Used Optimum Opti B34 H for sale (130)

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 Fsdpjfbh Aksfx Abropn spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm table height / mm Fedsxbh Hfopfx Abrepn

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Fodpou Ixzbofx Abrjpn Change gears, machine feet, 1x fixed quill tip *

Condition: ready for operation (used), Travel X/Y/Z: 600mm/480mm/390mm, speed: 2550rpm, table dimensions X/Y: 900mm/500mm, max. table load: 360kg, feed rate: 600mm/min. Machine dimensions X/Y/Z: approx. 1650mm/1850mm/1900mm, weight: approx. 1900kg, digital display: Newall OP 700, documentation available. On-site inspection is possible. Fedpfx Abswn H Tyorspn

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Fpjdpfxswhxqwj Abren Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 106570506, throat depth: 250 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 120 rpm, total height: 1,700 mm, column diameter: 92 mm, total width: 720 mm, total length: 900 mm, spindle mount: MK 4, drilling depth: 120 mm, table width: 430 mm, table length: 480 mm, overall weight: 135 kg, type of input current: three-phase, input voltage: 400 V, Dear Sir or Madam, Fpjdpfjv T A Dmjx Abron We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales Fsdsucgr Ispfx Abrepn scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 28 mm bore capacity in steel perm. 24 mm spindle taper ISO 40 DIN 2080 Shank diameter 32 mm Fsdexgu Imepfx Abrspn quill stroke 115 mm x-travel 500 mm y-travel 250 mm z-travel 541 mm turning speed range - spindle 115 - 3.100 U/min transmission ratio 3 transmission ratio 1 115 - 600 U/min transmission ratio 2 270 - 1.400 U/min transmission ratio 3 590 - 3.100 U/min motor 2,2 kW table surface area 850 x 240 mm T-slot - width 18 mm T-slot - distance 80 mm weight of the machine ca. 480 kg dimensions of the machine ca. 1,4 x 1,1 x 2,5 m Drilling and Milling M/C OPTIMUM - OPTImill BF 46 Vario - incl. OPTIMUM base cabinet

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, total height: 2,200 mm, total width: 1,860 mm, total length: 2,164 mm, table width: 320 mm, table length: 800 mm, type of input current: AC, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10 rpm, table load: 300 kg, overall weight: 2,800 kg, Equipment: documentation/manual, Fully functional milling machine with numerous accessories and manual. Fpodpfx Abew U Rdnjren

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Fodpfjv Sg T Njx Abropn Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Fpodpfxovvi Aue Abren

Condition: good (used), Manufacturer: Optimum Fedpordgrksfx Abrepn Type / Model: DDP 50 Pressing force: 1.5 t Table: mm ram: 50 x 50 x 647 mm Projection: 226 mm Lever length: 850 mm Plunger stroke: max. workpiece height: 459 mm Accessories/equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover Fedpfxsk Egrpj Abrspn - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm Fsdpfoww Nb Sex Abrspn max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - alternative configuration available, optional and on request !

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 28 mm Fedpfx Aboxh Swnjropn throat 200 mm bore stroke 105 mm table surface area 360x340 mm Distance spindle/table max. 540 mm turning speed range - stepless 120-3000 U/min

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet Fjdpfov Sdz Rjx Abropn

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5kW Speed range: 300 - 4000 rpm Fpedehpmbbspfx Abrjn Speed steps: stepless spindle mounting: MK-3 Drilling stroke: approx. 105 mm spindle throat: 200 mm Weight: 152 kg

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 Fedpfx Absxbtrgsrepn table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: new, turning diameter 360 mm turning length 1000 mm swing diameter over bed slide 360 mm Fpjdpfx Abow U U Tmerjn centre height 180 mm turning speeds 70-2400 U/min total power requirement 2,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 2000x1500x900 mm

Condition: used, Year of construction: 2022, cutting diameter max. 225 mm saw band length 2.480 mm width of saw-band 27 mm Fpsdpetqmm Sofx Abron dimensions of saw-band 2.480 x 27 x 0,9 mm cutting angle 0 - 60 ° band speed 45 / 90 m/min Cuttingrange 90° max. 225 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 150 x 245 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 120 x 90 mm capacity 45 degrees: round 145 mm capacity 45 degrees: square 150 mm capacity 45 degrees: flat 190 x 150 mm total power requirement 1,3 kW weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 2,0 x 2,0 m Metal Bandsaw OPTIMUM - OPTIsaw S 275 N - NEW-MACHINE

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Lead and Feed Screw Lathe OPTIturn TH 3309D Year of manufacture: 2024 Condition: as new, workshop-inspected Delivery time: immediately available Technical Data Center height: 165 mm Center distance: 830 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 208 mm Turning length in bed gap: 430 mm Spindle speed ranges: 16 steps, 70–2000 rpm Drive motor: 1.5 kW, 400 V, 50 Hz Spindle mount: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle taper: MT5 Tailstock quill: MT3, quill travel 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Threads and Feeds Metric: 0.4–7 mm/rev (26 threads) Imperial: 56–4 TPI (34 threads) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Fpedjxgbbaopfx Abrjn Cross feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed steady rest (Ø 6–50 mm) Travelling steady rest (Ø 8–30 mm) LED machine lamp Reducing sleeve MT5/MT3 Two fixed centre points MT3 Multifix tool holder Change gear set Machine base Initial fill with quality oil Operating tools Subject to errors and input mistakes!

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Fpedpjgulr Hsfx Abren Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg Fjdpoxaamnjfx Abropn dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3501100, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 10 m/min, TECHNICAL DETAILS Travel Paths X-axis travel: 550 mm Y-axis travel: 305 mm Z-axis travel: 460 mm Main Spindle Main spindle speed range: 10 - 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable Clamping surface: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 - 600 mm Tool Changer Number of tool stations: 12 Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feed Rates Rapid traverse (X / Y / Z): 10 m/min Feed rate: max. 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm MACHINE DETAILS Control: Siemens Sinumerik 808D adv. Space & Weight Required space approx.: 3.5 x 2.5 x 2.4 m Fodpfx Abexb Aczerjpn Machine weight approx.: 2,800 kg Total power requirement: 15 kVA EQUIPMENT Documentation Chip removal system Coolant system Tool changer RENISHAW - Primo touch probe

Condition: new, Year of construction: 2025, Power: 750 W / 400 V Drilling capacity steel: 25 mm Speed range: 60 - 3050 rpm Speed levels: 12 infinitely variable levels Spindle holder: MK3 Quill stroke: 95 mm Spindle projection: 209 mm Table size: 308 mm x 308 mm Fpedpfjir Embsx Abren Quick-action chuck: 1 - 16 mm Weight: 107 kg