Used Ciata Thv-50 for sale (33,358)

Condition: used, Year of construction: 2016, operating hours: 7,993 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, overall weight: 4,500 kg, Control SIEMENS CELOS 840SI OPERATE MULTI TOUCH Hours POWER ON 18,527 h SPINDLE ON 7,993 h Speed 14,000 rpm Magazine 30 pcs. Itedjx Ivumepfx Ad Eof Accessories - Measuring probe TS649 - Chip conveyor - Transformer Video available.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. Ijdpfx Ajy Aurmod Estf The system is available at short notice!

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to #000,5. The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The capsule filling machine SPT-FS 50 for general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 6; Max.production quantityof capsules - 50000 psc/h; Capsule size #00,1,2,3,4 (optional #000,5) Itedpef Hp U Usfx Ad Eof Weight of machine - 1470 kg; Space consumption - 1.200 x 1.470 x 1.850 mm

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 6,040 mm, fork length: 1,600 mm, total length: 5,120 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 Iodpfjy Aznbsx Ad Eotf - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2016, lifting height: 10 mm, fuel type: electric, fork length: 1,200 mm, Empty weight: 8.690 kg Lifting capacity: 4.735 kg Iodpeyz Sigjfx Ad Eotf Maximum passing height: 0,277 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Transport dimensions (LxWxH): 3,37x2 Please contact Christian Theißen for more information Manufacturer: Yale Model: ERP 50 VM E2570 Year of build: 2016 Condition: Used Data: Max. lifting height: 5,47 m Max. Lifting capacity: 4.735 kg Length forks: 1,20 m Drive type: Battery Dimensions LxW (without forks): 3,37 x 2,00 m Stowed height: 2,77 m Empty weight: 8.690 kg Special features: white tires, trailer operation possible. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Itjdpfxjyz R Eyo Ad Eef Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tilt device Technical Specifications: Manufacturer: Presto Model: CC 50 M Iodpfxjyz R Ets Ad Ejtf Year: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput depending on bulk density: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video is available on our website or YouTube channel. Please note: All technical data is based on information from the manufacturer. We accept no liability for the details provided or for any possible errors. Subject to prior sale; offer is non-binding and may be revoked at any time. Inspections are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Infeed opening approx. 500 x 490 mm Iodpfx Asyr Tqred Ejtf Drive motor: 22 kW

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Itedpfxsyr Tm Ho Ad Esf Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Iedpfsyr I Husx Ad Eetf Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: used, mileage: 240,000 km, power: 80 kW (108.77 HP), first registration: 05/2016, fuel type: diesel, overall weight: 5,000 kg, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: air conditioning, navigation system, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales advisor. Isdoyr U U Ejpfx Ad Ejtf Attention!!! Preferred sale to business customers only Internal ID Number: [3208] ----Optional add-ons: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emissions test * Nationwide delivery * Financing possible with or without down payment ----Vehicle highlights: * Regularly serviced * German vehicle * One previous owner * Immediately operational * Euro 5 standard * High roof, long wheelbase panel van * Cruise control * Air conditioning * Bluetooth multimedia function * Rear-view camera * Tow bar = 3,500 kg towing capacity Special equipment: Driver/passenger airbag, audio navigation system RNS 6000 (front speakers), electrically adjustable and heated exterior mirrors, wooden flooring in cargo area, suspension package B, lockable glove compartment, adjustable steering column (steering wheel), passenger double seat in cabin, high wood interior trim in load/passenger area, lashing rails in cargo area - on floor, side wall, and roof frame Additional equipment: Storage tray/compartment above windshield, driver airbag, traction control system (ASR), rear entry handle on right rear post, driver assistance system: brake assist (HBA), digital tachograph, windshield with sun strip at top, rear wing doors without glazing, driver's cab interior lights: 2 reading lamps in front, body/variant: high standard panel van, high-roof variant, fuel tank: 75 liters, full-height partition in cargo area without window, model update, engine: 2.0 l – 80 kW TDI, parking light switch, wheelbase 3,665 mm, tire repair kit, low emission as per Euro 5 standard, right-side sliding door for cargo/passenger area, upholstery: fabric, driver's cab seats: adjustable driver's seat, gross vehicle weight 5.00 t, additional brake light ----Interested in leasing or financing? We offer attractive options – even without down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Notice: All details online are non-binding and serve solely as general vehicle descriptions. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is determined exclusively by the purchase contract signed on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, total width: 1,300 mm, total length: 750 mm, total height: 2,900 mm, Empty weight: 1.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Table type: Fixed table - Table length [mm]: 700 - Table width [mm]: 600 - Drilling depth [mm]: 220 - Drilling capacity [mm]: 50 - Min. spindle speed [rpm]: 61 - Max. spindle speed [rpm]: 1239 - Transport dimensions: 750mm x 1300mm x 2900mm (l x w x h) Iedoyznbrjpfx Ad Ejtf - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW Ijdpfey Dp E Rjx Ad Ejtf All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing Itsdpfxexykcge Ad Eof The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: used, Year of construction: 2013, operating hours: 15,453 h, lifting height: 5,010 mm, fuel type: diesel, mast type: duplex, fork length: 1,190 mm, fork width: 1,280 mm, total height: 3,370 mm, total length: 3,160 mm, total width: 1,190 mm, color: other, Empty weight: 6.430 kg Lifting capacity: 5.000 kg - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394D50974 - Operating hours: 15453 - Lifting capacity: 5000kg - Lifting height: 5010mm - Overhead clearance: 3360mm - Free lift: 0mm - Fork length: 1190mm - Maximum fork width: 1280mm - Minimum fork width: 270mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Joystick, Half cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: VW/Audi - Transport dimensions: 3160mm x 1190mm x 3370mm (l x w x h) - Transport weight [kg]: 6430kg - Transport packages [pcs.]: 1 Ijdpoyzghqsfx Ad Ejtf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), functionality: fully functional, year of last overhaul: 2025, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 258 kg, input frequency: 50 Hz, electrical fuse: 16 A, type of input current: three-phase, Lifting kneader HLK 50 TOP bakery dough mixer Model: HLK 50 Flour dust cover, 2 speeds, Lifting kneader with stainless steel bowl & kneading arm Machine is mobile Tested according to DGUV V3 – only with us Ijdpfjy Ac Uvsx Ad Estf Connection: 400V, 16A-CEE plug Used machine, cleaned

Condition: good (used), Grinding media, ceramic grinding media, polishing media for vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, continuous vibrators -Manufacturer: Rösler, Ceramic grinding wheels type RS 40/40 2 bags -Contents: 25 kg/bag -Price/Sale: complete -Transport dimensions: 400/380/H400 mm Iedpeink Tisfx Ad Estf -Total weight: 50 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake Itsdob A Nlqjpfx Ad Ejf -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 Ijdpfx Adoyz R Hde Estf - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: excellent (used), grinding length 600 mm Itsdsyyqt Ijpfx Ad Eef grinding width 300 mm workpiece height 350 mm magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 225 x 25 x 51 mm total power requirement 4 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,5x1,5x1,8 m

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Iedpfeh Hxubex Ad Ejtf Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Condition: used, Year of construction: 2000, functionality: not functional, Hurco VMX 50 machining center with Ultimax control IKZ chip conveyor Itedpfst H I Ugox Ad Ejf

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Itsdpsulz Iwsfx Ad Esf

Condition: ready for operation (used), Year of construction: 1996, portalkran 50 ton 10meter Span Itjdpegggh Ajfx Ad Esf

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 5,399 h, load capacity: 2,500 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,200 mm, power: 57 kW (77.50 HP), empty load weight: 5,200 kg, total length: 3,500 mm, drive type: Diesel, construction width: 1,800 mm, Rigid telescopic handler Mast type: Telescopic Condition: Ready for operation and fully functional Itsdsy Aq Udspfx Ad Eef Technical condition: good Front tire type: Pneumatic Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire condition: 20 - 40% Description: JCB 525-540 telehandler - - Year of manufacture: 2005 - - 5,399 operating hours - - 5 m outreach - - 2.5 t lifting capacity - - 4-cylinder Perkins diesel engine, 77 HP - - joystick control - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - width 1.80 m - height 2.20 m - length approx. 3.5 m - - unladen weight 5,200 kg - -includes used pallet fork - - new seat cushion - - LEFT DOOR MISSING - - otherwise good condition - - 1 nearly new bucket (1.80 m width) available at extra cost! Quick coupler, third valve, semi-cab, heating, full cab.