Used Ajce Ab-380F for sale (87,576)

Condition: new, Year of construction: 2024, General information Field of application: Construction Reference number: 10 Weights Empty weight: 1.000 kg Condition General condition: very good Technical condition: very good Bwjlq Roq Ixtxj Rfrol Visual appearance: very good Other information EPA Marked: yes Delivery terms: DAP, EXW Working pressure: 210 bar Required hydraulic flow: 90 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you all range of selector/ demolition/ sorting grab/ grabs/ grapples. All grapples with one year warranty. Contact us for details. We have grapples from 100kg to 5000kg. selectorgrab, selector grab, grapple, grapples, grappin, Schrottscheren, greifen, megragad, grajfer, PINZAS DE SELECCIÓN Y DEMOLICIÓN, PINCE DE TRI, KOCKÁZATKÖVEK, TORTAS DE CLASSIFICAÇÃO, PUNCTE DE SORTURI, Pinze Demolitrici, Selezionatrici, Pinces de Demolition, chwytaka, chwytak

Condition: new, Year of construction: 2023, General information Field of application: Construction Reference number: 15 Weights Empty weight: 280 kg Condition General condition: very good Technical condition: very good Bolq Roq Ixucj Rfrewl Visual appearance: very good Other information Fits to following machines: 4~7 ton Special for Backhoe Loader. Fits on JCB 3cx/4cx EPA Marked: yes Working pressure: 110-140 bar Required hydraulic flow: 70 l/min Additional information Please contact Ö. Inalkac for more information ABH-400M is a breaker for Backhoe Loaders. This model is included pins for JCB 3cx, 4cx and also for Hidromek backhoe loader! We can also supply pins for CAT and Volvo backhoe loaders. AJCE is looking for dealers! contact us for details. хидравличен чук hidraulinis plaktukas Hydraulikhammer marteau hydraulique BRH martillo hidráulico ciocan hidraulic hidraulikus kalapács hidraulični čekić martelo hidráulico hydraulické kladivo υδραυλικό σφυρί

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Bjlq R Rovwlqqsfrswl Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1986, Condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Bweljpitfxoq R Rfrsl

Condition: used, Year of construction: 1995, Functionality: fully functional, type of input current: AC, total height: 6,700 mm, total width: 2,400 mm, total length: 6,400 mm, input voltage: 400 V, ground cable length: 15,000 mm, overall weight: 5,000 kg, ESAB welding beam in perfect working order but without the welding machine. It is a welding beam with the horizontal arm movement, up/down and right left, the motorized carriage movement, but it is without generator and welding head. The machine is currently disassembled and is in the warehouse. Belq R Rjwd N S Rsfrswl

Condition: like new (used), Year of construction: 2011, operating hours: 74 h, Functionality: fully functional, machine/vehicle number: ACP101, overall weight: 90 kg, type of input current: AC, The pad printing machine was purchased in 2013 for printing on ball caps (knob-towbars) but unfortunately with limited sales. The machine has been idle since mid-2014. Bslqsvuymnj R Rfrewl

Condition: new, Year of construction: 2025, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Bwslqsfg Tats R Rfrjl Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Year of construction: 2023, Condition: new, A typical coating plant consists of surface pre-treatment (cleaning and / or application of a conversion coating), Intermediate drying, electrostatic coating zone ( booth / powder handling system ) and dryer ( egg oven ). The workpieces are transported through a conveyor system. Our company ROMER® plans, manufactures and assembles complete powder coating lines. Our plants can be visited and tested in Huerth near Cologne. Let us make you an offer for a plant tailored to your application. Bslq Rjcv Nl Rj Rfrjwl

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Bwjlevn Tg Isq R Rfrel Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1992, Condition: good (used), machine/vehicle number: KL950147, Max working pressure 7.5 bar Capacity m3/min 9.4 Speed of rotation 4170 rpm Motor power 55 kW Weight 970 kg Beleiv R U Tsq R Rfrowl

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, Functionality: fully functional, pressing force: 85 t, bale weight: 650 kg, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: Bwolq Rov T I Evs Rfrol The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1998, Functionality: fully functional, In Production SWEDEN; year: 1998 Belq R Rjv Ta Txjfrowl Size max: 1400×1100 mm Min size: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0.6-10mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour, The machine was technically sound at the time of dismantling. Cleaned. Dismantled.

Condition: new, Year of construction: 2025, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Bwolq R Ro Nn Hyofrsl Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: excellent (used), Here we offer you a plasma - discharge layering system. Bwslq R Rfsdz Achjrsl Plasma - discharge layering system solut Plasma plant for the decoating of DLC Vacuumrecipient 200 x 200 x 200 mm Microprocessor control for gas mixtures PC engine (industrial PC) and printer for process documentation Vacuum pump, Alcatel model ACP 28 Type: As 200 DLC Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, Functionality: fully functional, pressing force: 50 t, bale weight: 550 kg, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bjlq Reu Thhro Rfrswl Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partially overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 4 Weights Empty weight: 3.300 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 28-45TON EPA Marked: yes Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. Bwslqev Nhv Ho R Rfrol AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 200 x 200 x 100 [mm] - Max. load : 3 [kg] - Repeatability : +/- 0.1 [mm] WEIGHT & DIMENSIONS - Machine floor space : 480 x 584 [mm] Bjlq Rov N N Rls Rfrswl - Machine height : 797 [mm] - Machine weight : 23 [kg] EQUIPMENT - Control : ALPHA CP

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc option) CNC turning/milling center with tailstock, driven tools, and a 140 mm real Y-axis, 35° inclined bed, and linear roller guides Available in our showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 BMT55 stations 12 of which are driven Max. speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional: 254 mm) Spindle nose: A2-6 (optional: A2-8) Max. bar diameter: 52 mm (optional: 65, 75, and 91 mm) ) Spindle bore diameter 66 mm Direct drive power 22/30 kW Max. speed 4,000 rpm Tailstock diameter 110 mm/Mk 3 Tailstock travel 850 mm Dimensions (W x D x H) 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories Coolant system Warning light with 3 colors Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating instructions Incl. special accessories Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar feeder interface Video shows DT500 Bwolq Reqa Dtfj Rfrjl

Condition: new, Year of construction: 2025, Randek Work Table BS10U with clamping device and upraise function The Randek work table BS10U is an efficient tool for priducing pre-fabricated walls. pedestals and gables in wood frame or steel frame construction. The high quality of the finished building elements is achieved through the pneumatic press device, which guarantees the straightness of the building elements. Functional description The following workflows can be efficiently implemented with this workstation: • Laying out the frame construction • Clamping the frame construction by means of pneumatic clamping device Laying in the longitudinal sides of a polite rectangular unit. • Laying and clamping of plastic or paper sheets. Bslqsfg Tb So R Rfrewl Technical description • Length length 7500 mm / 9000 mm / 12000 mm • Width setting between 2250 - 3100 mm easily and manually • Clamping function, pneumatic, optional hydraulic • Hydraulic upraise up to 80 °. • Height of the abutment 160 mm. • The table is, as far as technically possible, fully paved with plywood. This makes it possible to put the frame designs directly on the work table. • The table consists of a stable steel structure. • The working height is an optimal 620 mm. • C-profiles in the longitudinal direction allow you to set stopps. • The table is ready for assembly and is easy to assemble. Safety • Equipped with emergency-off switch • CE compliant Advantages: • Rectangular construction components through clamping function • Controlled upraise of building elements • Ideal working height • Fast and efficient adjustable

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options Bslqevri Dds R Rfrjwl • Including haul-off • Including cooling bath

Condition: like new (used), Year of construction: 1989, Hydraulic press for bent glued parts Tuma FP120 Сharacteristic Table size, mm - 1400х600 Maximum opening size, mm - 1000 Number of upper cylinders, pcs - 2 Number of side cylinders, pcs - 2 Diameter of cylinders, mm - 160 Working pressure, Bar - 180-190 Year of manufacture - 1989 Bwelq R Rfjh Tffaorsl

Condition: new, Year of construction: 2024, Field of application: Construction Empty weight: 475 kg Reference number: 5 Fits to following machines: 6-10ton Delivery terms: EXW Working pressure: 130-150 bar Required hydraulic flow: 100 l/min Please contact Ö. Inalkac for more information Beloq Ixtmoq R Rfrswl AJCE Europe AS45H is 450kg grapple with hydraulic rotation. We have grapples available from 100kg to 400kg from our Netherherlands warehouse. Grijper, Pince de Tri, Greifer, Gripen

Condition: new, Year of construction: 2024, Field of application: Construction Empty weight: 110 kg Belq Req Ixtis Rfrswl Reference number: 10 Fits to following machines: 0.8-3ton EPA Marked: yes Delivery terms: EXW Working pressure: 110-140 bar Required hydraulic flow: 40 l/min Please contact Ö. Inalkac for more information AJCE AS10H Selector Grapple with hydraulic rotation. The weight of AS10H is around 110kg. Grijper, Greifer, Grappin, Gripen, Pince de tri

Condition: new, Year of construction: 2023, General information Field of application: Construction Weights Empty weight: 1.900 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18~28ton excavator EPA Marked: yes Working pressure: 320 bar Required hydraulic flow: 180 l/min Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Bolq R Rfjqmnbworewl Contact us for details. concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: new, Year of construction: 2025, General information Bwelqov Dtats R Rfrjl Field of application: Construction Reference number: 3 Weights Empty weight: 1.300 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18-28ton EPA Marked: yes Delivery terms: EXW Working pressure: 350 bar Required hydraulic flow: 250 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information ADC20 model is available from Netherlands. ADC20 model fits on 18-28ton excavator. Length of cutter: 1110mm Width of cutting head: 870mm Diameter of cutting head: 670mm Number of cutters: 48 pieces Rated Power: 80kW