Used Ajce Ab-600M for sale (13,988)

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 10 Weights Empty weight: 1.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Pgjdpfx Aaoq Ixtxshsg Other information Fits to following machines: 17-24ton excavator Delivery terms: DAP, EXW Working pressure: 210 bar Required hydraulic flow: 90 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you all range of selector/ demolition/ sorting grab/ grabs/ grapples. All grapples with one year warranty. Contact us for details. Also available as non-rotating version. We have grapples from 75kg to 2000kg in stock in our Netherlands warehouse. We can ship worldwide! selectorgrab, selector grab, grapple, grapples, grappin, Schrottscheren, greifen, megragad, grajfer, PINZAS DE SELECCIÓN Y DEMOLICIÓN, PINCE DE TRI, KOCKÁZATKÖVEK, TORTAS DE CLASSIFICAÇÃO, PUNCTE DE SORTURI, Pinze Demolitrici, Selezionatrici, Pinces de Demolition, chwytaka, chwytak

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 15 Weights Empty weight: 375 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 4~8 ton Special for Backhoe Loader. Fits on JCB 3cx/4cx Delivery terms: EXW Podpjq Ixucofx Aahegg Working pressure: 110-140 bar Required hydraulic flow: 70 l/min Strike count: 500-900 Production country: KR Additional information Please contact Ö. Inalkac for more information ABH-400M is a breaker for Backhoe Loaders. This model is included pins for JCB 3cx, 4cx and also for Hidromek backhoe loader! We can also supply pins for CAT and Volvo backhoe loaders. AJCE is looking for dealers! contact us for details. хидравличен чук hidraulinis plaktukas Hydraulikhammer marteau hydraulique BRH martillo hidráulico ciocan hidraulic hidraulikus kalapács hidraulični čekić martelo hidráulico hydraulické kladivo υδραυλικό σφυρί

Condition: good (used), frame height: 2,190 mm, TECHNICAL DATA • Manufacturer: META • Frame height: 2,400 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 units • Surface finish: galvanized • Boltless assembly • Condition: used Large quantities available immediately. PRICES net per unit, plus VAT: Starter bay: 1 - 5 bays: €75.70 6 - 20 bays: €72.67 21 - 50 bays: €69.64 from 51 bays: €66.62 Add-on bays: 1 - 10 bays: €54.10 11 - 25 bays: €51.94 26 - 75 bays: €49.77 Podpsuk E Thofx Aahsgg from 76 bays: €47.61 Tiered pricing: Ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or dispatch is available at an extra charge. The additional costs depend on the delivery location and the size of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon when placing your order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, is active in the trade of new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and craft businesses. We offer regularly updated, interesting used equipment offers from various manufacturers/brands at attractive terms. If you have any questions, please feel free to contact us. Four to win – The four success components of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, Year of construction: 2023, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Work The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. Pjdpfx Aasduub Ushsgg - Marking of component using inkjet. - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Advantages - Makes notching/cutting effective and precise - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy. Podpfed Arwhex Aahogg

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Pgodpfx Asr Hbcfoaheg Rema system with measuring frame type 9001 Hydraulic log kickers

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options Pgedpfovri Ddjx Aahjg • Including haul-off • Including cooling bath

Condition: new, functionality: fully functional, color: grey-black, overall weight: 820 kg, operation weight: 820 kg, Year of construction: 2026, The AJCE Europe AS100HZ grapple is a 820 kg non-rotating grapple. Standard features include S-adapter, exchangeable blades, double cylinder, and safety/holding cylinder valve. The AS100HZ is suitable for 16-22 ton excavators. This is a reinforced model designed for heavy demolition work. We offer a complete range of selector grapples from 75 kg to 2000 kg, available from our warehouse in the Netherlands. Also available as a non-rotating version! Pjdpfx Aex Tqlweahegg Feel free to contact us for more details. Worldwide shipping available. Grapple, grab, Pince de Tri, Greifer, Grapin,

Condition: new, functionality: fully functional, overall weight: 1,100 kg, operation weight: 1,100 kg, suspension: steel, Year of construction: 2026, Equipment: gripper hydraulics, The AJCE Europe AS300HZ grapple is a 1100kg non-rotating grapple. Standard with S-adapter, replaceable blades, double cylinder, and safety/holding cylinder valve. The AS300HZ fits 20-30 ton excavators. Pgedpsx Tgv Eofx Aahsg This is a reinforced model suitable for heavy demolition work. We stock a complete range of selector grapples from 75kg to 2000kg in our Netherlands warehouse. Also available as a non-rotating version! Feel free to contact us for details. Worldwide shipping available. grapple, selector grapple, demolition grapple, sorting grapple.

Condition: new, functionality: fully functional, overall weight: 288 kg, Year of construction: 2026, Equipment: gripper hydraulics, The AJCE Europe AS40HZ grapple is a 288 kg non-rotating selector grapple. Equipped with a standard S-adapter, exchangeable blades, and a safety/holding cylinder valve. This is a reinforced model, suitable for heavy demolition work. We offer a complete range of selector grapples from 75 kg to 2000 kg available from our Netherlands warehouse. Pedpfsx Tgunjx Aahogg Feel free to contact us for more information. Worldwide shipping available. grijper, gripen, Pince de Tri, Greifer, Grapin,

Condition: used, functionality: fully functional, Year of construction: 2010, power: 41 kW (55.74 HP), load capacity: 750 kg, mast type: telescopic, lifting height: 26,000 mm, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 18,000 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: diesel, color: red, Equipment: UVV, Technical specifications Year of manufacture: 2010 Engine: Diesel Pgjdpex U Tzwsfx Aahjg Working height: 28.00 m Platform height: 26.00 m Platform extension: 2.13 m Platform dimensions (L x W): 5.48 m x 2.44 m Overall dimensions (L x W x H): 5.96 m x 2.50 m x 3.20 m Load capacity: 750 kg Controls: Proportional Gradeability: 40% Weight: 18,000 kg Travel speed: 0.7 - 4.0 km/h All-wheel drive General signs of use, fully functional, UVV tested

Condition: new, Year of construction: 2026, Butterfly Table BS20 Pjdpfs Nn Hyex Aahogg Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, Podpjfg Tatsfx Aahogg 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Pgodpfxsx Tdtno Aahjg Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Pedpfx Aaothfddjhjgg clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2451648, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2017 Motor: Electric Working height: 32.15 m Platform height: 30.15 m Pgsdpfx Ajw Evxaoaheg Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25% Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Condition: excellent (used), Here we offer you a plasma - discharge layering system. Plasma - discharge layering system solut Plasma plant for the decoating of DLC Vacuumrecipient 200 x 200 x 200 mm Microprocessor control for gas mixtures PC engine (industrial PC) and printer for process documentation Vacuum pump, Alcatel model ACP 28 Type: As 200 DLC Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Pjdpfjdz Achex Aahjgg Written order possible by email or fax

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Pgodpfx Ajuprqweahsg Used, functional condition

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2451638, load capacity: 600 kg, lifting height: 30,430 mm, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, operation weight: 21,500 kg, Equipment: UVV, all wheel drive, differential lock, Technical data: Working height: 32.43m Pgsdpfx Astw Uqkeaheg Platform height: 30.43m Platform dimensions: 5.80mx1.20m Platform extension: 1.90m Load capacity: 600kg Dead weight: 21500 kg Gradeability: approx. 25% All-wheel drive, all-wheel steering, outriggers, fully functional, general signs of use

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Pjdepitfxepfx Aahogg

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Pjdovgrh Uopfx Aahegg Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Pgodpfxsv T I Evo Aahsg Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 496 h, load capacity: 750 kg, lifting height: 14,300 mm, lifting power: 750 kg/m, platform length: 4,500 mm, platform width: 2,360 mm, overall weight: 9,000 kg, transport length: 4,840 mm, transport width: 2,460 mm, transport height: 2,370 mm, fuel type: electric, tire condition: 85 %, wheelbase: 3,200 mm, color: blue, Equipment: UVV, === KEY SPECIFICATIONS === Pedpfx Asx Nhvrjahsgg Year of manufacture: 2019 Operating hours: 496 h Machine width: 2.46 m Drive system: 2WD (two-wheel drive) Driveable at full height: Yes Extendable platform: Yes (up to 2.70 m) Power output: Electric drive, 80 V / 540 Ah Working height: 16.30 m Platform capacity: 750 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: No Platform dimensions (L × W): 4.50 × 2.36 m Tyre type: Non-marking CE certification: Yes Weight: approx. 9,000 kg Indoor / Outdoor use: Both (Indoor & Outdoor) === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Battery tested and in good working condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable electric scissor lift with high platform capacity and compact design. Ideal for indoor and outdoor applications where low emissions and quiet operation are required. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional technical assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales.

Condition: good (used), functionality: fully functional, Year of construction: 2020, load capacity: 600 kg, lifting height: 30,000 mm, lifting power: 600 kg/m, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, construction height: 3,190 mm, fuel type: electric, tire condition: 80 %, wheelbase: 4,870 mm, ground clearance: 200 mm, color: blue, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2020 Operating hours: On request Machine width: 1.39 m Drive system: 4x4 (4WD) with 4-wheel steering (4WS) Driveable at full height: Yes Extendable platform: Yes (1.90 m extension) Power output: Electric drive, 80 V / 560 Ah Working height: 32.00 m Platform capacity: 600 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: Yes Platform dimensions (L × W): 5.80 × 1.20 m Tyre type: Non-marking (solid) CE certification: Yes Weight: 21,500 kg Indoor / Outdoor use: Indoor & Outdoor === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Pgjdpfx Asx Nft Ioahsg Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Batteries tested and in good working condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from trusted sources, supported by professional technical expertise. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales logistics team.

Condition: used, Year of construction: 1990, color: yellow, mileage: 1,001 km, first registration: 01/1990, gearing type: other, total height: 46,000 mm, driver cabin: other, Vehicle location: Bovenden, Body: Hooklift frame approx. 4600mm. Year of manufacture cannot be determined as there is no type plate! Hooklift frame with preparation for salt spreader! Podpfx Aasx Nqyajhjgg Total length of the hooklift frame is approx. 4600mm! Length to reinforcement is approx. 4,300mm! Distance center-to-center of mountings approx. 2,750mm. ACCESSORY DETAILS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!