 Suspension: Air-Air Gedsz Hp Swopfx Ahdebu Cab Vehicle Equipment: ABS, Trailer Coupling, CD Player, Differential Lock, EBS, Electric Windows, ESP, Radio, Seat Heating, Auxiliary Heater, Cruise Control, Central Locking Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 4x2 Axle 1: 385 / 55 R 22.5/7mm, Disc Brakes, Air Suspension Axle 2: 315 / 70 R 22.5/8mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight (GVW): 18000 Gross Train Weight (GTW): 32000 Payload: 8600 Unladen Weight: 9400 Vehicle Wheelbase: 5410 Vehicle Height: 3300 Vehicle Length: 9650 Vehicle Width: 2550 Lift System Lift System Brand: DAUTEL Lift System Platform Length: 1600 Lift System Payload: 1500 Lift System Year: 2014

Condition: good (used), Year of construction: 1997, functionality: fully functional, Technical Offer – Gallus EM 410 S Manufacturer: Gallus Ferd. Rüesch AG / Arsoma Druckmaschinen GmbH Model: Gallus EM 410 S Year: 1997 Incoterm: FCA FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is interesting The Gallus EM 410 S is one of the most successful servo-driven UV flexographic presses ever built for the narrow web label industry. Thanks to its modular design, high production speed, and comprehensive inline converting equipment, it is perfectly suited for self-adhesive labels, flexible packaging, filmic materials, and premium label applications. Gjdpjznwhrofx Ahdsbu Delivered complete with printing cylinders, anilox rolls, and magnetic cylinders, the machine offers an excellent opportunity to start production immediately while significantly reducing tooling investment. _____ Technical Specification • 8 UV Flexographic Printing Units • Web Width: 410 mm • Maximum Printing Width: 410 mm • Mechanical Speed: Up to 150 m/min • Print Repeat: Approx. 254–648 mm (depending on cylinders) • UV Flexo Printing (Front & Reverse) • Servo-Driven Technology • Electrical Supply: 400 V / 50–60 Hz / 3 Phase / 80 A Web Handling • Unwinder for rolls up to 800–1,000 mm • Maximum Unwind Diameter: 1,000–1,250 mm • Double Rewinder • Maximum Rewind Diameter: 800–1,250 mm • Automatic Electronic Web Guide (E&L or equivalent) Drying & Finishing • IST Metz UV Drying System • Corona Treatment • Teknek Web Cleaning System • Turnbar System • 2 Rotary Die-Cutting Stations with GapMaster • Inline Laminating Unit Quality Control • SES SensoTec Register Control System • Register Accuracy: ±0.1 mm • OkiSystem Sentinel Defect Detection System Printable Materials • Paper • PE Films • PP Films • PET Films • Self-Adhesive Materials • Lightweight Carton _____ Included Equipment • Complete set of Printing Cylinders • Complete set of Anilox Rolls • Magnetic Cylinders • Automatic Web Guide • Turnbar • Corona Treater • Teknek Web Cleaner • 2 × Rotary Die-Cutting Stations with GapMaster • Inline Laminating • IST Metz Multi-Lamp UV System • Double Rewinder • Register Control • Defect Detection System _____ Main Advantages • Proven Gallus servo-driven technology • High production speed up to 150 m/min • Complete inline converting configuration • Extensive tooling package included • Modular platform compatible with Gallus EM 260 / EM 410 / EM 510 • Ready for immediate production with minimal additional investment _____ The machine can be inspected while running. Should you require further information, additional photographs, or wish to arrange an inspection, please do not hesitate to contact us. We look forward to hearing from you.

Condition: used, This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Autosampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price. Gbjdpfjxzh Amex Ahdju

Condition: used, mileage: 323,000 km, power: 375 kW (509.86 HP), first registration: 12/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, all wheel drive, parking heater, Manufacturer Mercedes Model Actros 4151 V8 8x8 Hvidtved Larsen RECycler 410 Year 2013 Condition Very good Serial Number WDB9323361L766653 Ref. nr. 658088 Reg. date: 10-12-2013 Last seen: 11-11-2025 Engine: V8 Hk: 510 Km: 323000 Gearbox: EPS 3 Pedal Automatic Eurotype: 5 Diesel tank: 1 Tank liter: 450 Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Plushing: ? Radio: ? Drum brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 315/80 Cover% left 80 - 80 - 40 - 40% Front suspension: Springs Suspension rear: Springs Rear axle, hub reduction: ? Toolbox: ? Hydraulic system: ? Total weight: 32000 kg. Net weight: 24300 kg. Load capacity 7700 kg. Manufacturer: Whitehead Larsen Gedoyvx Dajpfx Ahdjbu Tank capacity: 10.500 l. High pressure pump: Uraca KD718 High pressure capacity: 333 l/min 170 bar. High pressure pump hours: 1737 Vacuum pump: CVS Vacustar 1600 Vacuum capacity: 26,667 l/min. Vacuum pump timer: 2744 Vogelsang pump: 274 Remote control: ? Water heater: ?

Condition: used, mileage: 300,000 km, power: 302 kW (410.61 HP), first registration: 12/2011, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, Iveco Trakker 410 First registered: 12/2011 312,000 km 6x4 Godpfezw Sr Rjx Ahdsbu Leaf/Leaf - full steel suspension Manual transmission Retarder Euro 5 German truck Palift/Palfinger hooklift ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…?…?… Roman We will gladly take care of your financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation - Transfer to Munich Airport or Passau train station

Condition: used, mileage: 300,000 km, power: 302 kW (410.61 HP), first registration: 12/2011, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, Iveco Trakker 410 First registered: 12/2011 312,000 km 6x4 Leaf/Leaf - full steel suspension Manual transmission Retarder Euro 5 German truck Palift/Palfinger hooklift Gbedpfx Aezw Stbehdeu ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…?…?… Roman We will gladly take care of your financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation - Transfer to Munich Airport or Passau train station

Condition: excellent (used), Year of construction: 2004, Gallus EMS 410, 2004 Unwind unit E L electronic web guide Arcotec Corona Treatment unit 7 servo-driven flexo print stations 7 IST UV dryers 7 servo-driven water-cooled chill rolls rail system delam/relam rotary die station with K&B Gapmaster Matrix rewind Magnetic die crane und hoist BST video control Sensotec automatic register control Exit die with nip Rewind touch screen control panel 21 anilox rollers 9 magnetic cylinders 84 print sleeves Tooling: 12x7 Printing cylinders: 89; 96; 102; 104; 106; 108; 116; 117; 121; 168; 9x Magnetic Cylinders: 89; 96; 102; 104; 108; 112; 116; 117; 120. 1x rubber roller for varnishing. 21x Anilox rollers Good working condition Gbodov E Rizjpfx Ahdju In production, can be inspected at any time

Condition: excellent (used), CATALOGUE NUMBER 7610 Technical data: - inlet width 410mm - inlet height 140mm - roller width 430mm - roller diameter 400mm - number of knives 2 pcs - screen dimensions 80x130mm - top roller, grooved - bottom 2 rollers, grooved - feed belt length 2850mm - feed belt width 390mm - auto-reverse - main motor 30kW - feed motor 2 x 2.2kW - machine dimensions (L/W/H) 4800x1550x1200mm - weight approximately 2200kg ADVANTAGES - Made in Poland - Auto-reverse - With feed conveyor - DTR documentation - Used shredder, very good condition Net price: 75900 PLN Net price: 17651 EUR Gsdsztq Uvepfx Ahdobu Net price calculated using the exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), mileage: 297,725 km, power: 300 kW (407.89 HP), first registration: 09/2020, fuel type: diesel, tire size: 385/55/22.5, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 750 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,400 kg, loading space length: 6,850 mm, loading space width: 2,470 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, power mirror, soot filter, = Additional options and accessories = - Aluminum fuel tank - Speed limiter - Air suspension - Particulate filter - Reversing camera - Sleeper cab - Sideskirts - Toolbox - PTO (Power Take-Off) - Central lubrication system = Additional information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Transmission: AMT, 12 gears, automatic Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/55/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf suspension Rear axle 1: Tire size: 315/70/22.5; Twin tires; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 315/70/22.5; Lift axle; Max. axle load: 7,400 kg; Suspension: air suspension Weights Empty weight: 12,969 kg Payload: 13,031 kg Gross vehicle weight (GVW): 26,000 kg Functional Loading platform height: 130 cm Condition Technical condition: very good Visual condition: very good DAF CF 410 6X2 M4SN3 MACHINE TRANSPORTER WITH SLIDING PLATFORM EURO 6 L PACKAGE 410 HP DRIVE: 6X2, LAST AXLE IS A LIFT AND STEERABLE AXLE WHEELBASE: 480 CM STEEL/AIR SUSPENSION DIFFERENTIAL LOCK SLEEPER CAB WITH AIR CONDITIONING RADIO/CD PLAYER WITH NAVIGATION REVERSING CAMERA AUTOMATED TRANSMISSION WITH ENGINE BRAKE BEACON LOADING PLATFORM LENGTH: 685 CM PLATFORM HEIGHT: ± 130 CM REMOTE CONTROLLED WINCH TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO WATCH VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL Gedpfxjwid U Dj Ahdsbu

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME Godszc E A Ispfx Ahdsbu CE MARK

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Gbodpfx Ahsw El Nhjdju

Condition: good (used), mileage: 450,000 km, power: 302 kW (410.61 HP), first registration: 02/2008, fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2008, Equipment: ABS, AdBlue, air conditioning, differential lock, power assisted steering, = Additional options and accessories = - Aluminum fuel tank - Leaf spring suspension - Power Take-Off (PTO) = Additional information = Front axle 1: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Front axle 2: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Differential lock; Tire tread depth left (inner): 30%; Tire tread depth left (outer): 30%; Tire tread depth right (inner): 30%; Tire tread depth right (outer): 30% Rear axle 2: Dual tires; Differential lock; Tire tread depth left (inner): 30%; Tire tread depth left (outer): 30%; Tire tread depth right (inner): 30%; Tire tread depth right (outer): 30% GVWR: 32,000 kg Technical condition: good Gbodjz Hyrbepfx Ahdsu Optical condition: good

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Gjdpfxsw Hf T Ns Ahdsbu

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,565 h, load capacity: 1,000 kg, load center: 600 mm, fuel type: electric, power: 6.9 kW (9.38 HP), battery capacity: 750 Ah, battery voltage: 48 V, battery weight: 960 kg, fork length: 1,000 mm, tire condition: 99 %, overall weight: 4,897 kg, Equipment: head guard, pallet forks, We offer this used Jungheinrich EKX 410 narrow aisle forklift, manufactured in 2015. Type: EKX 410 Serial number: FN487296 Rated capacity: 1000 kg Battery voltage: 48 V Forklift weight without battery: 4897 kg Option: G+I 120 650 DZ Year of manufacture: 2015 Center of gravity distance: 600 mm Rated power: 6.9 kW Battery weight min/max: 960 / 1062 kg If you have any further questions or require more information, please do not hesitate to send us a message or call us. Gbodpfxoz An Npe Ahdou

Condition: good (used), mileage: 660,892 km, power: 302 kW (410.61 HP), first registration: 04/2014, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 5,200 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, central locking, cruise control, onboard computer, Volvo FM 410 Globetrotter 6x2*4 - Livestock transport - Euro 6 - Steering rear axle Mileage: 660892 km Year of manufacture: 2014 Euro 6 compliant Steering rear axle Designed for livestock transport Gsdpezikbnjfx Ahdjbu = Further information = Transmission: i-Shift, automatic Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steerable; Tire tread depth left: 40% Rear axle 1: Tire size: 315/80R22.5; Double tires; Max. axle load: 11500 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 7500 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Number of cylinders: 6 GVWR: 27,000 kg Technical condition: good Optical condition: good

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, grinding diameter: 299 mm, New arrival 1 Hydraulic Universal External and Internal Cylindrical Grinding Machine TSCHUDIN HTG 410 U – Year 1988, partial overhaul in 2026 – 150 mm center height x 480 mm center distance – workpiece spindle head MK 5 with stepless speed adjustment. Grinding wheel left and right – swiveling internal grinding attachment with 18,000 RPM Machine equipped with four-axis digital readout – X-axis – Y-axis and rotary encoder with one-micron resolution when swiveling the universal grinding spindle head and workpiece spindle head! Pneumatic air cushion lifting for effortless swiveling of workpiece spindle head and grinding spindle head. Machine includes four-jaw chuck, halogen lamp, paper band filter, folding dresser, and balancing arbor. Guideways in X-axis newly scraped – machine thoroughly inspected by specialist. Gjdovdumbopfx Ahdebu Automatic cycle with "rapid traverse to automatic infeed – dwell time – retraction – infeed dimension remains set". Very little used machine from prototype manufacturing! Price on request (Domestic sales plus 19% VAT.) Technical data not binding – subject to prior sale and errors. Best regards, INDUBA GmbH Mathias Becker D-78628 Rottweil

Condition: used, Year of construction: 2011, Printing & Processing Units: - 5 x EXL offset printing units (single) - 1 x Flexo printing unit (single) Gsdpfxsy Rp E Ds Ahdobu - 1 x EC printing unit on rail - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Condition: good (used), mileage: 818,766 km, power: 300 kW (407.89 HP), first registration: 08/2019, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, soot filter, spoiler, General information Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF Traxon, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.165 kg Carrying capacity: 12.335 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 Godpez Hu Rlsfx Ahdobu Environment Emission class: Euro 6d History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - Toolbox - Visor - Webasto

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Gjdevwfxzspfx Ahdobu

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Gbjdpfjxtu H Nox Ahdeu Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, functionality: fully functional, input voltage: 400 V, Application of a spiral shaft with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional knife shaft. A key advantage of carbide inserts is the ability to replace or rotate individual knives in the event of damage, significantly reducing operating costs. Carbide-tipped blades enable chip-free planing and optimal smoothness on any type of wood. Perfectly even thickness planing ensured by the centrally guided column table with central support. Processing accuracy of 0.1 mm, adjustable via a digital indicator on the handwheel. High working comfort due to the noise-reducing guard. Precision-ground thicknessing table for workpieces up to 230 mm in height. Standard equipment includes table extension with integrated rollers. Chain drive ensures precise feed of the workpiece. Numerous safety features: no-voltage release switch, limit switches to prevent unintentional activation, emergency stop switch. Godpfoytc Susx Ahdsbu Technical specification Thickness planing width: 410 mm Material height clearance (min.): 5 mm Material height clearance (max.): 230 mm Table size (width): 930 mm Table size (depth): 410 mm Maximum chip removal in thicknesser: 5 mm Minimum planing length: 150 mm Cutterblock diameter: 95 mm Number of knives/inserts on cutterblock: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port diameter: 100 mm Motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Dimensions (width): 1110 mm Dimensions (depth): 710 mm Dimensions (height): 1020 mm Weight approx.: 239 kg Scope of delivery Spiral cutter head with 72 TCT knives Spare TCT knives (5 pcs) Digital thickness table height indicator Table extension with rollers

Condition: used, mileage: 654,000 km, power: 302 kW (410.61 HP), first registration: 10/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 5,050 mm, loading space width: 1,400 mm, loading space height: 1,250 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, RENAULT PREMIUM 410 Hooksystem + CRANE + REMOTE CONTROL / 6x2 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 654 000 km EQUIPMENT: ? ABS ? ASR ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH LOADING SPACE: x 140 cm PLATFORM HEIGHT FROM GROUND: 125 cm CAPACITY: 14 000 kg Gsdjzn Ev Rjpfx Ahdsbu TOTAL WEIGHT: 26 000 kg WHEELBASE: 500 / 133 cm TIRE SIZE: 1st Axle: 385/65R22,5 2ns and 3rd Axle: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: EPSILON E140Z79 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 0770

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) Gsdpov Rppkjfx Ahdsbu >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.