Used Valtra/Valmet 6550 Hi-Tech for sale (140,627)

Condition: good (used), Code: 0085 Brand: BIESSE ARTECH - ITALY Model: SINGLE - CE Standard Edgebander for straight and shaped panels with glue pot with automatic feed for edges in wood, pvc, abs, veneer, for furniture, kitchens, panels, joinery, custom-made furniture - CE Standard Technical data Panel height from mm 10 to 60 Edge thickness mm 0,4 - 3 Minimum radius mm 25 Feed speed from 4 to 16 mt/min Glue pot capacity approx 3 litres Motorised feed at variable speed mt/min 4/18 End cutting blade unit for cutting excess edge lengths Tilting table Telescopic support roller conveyor for supporting large panels Compressed air 6 bar Total power consumption Kw 5,2 Overall dimensions mm 1700 x 900 x 1500 h Weight kg 350 Dwodpowut Tgofx Adujf Top/bottom trimmer Speedy Panel height mm 10/60 Absorbed power Kw 1,5 Compressed air 6 bar Overall dimensions mm 900 x 750 x 1150 h Weight kg 10

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Dwodpswv Nq Rofx Adujf Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner Dedsf Ak N Ropfx Aduswf - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Condition: refurbished (used), Thieme / Tesmoa UV screen printing tunnel (1 lamp), fully refurbished. Djdpsxk T Hcsfx Aduswf Belt width: 700 mm Year: 2003 Sartech is a company specializing in screen printing, automation, and robotics solutions, and manufactures UV (electronic) or hot air curing tunnels.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, load capacity: 8,000 kg, For sale is a Pfeifer turning table that has seen very little use. The machine is somewhat dirty due to long-term storage but is otherwise in very good condition. Dwodpfx Aexdzunsduof Gentle – The turning process starts and finishes slowly via frequency converter, ensuring smooth handling and minimizing turnaround time in the middle section through increased speed. Safe – Protection from injury is provided by a solid enclosure or integrated safety edges that automatically stop the turning process in case of a pinch or crush hazard. Acoustic and visual warning signals ensure safety when the turning process begins. Mobile – Thanks to forklift pockets, the turning table can be transported to various locations. A simple 400V power outlet is sufficient to operate the table using the included supply cable. Flexible with various table tops – For coils: table top with a cut-out for easy loading and unloading using a coil hook and prism support. For injection moulding tools: both table tops are without cut-outs. For sensitive loads, the table top or prism is PU-coated. Modular – The INVERTO can be configured as needed thanks to exchangeable and retrofittable table tops. Teach-in function – The turning angle can be individually set and saved. Even more flexibility – 180° rotating unit allows loading and unloading from the same side.

Year of construction: 2025, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Dodjb Rz R Uopfx Aduswf Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: used, portable oxygen breathing apparatus for tunneling -for: Herrenkecht tunnel boring machine -System-No: 009-07-06 -in: 2x aluminum case Djdpfeb A Ibzex Aduewf -div. Hoses -Transport weight: 100 kg

Condition: used, Year of construction: 2017, Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request Dedpfx Adel Hx Nrsuswf

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range. Dedpfxoucdqnj Aduowf

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 52A2MXTE5269, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution Djdpew Id Hvofx Adujwf MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO system Infinitely variable spindle speeds Infinitely variable longitudinal power feed & rapid to table One shot centralised lubrication system Low voltage Halogen Worklight Table guarding Base splash tray Coolant system

Year of construction: 2002, condition: excellent (used), DANTECH / OMEGA ice water cooler for glazing Liter: 700liter. Vessel dimensions: 131x90x60cm. Total goals: Length: 215cm. Dwedpshg Tryefx Adujf Width: 105cm. Height: 270cm.

Year of construction: 2022, condition: new, Machine Type: Extruder - Sheet line Dwsdeh E Dx Ijpfx Aduef Brand: Dupatech Model: HIPS/PP Year: NEW Output (Kg/hr): 250 - 1050 Energy consumption: 0.18 - 0.2 Kwh/Kg.hr Sheet width: 400 mm - 1500 mm Sheet thickness: 0.25 mm - 2.0 mm

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 230 kg, hopper volume: 200 l, Food-grade sack emptying hopper Door with vertical upward opening Transparent plexiglass viewing window EPDM food-grade door gasket Round tube handles Dwjdjw Sddiopfx Adusf Removable grid – thickness 5 mm, mesh 20×20 mm 3 suction pipes Ø60 mm with reduction to Ø50 mm, suction capacity adjustable as specified Connection for level probe G1"1/2 (final third) Constructed entirely in AISI 304, total weight 230 kg, internal polishing

Condition: excellent (used), Year of construction: 2012, Description: Automatic film welding machine with downstream shrink tunnel. Can be used for all products that can be fed via the discharge table, e.g. wood briquettes. The machine is equipped with a conveyor belt to transport the packages through the shrink tunnel. The throughput time through the tunnel can be adjusted depending on the film thickness. The motor drive of the film rolls doses exactly the length of film required for the respective package. Work flow: The briquettes are placed manually on the table in the adjustable discharge frame. The two-hand operation triggers the discharge of the briquettes into the film curtain and the subsequent separation and sealing process. The package, now loosely wrapped in film, is picked up by the conveyor belt of the shrink tunnel and transported through the shrink tunnel. The film fits tightly to the contours of the package. After the now film-wrapped package has left the shrink tunnel, it should be left to cool for a while on an additional roller conveyor (see offer) so that the film hardens. The package can then be placed/stacked on a pallet. Technical data: Semi-automatic briquette band rolling machine with integrated single-chamber shrink tunnel for PE flat films 40-100. - Product feed into the machine via two buttons - Cycle output up to max. 8-10 containers/min. - Both film roll unwinders are motor-driven - Tunnel belt with frequency-controlled adjustable speed and adjustable air flow Djdpfsvzn Hisx Aduswf - Tunnel belt consisting of fiberglass rods with driven central chain, load capacity up to 30 kg. - Automatic tunnel switch-off - 760 mm welding bar - Max. roll size: 750 mm x 350 mm (WxD) - Product sizes: - 20-380 mm, 110-630 mm, 100-410 mm (HxLxW) (not all dimensions can be combined with each other.) - Product weight: 2-30 kg. - Control with 10 storable programs, piece counter, recording of product length - Machine can be moved on wheels and feet - Technical data: 400 V, 17 kW, 32A CEE plug, 6 bar constant, 17.6 NL/container - Machine weight: 600 kg. - Machine dimensions: 2890 mm x 1243 mm x max. 2065 mm (LxWxH) - Cooling fan group - Pressure rollers right and left at the tunnel exit - Light grid at the machine entrance -> one-hand operation

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. Dsdeg Ewwrspfx Aduewf -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52A2MXTE5294, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Dwedewczn Iepfx Adusf Quill feeds 0.04,0.08,0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO system Infinitely variable spindle speeds Infinitely variable longitudinal power feed & rapid to table Table guarding One shot centralised lubrication system Lighting Base splash tray Coolant system

Condition: new, Year of construction: 2025, Sharpening of woodworking tools The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Made in Switzerland Swiss Quality = Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . Dodpfx Aeb Dt Ixsduswf In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: like new (used), Year of construction: 2025, We will overhaul your existing Karstens and Bahmüller brand cylindrical grinding machine. The overhaul for Bahmüller and Karstens cylindrical grinding machines includes the following: 1. Housing/full space paneling new paint in RAL 7035, RAL 7011 new polycarbonate safety screen 10 mm new bearings for workpiece change door 2. Grinding headstock complete cleaning and painting check bearings, grind in plain bearings if necessary, replace if necessary check and clean the lubrication system revise the grinding spindle new coolant hoses, taps and KM nozzles made of aluminum install new belts 3. Tailstock complete cleaning and painting revise the quill check bearings, grind in plain bearings if necessary, replace if necessary disassembly and cleaning of the fine adjustment, replace any defective parts if necessary 4. Workpiece headstock complete cleaning and painting check bearings, replace if necessary check and clean the Lubrication system Revision of the workpiece spindle Install new belts 5. Hydraulics Complete cleaning and painting Storage of the hydraulic motor Revision of the pump, replace if necessary Complete renewal of the hoses Filter replacement Hydraulic plan 6. Pneumatics New maintenance unit New sealing air unit for length measuring systems New pneumatic lines/connectors/distributors and small parts Pneumatic plan 7. Lubrication for spindles Complete cleaning and painting Storage of the lubrication motor Revision of the pump, replace if necessary Check and clean the lubrication system Check and renew the lubrication monitoring if necessary 8. Central lubrication Complete cleaning and painting Storage of the lubrication motor Revision of the pump, replace if necessary Check and clean the lubrication system Check and renew the lubrication monitoring if necessary 9. Machine bed Completely clean inside and out Sand down and repaint V- and re-scrape and measure flat tracks Installation of a new control panel (rotatable) 10. X, Z axis New bearings on the X axis New ball screws New axial bearings Surface grinding, scraping if necessary Revision of the coarse adjustment of the X axis 11. Geometry Grinding and adjusting the complete geometry on the Grinding headstock, workpiece headstock, tailstock, X and Z axis Creation of a geometric protocol 12. Electrical system Construction of a new Rittal control cabinet with Siemens components, contactors, motor protection switches, Finder relays, Siemens drives, NCU, supply, Siemens PLC, etc. if necessary MPM, Jenoptik and other optional control devices Dwedpfxsvrdxis Adusf Creation of a new E-Plan 8 circuit diagram Completely new cabling with PUR cables New control devices, switches, buttons (Siemens, Eaton) 13. CNC control Siemens control SINUMERIK ONE Siemens axis drives and frequency converters with CU Siemens asynchronous motor (grinding spindle) Siemens synchronous motors in X, Z, workpiece spindle 14. Length measuring systems absolute length measuring systems Heidenhain 15. Other CE marking and protocol Risk assessment Siemens Safety with acceptance protocol new operating instructions and supplier documents in paper or digital form Noise protocol VDE protocol Control version also possible with Fanuc 0i TF Plus.

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm Djdpei Hb I Tefx Adujwf · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Condition: used, functionality: fully functional, power: 4.41 kW (6.00 HP), fuel type: gasoline, color: blue, fuel: super 95, Year of construction: 2007, Beach cleaners: - Kässbohrer - Beach Tech Sweepy - Honda GX160 engine (6HP) - Forward and reverse gear, - Sieve with vibrator - Removal container - Smoother - Rear weight - Trench roller height adjustable - Dif. lock - 1st hand 2 pieces available, price per device Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Dwsdpfx Adjv A Uf Isuof Errors and typos possible, subject to prior sale!

Condition: new, Year of construction: 2025, machine/vehicle number: 2025, Wet sharpening machine for Frame Saws Dodpfxjwzaw Se Aduowf

Condition: new, machine/vehicle number: RS600, Year of construction: 2025, We offer a two-shaft shredder RS-600, RS-640, RS-680 by RS TeamTech - Recycling Solutions Designed to shred a wide range of materials. Parameters: Working area: 600x400mm Number of knives on the disc: 1-12 Dial thickness: 10-60mm The size of the processed material: 10-80 Engine power: 22kW WEIGHT: 1480 kg Only with us innovative system for changing the size of the shredded material in the range of 10-80 mm without the use of a sieve. Dwedpshy S Icjfx Adusf Our shredders can be integrated into automated recycling lines that we design and build for individual needs Each of the models is equipped with a Simens controller protecting the device against overload and has additional protection for motors and the function of reversing the shafts. Our technical team is available 24/7 for our clients We produce personalized shredders for individual needs. Ability to run tests. Recommendations on request. Polish production.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10011575, Hello, I´m selling filling pellet machine VAI V5/10S Fully automatic, Made in Italy Low used, fully function in good condition If you´re interested contact me on mail and we can call you Dwjdjwxplmspfx Adujf

Year of construction: 2025, condition: new, We offer a professional chiller cooling unit, designed for effective cooling of laboratory and industrial equipment and other systems requiring precise temperature control. Technical specifications: Model: Techjon Power supply: AC 230V ~ 50Hz Input power: 600 W Cooling capacity: 1780 W Dwedpjwrp Alofx Aduef Refrigerant: R32 Maximum pump pressure: 15 m Net weight: 32 kg Dimensions: 400x380x380mm Connectors: OUT1 / IN1 - cooling circuit OUT2 / IN2 - additional inputs/outputs Alarm and 220V power supply Device features: Modern stainless steel design Intuitive control panel with digital display Built-in fan and water cooling system Reliable operation under continuous load High energy efficiency Mobility - transport wheels and side handles Compact housing - ideal for work in limited spaces Application: Packaging machines Laser device cooling Lines production Industrial machines requiring cooling Precise applications requiring stable temperature: Product available immediately Warranty: 12 months Possibility of issuing a VAT invoice Contact us for more information, photos of the device or to arrange a presentation.

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. Dwjdpedgfgcofx Aduof The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery!