Used Ciata Thv-50 for sale (34,968)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 95,739 h, functionality: fully functional, machine/vehicle number: 15125250324, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 3,000 kg, overall weight: 22,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 38,229 h, coolant supply: 40 bar, spindle motor power: 48 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a DECKEL MAHO DMF 250 linear, manufactured in 2005, from our current production facility. Sale due to modernization of the machine park. The machine is operational, connected to power, and can be inspected and demonstrated in operation after prior arrangement at 84089 Aiglsbach. TECHNICAL DATA Manufacturer / Model: DECKEL MAHO DMF 250 linear Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Machine number: 15125250324 Travel ranges X / Y / Z: 2,500 / 920 / 820 mm Tool holder: SK50 Spindle speed: 10,000 min⁻¹ Tool magazine: 30 positions Internal cooling (IKZ): 40 bar Measuring probe: Heidenhain Max. table load: 3,000 kg Machine weight: approx. 22,000 kg OPERATING HOURS Total operating hours according to the recorded meter reading: approx. 95,739 h Spindle hours according to the recorded meter reading: approx. 38,229 h Motor spindle replaced after approx. 36,670 spindle hours; therefore, approx. 1,559 spindle hours since replacement, based on the meter reading. As the machine is in current operation, the hours may increase until the sale. Gujdpfx Ags Aitphslei EXTENSIVE OVERHAUL 2026 Documented net overhaul costs: approx. €61,200. - Motor spindle replaced - Y-axis: Linear guides / guide carriages and ball screw overhauled - Z-ball screw including bearing renewed - Geometry newly adjusted and measured - Current Renishaw ball bar measurement available Evidence of the overhaul measures and measurements is available. PRICE AND INSPECTION €99,900 net, negotiable, plus statutory VAT. Location: 84089 Aiglsbach. Inspection and demonstration under power after prior arrangement.

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Gedpfx Aez Iqn Nogljui Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Year of construction: 1991, condition: used, functionality: fully functional, weight 240 kg max 50 mm Gsdpeztfvbofx Agloui ja serial number 2035

Condition: used, Year of construction: 2013, operating hours: 48,437 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Gujdpe Advfrsfx Aglei Operating hours: approx. 48,437 h Spindle hours: approx. 33,559 h Condition: used Available from December 2026 Technical features & accessories: - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - 3 Y-axes - Y-axis on slides 1 and 2 - Chip conveyor - LNS bar loader - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2011, pressing force: 50 t, working range: 1,600 mm, 1 Used Very Clean Bystronic 1.5metre x 50ton cnc pressbrake for sale - hydraulic down stroke Description Year 2011 Pressure 50 ton Bed length: 1.6metre / 1600mm stroke 150 mm Cnc control: CYBELEC DNC 880S 4 axis in total Quick release tool clamps Total power requirement 5,5 kW Guodpfevq N Hcsx Aglji Weight of the machine 4800 kg

Condition: used, Year of construction: 2007, operating hours: 2,920 h, Equipment: all wheel drive, JCB 524-50 telescopic loader, manufactured in 2007! Formerly used by the military! ---- * Manufacturer: JCB * Model: 524-50 * Year of manufacture: 2007 * Recorded operating hours: approx. 2,920 * Formerly used by the military * Equipped with pallet forks * Load capacity: approx. 2,400 kg * Lifting height: approx. 5.3 meters * First owner * Good tires * Weight: 5,500 kg * Load sensor needs to be replaced * More photos + video available upon request (WhatsApp Erik) * Price: 22,900 Euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp ?All information is without guarantee. Errors and prior sale are reserved.? Gusdpfxe Akamie Aglei

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Guedps Ai H N Rjfx Agloi Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from SafanDarley. Type EHP LS 50 15 12 CL Capacity: 1550 x 50 tons New Delem DA69T control system Y1, Y2, X, R, Z1, and Z2 are CNC controlled Gujdpfx Asz S H Eajgloi Hydraulic Wila New Standard upper clamping system Pneumatic Wila 13mm lower clamping system.

Condition: used, total length: 1,900 mm, total width: 3,900 mm, total height: 2,400 mm, Year of manufacture: 2010 Colour: Red Weight: 4.600 kg Price: On request - Year: 2010 - CE marking present: Yes - Serial number: 10069 - Drive system: Conventional - Control system brand: Cybelec - Control system type: - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X Guedpfxe Aiquws Aglji - Press force [ton]: 50 - Max. working width [mm]: 1650 - Column gap [mm]: 1500 - Throat depth [mm]: 400 - Backgauge depth [mm]: 700 - Crowning system: None - Options: Additional finger stop, Finger safety guard - Transport dimensions: 1900mm x 3900mm x 2400mm (l x w x h) - Transport weight [kg]: 4600kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, empty load weight: 6,450 kg, maximum load weight: 28,550 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, suspension: air, tire size: 435/50 R19,5, Equipment: ABS, | Kögel SN Mega 24 Tautliner | Toolboxes on left and right | Edscha canvas cover | Tires 435/50/19.5 | SAF axles | Errors, typos, and prior sale are subject to change. Gueds Akd Amopfx Aglsi

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00723, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2024.03. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2024.03 Warranty term (months): 12   Gjdpfx Ao Ai Hghjgljui Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: good (used), Year of construction: 2003, Used Guifil press brake Type FCS 20 50 Capacity 2050 x 50 tons Delem DA65 CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a complete set of tooling (not shown). Gjdpj Ahwuwjfx Aglsui

Condition: used, mileage: 453,000 km, power: 125 kW (169.95 HP), first registration: 05/2017, fuel type: diesel, overall weight: 5,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 15 m³, loading space length: 3,800 mm, loading space width: 1,800 mm, loading space height: 2,190 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Iveco Daily 50-170 Hi Matic Refrigerated Box Body, Carrier Euro 6 For inquiries: 1126961 * Condition: very good * Output: 125 kW / 170 hp * ABS * ASR * ESP * Audio system: Radio with CD player / USB and Bluetooth hands-free system * Exterior mirrors, electrically adjustable and heated * Vehicle key with remote control * Reversing camera * Cab: Driver's seat, comfort version * Electronic brake force distribution * Low emissions according to Euro 6 emissions standard * Seats in the cab: Double passenger seat with headrests * Permissible total weight: 3.50 t Gsdj Akf R Espfx Aglsui Body: Refrigerated box body * Refrigeration unit: Carrier - Supra 550 Dimensions (cargo compartment / loading area) * Cargo compartment length: 3,800 mm * Cargo compartment width: 1,800 mm * Cargo compartment height: 2,190 mm ----Price: 11,900 EUR + 19% VAT For further questions, you can reach us on the following telephone numbers: * We speak: German, English, French, Polish and ??? Typographical errors, errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 1998, Control system: Heidenhain TNC 124 Travel ranges X/Y/Z: 500 x 400 x 400 mm Spindle speed: 4,500 rpm Gsdpfx Ae Ai H Nijgloui Tool holder: SK 40 Manual rotary table with tilting axis: 700 x 500 mm

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Gusdomx Sl Tspfx Agloi The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Guedpfxo Akc Nmj Aglei

Condition: used, Year of construction: 2007, machine/vehicle number: 1799-260027, Farman 50N – Universal Drill Bit Grinder Gujdpj Agb Szefx Aglji The Farman 50N Universal Drill Grinder is a robust universal drill bit grinder manufactured by the Taiwanese company Farman in Taichung. Machines from this manufacturer were previously also distributed through the German suppliers Fröhlich, Dörken, and Nenok. The machine is designed for the precise and cost-effective regrinding of twist drills and HSS fluted drills. Thanks to its sturdy construction and manual operation, it is particularly well-suited for tool shops as well as for businesses in the steel construction, metal fabrication, and mechanical engineering industries. With the Farman 50N, used drilling tools with a diameter of up to 50 mm and the standard steel construction grind can be resharpened and reused. This extends tool life and reduces ongoing tool costs.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Type EHP 50 20 15 Guedpfx Asxq Dfvsglei Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Condition: excellent (used), Year of construction: 2010, operating hours: 25,540 h, 1 used 5-axis machining center DECKEL MAHO DMU 50 with SIEMENS control Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Gsdpfx Ags Afbv Ssljui

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Godpju Tkclsfx Aglsui Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: HorizOne50_5, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Gjdpfx Ago Ah Sb Aelsui 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR Godpfx Agoz Rpkcelsui (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit BAT 102 Automatic Stacker S-3 Gusdpozv S R Defx Agloi Max. Sheet Size X : 1020 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: used, Year of construction: 1981, fuel type: diesel, color: red, mileage: 1,001 km, first registration: 01/1981, empty load weight: 14,500 kg, gearing type: automatic, axle configuration: 4x2, driver cabin: other, Vehicle location: Bovenden, automatic Guodpfx Aop N Dayogloi Body: Load capacity approx. 4,000 kg 6 cylinder Deutz diesel, lifting height 2,750 mm, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Model: METRO HES 50 Power supply: 230 V, single-phase, N and PE Guodpo Aibgqjfx Aglji Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.