Used Ajce Ab-480F for sale (12,624)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Ncedpsvwlqqofx Ahwon Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a Njdpfxst Irffe Ahwocn modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: used, fuel type: diesel, color: other, first registration: 01/2001, Year of construction: 2001, General Country of production: Zweden = More information = Ncjdpsxv Ddcefx Ahwon Number of cylinders: 6 GVW: 18.000 kg Engine type: Volvo Penta

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Nedpfjulu Nuox Ahwecn Manufactured by Electro Heat Sweden AB.

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Ncedotp Thbspfx Ahwen Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: new, Year of construction: 2025, Weights Empty weight: 1.800 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 20-35ton Ncjdpfx Ahoq Ixuvjwon Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you new excavator mounted Pile driver- Pile Hammer, Vibro Pile hammer, Vibratory pile driver, Vibratory Hammer. This model AJCE AVH30 fits on excavator class 20-35 ton. You don't need Power Pack, that will save you money! The weight is 1800kg. It will be delivered together with special extention boom to connect on the excavator. You can see it on the photos. We have also Side Grip type vibrohammers available. Contact us for details. We can ship worldwide. - Vibrofonceur Vibrohammer Piledriver Vibro högförare battipalo возач гомиле conductor de pila pilot hromady cölöpverő Rammbock haugesjåfør bate estaca sonetă ciocan vibro martelo vibro vibrohammer martillo vibratorio vibro marteau Vibrationshammer čekić vibro młot wibracyjny vibro plaktukas вибромолот вибро чук

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Other information Fits to following machines: 28-45TON Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Nodpfxov Nhv Hs Ahwocn Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2024, General information Field of application: Construction Reference number: 3 Drivetrain Make of engine: Parker Ncodpfxjq Ixrwj Ahwjn Weights Empty weight: 600 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-10ton Delivery terms: FOB Working pressure: 230 bar Required hydraulic flow: 90 l/min Additional information Please contact Ö. Inalkac for more information AJCE ACR52H mini concrete crusser is 550kg and fits on 5~10 ton excavator. ACR52H is with hydraulic rotatio, double cylinder and speed up valve. Available from our Netherlands warehouse. vergruizer, pulverizer, crusher, Abbruchscheren, Betonpulverisierer, concasseur à béton, Betonbrecher, trituradora de concreto, дробилица за бетон, kruszarka do betonu, concasor de beton, betongkross, betonknuser

Year of construction: 2023, condition: used, General information New: Yes Reference number: 2 Weights Empty weight: 930 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Nedsq Ixtfepfx Ahwocn Other information Delivery terms: EXW Latest inspection: new Production country: KR Additional information Please contact Ö. Inalkac for more information AJCE ACP-20 Vibration Plate Compactor for excavators. ACP20 is 920kg and fits on 16-26ton excavator. We have also Compactors for 5, 10, 15, 20, 30 ton excavators. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Nsdpfjxqf Rmex Ahwjcn

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Ncsdpott Sy Refx Ahwen Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: new, Thickness: from 10 - 30 mm Width: up to 50 mm Length: from 1200 - 1500 mm Loading height: 700 mm Swedabo AB BSCx2 sticker-stacker cassettes, We offer liner cassettes to make your board packing system easier. - Thickness: from 10 – 30 mm, - Width: up to 50 mm, - Length: from 1200 - 1500 mm, - Loading height: max 700 mm. Nsdpfx Askm Rwtohwjcn

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc option) CNC turning/milling center with tailstock, driven tools, and a 140 mm real Y-axis, 35° inclined bed, and linear roller guides Available in our showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 BMT55 stations 12 of which are driven Max. speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional: 254 mm) Spindle nose: A2-6 (optional: A2-8) Max. bar diameter: 52 mm (optional: 65, 75, and 91 mm) ) Spindle bore diameter 66 mm Direct drive power 22/30 kW Max. speed 4,000 rpm Tailstock diameter 110 mm/Mk 3 Tailstock travel 850 mm Dimensions (W x D x H) 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories Coolant system Warning light with 3 colors Work area lighting Central lubrication Programmable tailstock Ncodpfeqa Dtfex Ahwon Set of soft jaws Tools and toolbox CE conformity Operating instructions Incl. special accessories Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar feeder interface Video shows DT500

Condition: used, For sale: Nedpfx Aewhlhvjhwjcn GEODESIGN AB AQUA BARRIER FLOOD BARRIER Aluminum pallet barrier, approximately 400 m long, Sold in quantities of 100 m or more Packaged in several crates; Without film, beams, or pallets.

Condition: used, Bandsaw Njdewv S Acepfx Ahwscn Manufacturer: Waco Jonsered AB Model: Bandresaw BK60 Year: 2015 Weight 8000 kg Feed speed: 10-60 m/min Max. cutting height: 300 mm Max. distance sawband to fence side: 235 mm Max. width of the feed unit: 400 mm Min. distance sawband to sawband: 10 mm Feed rollers, diameter: 165 mm Feed rollers, height: 300 mm Saw wheel, diameter: 1080 mm Saw wheel, width: 100 mm Saw band, cutting speed: 42 m/sec Saw motors: 22 kW Feed unit (frequency converter): 5,5kW

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: documentation/manual, type plate available, Liquid smoke dosing device for a smoking chamber; the device is designed for dosing into two chambers. Njdew Emd Hjpfx Ahwjcn

Condition: used, mileage: 611,265 km, power: 355 kW (482.67 HP), first registration: 11/2020, fuel type: diesel, tire size: 315/70R22.5, wheelbase: 3,800 mm, color: white, driver cabin: other, gearing type: other, emission class: none, suspension: other, operation weight: 315 kg, Equipment: cabin, cruise control, differential lock, onboard computer, traction control, DAF XF 480 FT, 2020, 611,265 km, automatic transmission, ZF intarder, fridge, side skirts, 315/70R22.5, double fuel tank, 2 units available Ncjdpfxexcqt Re Ahwjn

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Ncodpfxev S Iqcs Ahwen

Condition: new, Year of construction: 2026, Thread cutting device Undercutting device Programmable drilling depth stop Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Option R1: Infinitely variable spindle speeds with intermediate gearing, speed range 100-2000 rpm Option R2: Infinitely variable spindle speeds with intermediate gearing, speed range 70-1400 rpm Drilling capacity 35/40 mm Ncedpfx Asd H Rh Rjhwjn Spindle taper MK 4 Drilling depth 160 mm Throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-reversible, 1.5/3.0 kW Weight 420 kg Option Drill Set No.6: Taper arbor B18/ MK 4, Keyless drill chuck B18/ 3-16 mm, Machine vice No. 2-140 and T-slot bolts, EUR 910.00 Option: Automatic spindle stop at upper drill spindle position, EUR 432.00 Option: Chip break module EUR 432.00 Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! FLOTT AUTHORIZED DEALER

Condition: new, Year of construction: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle Taper: MK II Drilling Depth: 100 mm Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Slot Width (mm): Number: 2, 125, 13/26 Speed Display: Digital Drill Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Drill Feed Table Height Adjustment with Rack-and-Pinion Motor: Three-phase AC – frequency-controlled, 230 V, 0.75 kW Spindle Speeds: Infinitely variable 30 – 3000 rpm Table Work Surface: 155 - 415 mm Ncodpovu Tmnsfx Ahwen Base Work Surface: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Optional Accessories Drilling Bundle 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-action drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 D0Ezfi Factory warranty: 3 years Free delivery including packaging (Germany only) Delivery time: available immediately from stock NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN OFFER!

Condition: new, Year of construction: 2026, Spindle speed electronically variable, 40-4000 rpm Spindle: MT2 Table height adjustment via rack and pinion Maximum tapping capacity: M12 Setting of tapping depth via digital depth indicator digital speed display digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 15 mm / 18 mm Drilling depth: 70 mm Throat (distance from spindle to column): 220 mm Column diameter: 70 mm Usable table area (W x L): 300 x 250 mm Machine dimensions (W x D x H): 420 x 520 x 850 mm Weight: 65 kg Max. distance spindle/table/base: 300 / 370 / 420 mm Motor: single-phase AC, controlled by frequency inverter, 230 V, 0.54 kW OPTIONAL Drill Package 2 (No. 296591) - Felix 80 vice - Quick-action drill chuck B16 1-13 mm - Morse taper arbor B16 / MT2 - Reducing sleeve MT2 / MT1 Price: €315 Factory warranty: 3 years Nsdpfx Ajig H Rdohwecn Delivery free of charge including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Condition: used, mileage: 190,000 km, power: 290 kW (394.29 HP), first registration: 03/2023, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro6, brakes: retarder, Equipment: ABS, air conditioning, parking heater, +++Images are for illustration purposes only+++ General Information Engine: Mercedes-Benz AdBlue Emission standard: EURO 6 Total seats: 50 Seats: 46+3+1 high/fixed Standing places: 104 Transmission: Automatic Safety * Retarder * Cruise control * ABS, ASR, EBS * Fog lights * Reversing camera * Multifunction steering wheel Passenger Compartment * Auxiliary heater * Automatic climate control * Double glazing * Driver's microphone * Pram/baby carriage space * Wheelchair ramp * Wheelchair space * Stop request button Audio, Communication, Electronics * Radio * USB port on multimedia system Exterior * Towbar prepared * Matrix/destination display Lawo * Double-width doors, number: 3 * Lift/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans Njdpfx Asymu Emehwocn * Roof ventilator Miscellaneous * German registration certificate * Twin tyres * Vehicle length: 18.12 m * Vehicle width: 2.55 m * Vehicle height: 3.10 m * Wheel covers Our internal vehicle number: 999056 Errors excepted. Images and description may differ from the actual vehicle. Over 300 vehicles available at all times.

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, loading space volume: 15 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, 600 mm drop sides + 500 mm extension drop sides, hot-dip galvanized drop sides, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Ncsdpfx Aheylh U Sowon

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. Njdpfx Aheyk Ib Ajwscn - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- - Wheel dresser diamond nett price EUR 100,- - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, loading space volume: 15 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, 600 mm drop sides + 500 mm extension drop sides, hot-dip galvanized drop sides, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Nsdpfjykkghjx Ahwscn