Used Belflex Bf180 Sm for sale (27,671)

Condition: used, Year of construction: 2011, Overview This shrink packer SM 120 2P was built in 2011 by Italian manufacturer SMI. The machine is immediately available, currently dismantled and stored. There are no additional costs for removal. Technical Details Capacity: approx. 120 packs/minute (nominal) Equipment: Cans 0.33l and 0.5l in shrink packs With printed film 6x4 single-lane on pad shrink-wrapped in film 3x4 single-lane on pad shrink-wrapped in film 3x2 and 2x2 (double-lane) Accessories: 2 roll holders with gluing device Machine protection: Sliding doors Shrink tunnel: ST 6000 2, 4 zones, with 2 fans in the outlet Bwjb E Nuet Hzi Dsbxel

Year of construction: 1999, Condition: reconditioned (used), Mobile drum screen DOPPSTADT SM 618 Profi Length of the drum: 5.50 m Bwsb E Nubev H Ayuexol Diameter of the drum: 1.80 m Length of the side discharge conveyor: 5 m Length of the rear discharge conveyor: 5 m

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0217 + 1285, Offer 23112 Technical specifications: - Motor-driven unit + travelling unit - Total load capacity approx. 5000 kg - Load capacity per container device approx. 2500 kg - Load capacity per wheel 1250 kg - Smallest tank diameter 300 mm - Largest tank diameter 3250 mm - Distance adjustment adjustable in increments - Roller diameter approx. 400 mm - Roller width 80 mm Bwob E Nubewakufexjl - Electric remote control - Space requirement for driven unit approx. W 2000 x H 650 x D 450 mm - Space requirement for intermediate unit approx. W 1800 x H 450 x D 450 mm - Weight 450 kg

Condition: ready for operation (used), Bosch SM 20/30 LN - SM 20 / 30 LN servo module, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately Bweb E Nubjv E Tt Nexsl

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, Kaeser SM8 compressor with TA8 dryer and 280L receiver in very good condition TÜV until 04/26 Bob Ejrua U As Nubxswl

Condition: excellent (used), Year of construction: 2018, operating hours: 6,000 h, Functionality: fully functional, machine/vehicle number: 1234TT90, saw band length: 5,150 mm, saw band width: 41 mm, total height: 2,000 mm, total length: 1,900 mm, total width: 2,200 mm, feed length X-axis: 600 mm, type of input current: three-phase, cutting speed: 8 mm/min, cutting capacity: 420 mm, cutting range round at 90°: 420 mm, cutting width (max.): 500 mm, table height: 880 mm, overall weight: 2,400 kg, cutting height (max.): 420 mm, conveyor belt speed: 50 mm/s, table width: 600 mm, table length: 1,800 mm, working height: 880 mm, workpiece weight (max.): 10,000 kg, input voltage: 400 V, coolant pump power: 1 W, Automatic band saw MEBER mod. SM420+CN, used, overhauled, 6-month warranty Bsbewaxqbs E Nubxowl Delivered in April 2018 machine features: - cutting arch on square columns with linear bearings and tempered tracks - hydraulic bar feed with double speed - belt speed variator with vector inverter, - hydraulic cutting arch descent with balanced valve, with adjustable hydraulic thrust - motorized blade cleaning metal brush - blade development 5510 x 41 x 1.3 - double clamp, for reducing the end of the bar to zero - cutting capacity round diam. mm. 420 flat mm. 420 - computer for choosing the cutting length, no. of pieces, and any variation in cutting length on the same bar. - chip evacuator - automatic, hydraulic belt tension - automatic cutting arch height adjustment, with sensor - enhanced motor - reinforced reducer

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2710 Measurements depth 2420 Measurements height 2150 Machine weight 3500 Main Drive Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 350 mm Z-Axis Movement 300 mm V-Axis Movement +/- 75 mm U-Axis Movement +/- 75 mm Workpiece Workpiece X 1050 mm Workpiece Y 800 mm Workpiece Z 295 mm Bjb Esu Svyco Nubxowl Workpiece weight 1500 kg Table Outer length 780 mm Outer width 630 mm Additional Equipment Automatic Water Beam Threading Wire Chopper This 5-axis Mitsubishi FA 20 SM wire EDM machine was manufactured in 2006. It features a travel path of 500 x 350 x 300 mm, a conic angle capacity for a 260 mm workpiece height, and can handle workpieces up to 1500 kg. It supports wire diameters from 0.1 to 0.36 mm and includes automatic water beam threading and a wire chopper. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA 20 SM machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Mössner Rekord SM / 320 vertical bandsaw metal throat 310 mm roller diameter 320 mm Workpiece height max. 200 mm Working height 950 mm Cutting speed 12 - 750 m/min. Mains connection 380 Volt, 50 Hz 4 gear stages Space requirement approx. 800mm x 770mm x 1700 mm ( L x W x H ) Weight approx. 560 kg Tape welding machine: Ideal Table: 500mm x 500mm You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Bwob E Nst Di A Hsubxel Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2012, Condition: used, Type of fuel: Diesel Year of manufacture: 2012 Colour: Orange Field of application: Construction Drive: Wheel Empty weight: 17.000 kg Doppstadt SM 620 profi. Year: 2012. Weight: 17.000 kg. CE machine. 8 tons Fortuna axles. 2 way convenyor on the back. 35x35 mm. Tyres: 435/50R19,5 70%. Sidebelt is missing! ID NR: 263. Bwjb E Nuev Srnlsbxjl The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 2002, Impressions: 200 million Color(s): 6 Perfecting: 2/4 or 6/0 Autoplate Loading: Yes Size: 720 x 1020 mm Features & Equipment: CP 2000 Control System Preset Functionality Autoplate for quick plate changes Alcolor V Dampening System Tehnotrans Cooling & Refrigeration ITC (Integrated Temperature Control) Bwob Ejv Si Hlo Nubxel Powder Extracting System Blower Cabinet (Water-Cooled) Blanket & Impression Cylinder Wash System Eltex Antistatic Device Perfecting Device (Renewed)

Condition: ready for operation (used), Bosch SM 20 / 30 - SM 20/30 GTC pulse inverter, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bwob E Nusi D Uc Rjbxel

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg dimension machine xH: 0,8 x 0,7 x 1,65 m Bjb E Nova E E Toubxewl Steel and metal band saw Filing band length 2550 mm Additional equipment: Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *

Year of construction: 2018, operating hours: 6,356 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2018 Colour: Orange Field of application: Construction Drive: Wheel Empty weight: 24.000 kg CE mark: yes Doppstadt SM 720 SA Plus. Year: 2018. Hours: 6356. Weight: 24.000 kg. CE Machine. 8 tons BPW axles. Ad Blue. Central greasing system. 15x15 mm. Steelsuspension. 2 way side belt. 2 way convenyor. Radio Remote Control. 2 point hydr. outriggers. Tyres: 435/50R19,5 70%. ID NR: 169 C. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices. Bwjb E Nusv Srk Hjbxel

Condition: ready for operation (used), Bosch SM 20/30 GTC - SM 20 / 30 GTC pulse inverter 1070068043-207, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Bjb Eotqi Dpj Nubxswl

Year of construction: 2011, operating hours: 15,459 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2011 Field of application: Construction Drive: Wheel Empty weight: 17.000 kg CE mark: yes Reference number: 75 Doppstadt SM 620 Profi. Year: 2011. Hours: 15.459. Max weight: 17.000 kg. CE machine. 8 tons Fortuna axles. 3 point hydr. outriggers. Bwob Esv N Urzj Nubxjl 2 way side belt. 2 way convenyor on the back. 40x40 mm. Tyres: 435/50R19,5 70%. ID NR: 75. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: ready for operation (used), Bosch SM 25/50-C servo module SN:416106, used, minor signs of wear, 100% functional, scope of delivery as per photos Bwjb E Neldlr Ueubxjl

Year of construction: 2019, operating hours: 6,187 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2019 Colour: Orange Field of application: Construction Drive: Wheel Empty weight: 19.000 kg CE mark: yes Doppstadt SM 620 Plus 40 x 40 mm Drum Year: 2019. Hours: 6187. Weight: 19.000 kg. CE Machine. 9 tons ADR axles. 2 way side belt. 2 way convenyor on the back. 40x40 mm. Tyres: 435/50R19,5 80%. ID NR: 398. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices. Bweb Eov N Uq Rj Nubxjl

Condition: ready for operation (used), Heldt & Rossi Series SM 804/805 DC DC servo amplifier type 250-30, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bob Eji Ea D No Nubxjwl

Year of construction: 2011, operating hours: 3,425 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2011 Colour: Orange Field of application: Construction Drive: Wheel Bsb E Nuev N Uk Dsbxowl Empty weight: 15.000 kg CE mark: yes Doppstadt SM 518 Profi. Year: 09/11. Hours: 3425. Weight: 15.000 kg. CE Machine. 7 tons Fortuna axles. 2 way side convenyor. 2 way convenyor on the back. 15x15 mm. Tyres: 435/50R19,5 70%. ID NR: 369. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: ready for operation (used), Bosch SM 20/30 LN servo module 310606, used, was only briefly in test use, 100% functional, scope of delivery as per photos Bjb E Nji D Udgoubxjwl

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Beb E Nuboi D Ud Ioxowl

Condition: ready for operation (used), Bosch SM 20/30GTC servo module, used, normal signs of use, 100% functional Boboi D Ud Ds E Nubxewl

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Bsb E Nei D Ud Soubxowl

Condition: new, Bosch SM 10/20-TA servo module 1070055 128 S.Nr, unused, 100% functional, scope of delivery as per photos Bweb E Nubei D Ucusxsl

Condition: ready for operation (used), Heldt & Rossi Series SM 804/805 DC DC servo amplifier type 250-30, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bwsb E Nji Ea D Teubxel