Used Belflex Bf815 Scg-M for sale (27,528)

Condition: ready for operation (used), functionality: fully functional, mileage: 820,250 km, next inspection (TÜV): 08/2025, Year of construction: 1999, fuel type: diesel, gearing type: mechanical, color: grey, suspension: air, number of seats: 2, driver cabin: sleeper cab, brakes: retarder, emission class: euro4, fuel tank capacity: 550 l, Equipment: ABS, crane, cruise control, hydraulics, parking heater, power assisted steering, trailer coupling, truck registration, For sale: Renault HR 385-27MJ ZD 381hp with 22T/M1 crane, with remote control, with 4 x support leg (max. 12 m1) Diesel 18-10-1999 first registration MOT inspection on the car until 22-8-2025 Load capacity: 10760kg max. Last service with MOT: 22-8-2024 new brake discs, new brake pads, new clutch with new pressure group, replaced crankshaft seal, PTO pump overhauled, intermediate bridge bearing of drive shaft replaced, new track rod, new steering rod ball(s) + new covers For sale together with trailer Asking price n.o.t.k. Cedpfx Adou I N Ewoujhf

Condition: used, Year of construction: 2006, Description Brand: H&M Type: HM-Z/4 F Year of manufacture: 2006 Feed length: 8500 mm Chsdpfxswzkyqo Aduef Industrial PC. Saw blade diameter: 700 mm Angle adjustment: 0-180º Tilting angle: 0-45º Z-axis adjustment: 200 mm Maximum cutting height: 250 mm Discharge system with pushers

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Cedsw Hhwwepfx Adujhf Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: ready for operation (used), functionality: fully functional, Heavy-duty cart – flatbed – heavy-duty trailer – KTS transport cart Make: KTS Germany Type: ASL Factory no.: 14243 Year of construction: 2012 Capacity: 16,000 kg Equipment weight: 1550 kg Chjdpjwgywpsfx Aduef Loading surface length: 5000 mm Loading surface width: 2000 mm Loading surface height: 690 mm Total length incl. drawbar: 6800 mm - Double steering of the wheels, Small turning circle – swivel angle 45° - Wooden floor Wheel design Twin wheels, solid rubber tyres on welded steel rims. ----- Heavy-duty cart – 12 metres Length: 12,020 mm Width: 2,510 mm Height: 590 mm Net weight: approx. 5,500 kg Total length incl. drawbar: 14,350 mm - Double steering of the wheels - Wooden base ----- Heavy-duty cart – 12 metres Length: 12,020 mm Width: 2,510 mm Height: 590 mm Net weight: approx. 5,500 kg Total length incl. drawbar: 14,350 mm - Double steering of the wheels - Wooden base ----- Heavy-duty cart - DAF Length: 2,500 mm Width: 1,520 mm Height : 350 mm Total length incl. drawbar : 3100 mm - Double steering of the wheels - Wooden base Price for the Heavy Duty cart : on request by e-mail

Condition: good (used), first registration: 10/2008, Year of construction: 2008, Empty weight: 8,200 kg Payload: 30,800 kg Codsuu Iy Sopfx Adushf GVW: 39,000 kg Technical condition: good Visual condition: moderate Contact Maarten Busser or Niels Busser for more information.

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Cedpfx Aowd Ulvedushf

Condition: excellent (used), Year of construction: 1999, Horizon Collating Tower MC80 a+m Staple-Fold Station SPF 10II Trimmer FC 10II Cjdpjh If Ebofx Aduehf Delivery Table, Jogger

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: Chsdov Iy H Ispfx Aduef M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Chsdpfxowqg Iis Adujf Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Cedpfxjwz Ic Ns Aduehf Electric motor 4 kW Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: good (used), Year of construction: 2016, functionality: fully functional, ESC screen printing machine model 600 H/E, semi-automatic, print format max. 400 x 550 mm Precision printing machine with vertical frame lifting designed for high-quality, precise screen printing on foils, scales, circuits, panels, glass, etc. Standard equipment: - vertical frame lifting with pressure in the longitudinal direction from right to left - pneumatic drive, infinitely adjustable - hardened and ground guide shafts with ball guides - pneumatic maintenance unit - pneumatic squeegee head with fine adjustment and automatic, vertical lifting for screen changing and cleaning - flood squeegee device - individual function control for setup operation - individual cycle with operation via foot switch - automatic cycle via timer - modern, synchronized screen frame lifting - print path adjustment infinitely via limit switch - metal vacuum base plate with micrometric fine adjustment in x-y axis - central height adjustment of the Printing unit via trapezoidal thread spindles - stepless squeegee angle adjustment readable via scale - squeegee quick release fasteners - printing and flood squeegee separately adjustable via pressure regulator and readable via pressure gauge Cjdpfx Asvvwbfsdujhf Technical data model 600 H/E: Vacuum plate: 500 x 700 mm max. printing format: 400 x 550 mm max. printing material height: 8 mm max. frame format: 600 x 850 mm micrometric fine adjustment: ± 10 mm air consumption: 11.3 I electrical connection: 110V/5A 230V/3.5A max. cycle performance: 1200 p/h Dimensions: Width: 1000 mm Depth: 800 mm Height: 1700 mm Packaging dimensions: 1000 x 880 x 1860 mm Net weight: 250 kg Gross weight: 375 kg • two printing squeegees - length according to customer specifications • two flood squeegees - length according to customer specifications Powder Machine 4050 The Powder Machine was specially developed for the easy powdering of DTF transfers. The continuously adjustable film holders allow films up to 40 x 50 cm to be processed. The thermal powder is evenly distributed on the film with one hand. Thanks to the vibration, the excess thermal powder is removed from the film. The thermal powder only sticks to the printed areas. With the Powder Machine you always achieve the optimal application of thermal powder for your transfers. Technical data: Dimensions: 79 x 42 x 64 cm Operating voltage: 230 VAC Power: 35 W Max. format: 40 x 50 cm Time setting: 0 - 3 seconds Volume: less than 70 dB (A) Net weight: 27.5 kg Shipping weight: 44 kg M&R Economax II small dryer

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Cjdpfx Ajb Umtkedujhf

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm Chodpfxov Hzqxe Aduef - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt Cedpfxjncfmve Aduohf If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: good (used), Buderus 825 M-2500kw. Low temperature boiler Chedpfsu I Ruaox Aduof

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,500 kg, Multiple pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2015 ISO 3A (51 cm) Capacity 3,500 kg Width 2,400 mm Forks 2,400 mm ID OS1677 Cedpjw Erl Asfx Aduehf

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Cjdewk Dw Uspfx Aduohf The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, shelf height: 3,500 mm, shelf length: 8,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, Three-bay pallet rack (M35112711-3) Codpjv Urrcofx Adujhf 8.5 m long, 3.5 m high, 1.1 m deep, 3 bays, 2.7 m wide, 2 beam levels each, shelf load 3000 kg. - 4 frames (RM3511 - RAL5019) - 8 base plates, shims, screws - 16 floor anchors (ZZBA1210) - 12 individual beams (T2711 - RAL2008) - 1 load plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / assembly location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 8,500 mm, shelf height: 4,500 mm, number of shelf rows: 1, clear span: 2,700 mm, 1-row pallet rack (M45112711-3) 8.5 m long, 4.5 m high, 1.1 m deep, 3 bays, each 2.7 m wide, 3 beam levels each, shelf load 3000 kg. - 4 frames (RM4511 - RAL5019) - 8 base plates, shims, screws Codev Urqxspfx Adujhf - 16 floor anchors (ZZBA1210) - 18 individual beams (T2711 - RAL2008) - 1 load plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / assembly location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 17,100 mm, shelf height: 3,500 mm, shelf length: 5,700 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 3, 3 two-bay pallet racks (M35112711-3) Chodpjv Urpzefx Aduof each 5.7 m long, 3.5 m high, 1.1 m deep, each 2 bays, 2.7 m wide, each 3 beam levels, shelf load 3000 kg. - 9 frames (RM3511 - RAL5019) - 18 base plates, shims, screws - 36 floor anchors (ZZBA1210) - 36 individual beams (T2711 - RAL2008) - 3 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, machine/vehicle number: EAN0729389556525, support length: 3,600 mm, shelf length: 11,200 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45113615-3) 11.2 m long, 4.5 m high, 1.1 m deep, 3 bays, 3.6 m wide, each with 3 beam levels, shelf load 3000 kg. Chedpfev Urchjx Adusf - 4 frames (RM4511 - RAL5019) - 8 base plates, shims, screws - 16 floor anchors (ZZBA1210) - 18 individual beams (T3615 - RAL2008) - 1 load indicator (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / assembly location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: Csdpev Uqwdjfx Aduohf - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, 2 single-row pallet racks + 3 double-row pallet racks (8 x M45112711-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 4 bays, 2.7 m wide, each with 3 beam levels, shelf load 3050 kg. - 40 frames (RM4511 - RAL5019) - 80 base plates, shims, and screws - 30 spacers/connectors for double rows (ZAbh20) - 160 ground anchors (ZZBA1210) - 192 single crossbeams (T27114 - RAL2008) - 10 collision protection/ram protection (ZRS40901) - 8 load plates (BSMcP) Frames bolted, not pre-assembled Cedpfx Adov Up Alsuehf Freight/Delivery: - max. 20 working days after receipt of payment - ex works site/installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 14,200 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 14,100 mm, load per truss pair (max.): 3,050 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45112711-3+) 14.1 m long, 4.5 m high, 1.1 m deep, 5 bays, each 2.7 m wide, 3 beam levels each, shelf load 3050 kg, complete with support grid 1000 kg. - 6 frames (RM3511 - RAL5019) Chsdpsv Unxlofx Adujf - 12 base plates, shims, and screws - 24 ground anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 support grids (ZG8811010004) - 1 collision protection / impact protection (ZRS40901) - 1 load-bearing plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 17,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, load capacity: 9,000 kg, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 2, 2 rows of pallet racks (4 x M35112711-3) Chjdpov Ungcofx Aduof each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.