Used Ajce Ab-350M for sale (12,344)

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 10 Weights Ijdpfsq Ixtxjx Abnetd Empty weight: 1.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-24ton excavator Delivery terms: DAP, EXW Working pressure: 210 bar Required hydraulic flow: 90 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you all range of selector/ demolition/ sorting grab/ grabs/ grapples. All grapples with one year warranty. Contact us for details. Also available as non-rotating version. We have grapples from 75kg to 2000kg in stock in our Netherlands warehouse. We can ship worldwide! selectorgrab, selector grab, grapple, grapples, grappin, Schrottscheren, greifen, megragad, grajfer, PINZAS DE SELECCIÓN Y DEMOLICIÓN, PINCE DE TRI, KOCKÁZATKÖVEK, TORTAS DE CLASSIFICAÇÃO, PUNCTE DE SORTURI, Pinze Demolitrici, Selezionatrici, Pinces de Demolition, chwytaka, chwytak

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 15 Weights Empty weight: 375 kg Functional CE mark: yes Itsdpfx Asq Ixucjbned Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 4~8 ton Special for Backhoe Loader. Fits on JCB 3cx/4cx Delivery terms: EXW Working pressure: 110-140 bar Required hydraulic flow: 70 l/min Strike count: 500-900 Production country: KR Additional information Please contact Ö. Inalkac for more information ABH-400M is a breaker for Backhoe Loaders. This model is included pins for JCB 3cx, 4cx and also for Hidromek backhoe loader! We can also supply pins for CAT and Volvo backhoe loaders. AJCE is looking for dealers! contact us for details. хидравличен чук hidraulinis plaktukas Hydraulikhammer marteau hydraulique BRH martillo hidráulico ciocan hidraulic hidraulikus kalapács hidraulični čekić martelo hidráulico hydraulické kladivo υδραυλικό σφυρί

Condition: good (used), The scope of delivery includes: Iedpfoi Euzdjx Abnstd 01x shelf connector, used Type of fastening: laterally to the shelf upright surface: sendz. galvanized total length: 450 mm for shelf distance: approx. 350 mm profile dim.: U 62 x 30 mm Weight: 0,84 kg | pcs.

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 3 Drivetrain Make of engine: Parker Weights Empty weight: 600 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-10ton Delivery terms: FOB Working pressure: 230 bar Itjdpoq Ixrwefx Abnjd Required hydraulic flow: 90 l/min Additional information Please contact Ö. Inalkac for more information AJCE ACR52H mini concrete crusser is 550kg and fits on 5~10 ton excavator. ACR52H is with hydraulic rotatio, double cylinder and speed up valve. Available from our Netherlands warehouse. vergruizer, pulverizer, crusher, Abbruchscheren, Betonpulverisierer, concasseur à béton, Betonbrecher, trituradora de concreto, дробилица за бетон, kruszarka do betonu, concasor de beton, betongkross, betonknuser

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 10 Weights Empty weight: 1.600 kg Functional CE mark: yes Other information Itedpfx Abeyuwtisnsd Fits to following machines: 20-30ton excavator Delivery terms: EXW Working pressure: 220 bar Required hydraulic flow: 60 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information AJCE Europe AS300H grapple is 1500kg and with hydraulic rotation. Standard with double engine, double cylinder and safety valve. It is reinforced model which is suitable for heavy demolition job. We have complete range of selector grapples available from 75kg to 2000kg in our Netherlands warehouse. Also available as non-rotating version! Feel free to contact us for details. We can ship worldwide. grijper, gripen, Pince de Tri, Greifer, Grapin,

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Isdeqa Dtfepfx Abnjtd Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface Video shows DT500

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Iodpfx Aspitfxsbnetd

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 2455698, power: 41 kW (55.74 HP), load capacity: 750 kg, mast type: telescopic, lifting height: 26,000 mm, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 18,000 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: diesel, color: red, Technical data Year of manufacture: 2010 Engine: Diesel Working height: 28.00 m Platform height: 26.00 m Platform extension: 2.13 m Platform dimensions (L x W): 5.48 m x 2.44 m Overall dimensions (L x W x H): 5.96 m x 2.50 m x 3.20 m Ijdpfeyqzrzsx Abnotd Load capacity: 750 kg Controls: Proportional Climbing ability: 40% Weight: 18,000 kg Travel speed: 0.7 - 4.0 km/h All-wheel drive General signs of use, fully functional

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: S 659, fully functional in good condition Iedsyr E Shopfx Abnjtd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, number of digital displays: 4, Equipment: cone bending device, emergency stop, hardened rollers, 3-Roller Hydraulic Plate Bending Machine with Digital Displays Manufacturer: ROUNDO Model: PASS 230 Year of manufacture: 1992 Machine No.: 925194 Itodpfx Ajyrh Edsbnod Max. sheet width: 2000 mm Max. sheet thickness: 8 mm Pre-bending: 6 mm 2 powered rollers Cone bending device Drop-end bearing Hydraulic adjustment of rollers Hardened rollers Emergency stop Manual sheet support via spindle

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2451648, load capacity: 600 kg, lifting height: 30,150 mm, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, Equipment: UVV, all wheel drive, Technical Data Itsdsyqzcajpfx Abnjd Year of manufacture: 2017 Motor: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25% Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2451638, load capacity: 600 kg, lifting height: 30,150 mm, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, operation weight: 21,500 kg, Equipment: UVV, all wheel drive, differential lock, Technical Data Itodpfx Ajyqytwobnsd Year of manufacture: 2018 Engine: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25 % Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Condition: new, Year of construction: 2026, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm Itjdpfxoq Ixuke Abnod AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: good (used), Year of construction: 2025, General information Field of application: Construction Reference number: 1 Itjdeym Agfopfx Abnsd Weights Empty weight: 1.650 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fits to following machines: 20-30ton Delivery terms: EXW Required hydraulic flow: 175 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information ASG300H 1650kg Atlas Scap Grapple/ Poliepgrijper with hydraulic rotation, 2x Parker motor, 5 forks, 5 cylinders.

Condition: new, Year of construction: 2026, Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! Iedpjym Abvsfx Abnetd DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile 40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Itsdsymmmpspfx Abned Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement Itodpet Irffefx Abnsd

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release Itodpfjyitvpox Abnjd The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Itodpfjxv Arxsx Abnod Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. Itodpfx Absykqxdened • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics Isdpfx Aeyhhgaobnjtd - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: used, For lye pastries, flammkuchen, pizza – without steam injection. We have 2 more for sale in the same version. From our own operation – used until recently, ready for immediate use, pick-up only – test run possible. Itjdpfx Ajyg N D Dobnsd

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Itjdpevri Ddofx Abnod Options • Including haul-off • Including cooling bath

Condition: excellent (used), Year of construction: 2012, operating hours: 95,000 h, functionality: fully functional, machine/vehicle number: Vers. J18 (adattato F12), fuel type: gas, power: 2,651 kW (3,604.35 HP), output voltage: 6,300 V, output frequency: 50 Hz, nominal power: 2,714 kW (3,690.01 HP), Currently operational until June 2026. Longblock replacement performed during major overhaul (68,000 operating hours). Upon disassembly, a minor overhaul will be required. Regularly maintained and covered by the supplier’s preventive and corrective service contract. The system is complete with: - heat exchanger for steam production (Siat 1,168 kW); - SEA transformer, 6,300 --> 21,000 V. Dia.Ne version: XT 3. Itodpfx Absrdx Ddonsd

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Iedpfoduub Uex Abnstd Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.