Used Bimak 35 Mt/C for sale (37,339)

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Nsdpewvr H Usfx Af Sowr Protection class: IP 54 Sound pressure level

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Speed: 2840 rpm -Shaft: Ø 30 mm Nwjdpfxsctq Nxs Af Sor -Construction: B5 -Protection class: IP 44 -Dimensions: 560/250/H215 mm -Weight: 55 kg

Condition: excellent (used), Here we offer you a climatic test chamber. Water cooled Test chamber volume 350 liters Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm Outer dimensions: Height 1800 mm Width 850 mm Depth 1640 mm Temperature working range: Temperature range -70°C/+180°C Nwedpfoi Tw Uvex Af Sjr cooling speed: 3,0 K/min heating speed: 5,0 K/min Climate working range: Temperature range +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Temperature deviation ±0.1 - ±0.3 K temporal Humidity deviation ±1 - ±2 % r.h. temporal up to 90% r.h. max. ±1 - 3 % r.h. time above 90% r.h. Electrical connection: 400V +6-10 %, 3/N, 50Hz connected load: 13 kW rated current: 25,5 A Refrigerant: R404A / R23 Weight: 650 Kg Type: CS-70/350 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Type: C-40/350 Nwsdpeg Sr Egjfx Af Ser CTS air-cooled temperature test chamber Test chamber volume 350 liters Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm External dimensions: Height 1800 mm Width 850 mm Depth 1640 mm Design: Floor-standing appliance Temperature working range: Temperature range -40°C/+180°C Cooling speed: 4.0 K/min Heating speed: 3.0 K/min Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Condenser refrigeration machine: Air-cooled Refrigerant: R-404A Weight: 550 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Nodpfx Astunccef Sowr Out of serial production *

Condition: used, Year of construction: 2015, operating hours: 1,748 h, 2015 | Nissan Cabstar 35.12 Multitel MT 162 EX (16m) | Used Truck-Mounted Boom Lift | 1748 hours | 13870 kms 📍Location: Germany, Idstein 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Nodpjx N Df Ajfx Af Sjwr 💰 Buy Now for EUR 32900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 53 inspection points 50 approved ✅ 0 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Overall good condition however the telescopic boom could not be tested due to the sensor issue. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39765 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2010, load capacity: 3,500 kg, lifting height: 6,000 mm, fuel type: diesel, construction height: 2,637 mm, Equipment: cabin, head guard, Diesel forklift truck, mast type: Triplex, roof cover, half-cab, windshield wipers, exterior mirrors, lifting height approx. 6000 mm, overall height: 2637 mm, free lift: 2184 mm, sideshift, fork length: 1200 mm, load capacity approx. 3500 kg, work lights, front, rear, rotating beacon, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Nwodovnqfhepfx Af Ser

Condition: new, Rexroth M-3 SED 6 CK13/350 C G24 N9K73 L seat valve R901257167, unused, 100% functional, scope of delivery as per photos Nwedpfsi Eczrjx Af Ssr

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale: 3+2 axis machining center by DMG, model DMU 35 M This machine comes from an educational institute and was primarily used for training in control operation and setup. Note the exceptionally low spindle hours. Technical specifications: Nwedex Aiiqopfx Af Ssr Year of manufacture: 2009 Spindle hours: 625 Machine no.: 18065358844 X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servomotors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized Europe-wide upon request and at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Nedpfxsx Ng A Ro Af Sewr Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, Control Unit Brand SIEMENS Model 840 D Nwsdex D Skmepfx Af Ssr Main Drive Spindle speed range 12000 Additional Equipment Pallets: 22 of size 800x800 It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Application Types Milling

Condition: excellent (used), functionality: fully functional, saw band length: 4,160 mm, total height: 34 mm, BEKA-MAK 325 AUTOMATIC BAND SAW -TWIN-COLUMN DESIGN -330 MM SHAFT CUTTING DIAMETER Nsdpfex Izx Rjx Af Sjwr -PACKAGE FEED ROLLER -DIMENSIONS 330X400 -AUTOMATIC ROLLER FEEDER -COOLANT PUMP -INFINITELY VARIABLE BAND SPEED (inverter) 20>100 m/min -COMPLETE ORIGINAL DOCUMENTATION -BAND 4160X34X1.1 -MACHINE WEIGHT 960 KG Transport available at extra cost. -Net price for export. The machine is in excellent technical condition (like new), ready for work. Can be inspected in Głosków near Warsaw.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2019, operating hours: 1,630 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 8.775 kg Njdpfx Afox Nl Hbe Sswr Chassis type: rigid Lifting capacity: 3.500 kg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: ready for operation (used), Heidenhain LE 335 C central control unit. 246 819 99 SN:2762213, professionally completely overhauled and tested with 6 months warranty, 100% functional, delivery scope as per photos. Njdpex Er A Ijfx Af Sewr

Year of construction: 2019, operating hours: 2,108 h, condition: excellent (used), General information Field of application: Construction Njdpfx Afjh E Svls Sswr Technical information Power: 205 kW (279 HP) Empty weight: 32.800 kg Make of engine: Isuzu Condition Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Undercarriage condition: 100% Output of the auxiliary hydraulics: 380 l/min Delivery terms: EXW Additional information Please contact Dział Sprzedaży for more information

Condition: new, The ABS 350 C, an advanced Horizontal Mitre Cutting Bandsaw from KNUTH, stands out in the Auto Miter Bandsaws category for its robust design and automated efficiency. This fully automatic band saw offers reliable performance for both single piece and series production. Engineered with a heavy machine frame and high-quality components, it delivers precise cuts with excellent stability. Its integrated feed rollers in the clamping jaws allow for seamless material handling, while the angle cutting feature expands its versatility for various applications. Operating the ABS 350 C is straightforward thanks to its user-friendly touchscreen control panel, which facilitates automated programming. Additional features such as manual top vise functionality, efficient chip management, and an option for a Minimal Quantity Lubrication system enhance its operational capabilities. Whether you are looking for a dependable tool for solid materials or profiles, the ABS 350 C is designed to meet the rigorous demands of the industrial sector. To explore more about this model, ensure to request a quote today for your Horizontal Mitre Cutting Bandsaw needs in the Auto Miter Bandsaw group. Nodpfx Aen D Eizjf Sjwr

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 710 mm Measurements depth 1565 mm Measurements height 1385 mm Machine weight 350 kg Main Drive Spindle speed range 1500 - 3000 Media Njdox D Hk Uepfx Af Sswr Power consumption 700 W This HOFMANN GMT 35 grinding machine was manufactured in 2022. It operates on a 230 V AC supply, with a power consumption of 700 W. Features include a speed range of 1500 - 3000 min⁻¹, a water tank volume of 45 l, and a trough volume of 35 l. Dimensions are 1565 mm in length, 710 mm in width, and 1385 mm in depth, weighing 350 kg. Contact us for more information about this machine. Application Types Grinding

Year of construction: 2019, condition: like new (used), The lineis in the Poland, working, connected, right away to sell. General data Category of technical measure equipment/production line Type of technical agent polystyrene forming line Nsdpjhutdkofx Af Sewr Manufacturer ERLENBACH MASCHINEN GmbH Model, Type EM MOTION Press: EHV-C-E 01 1485/1285; Vacuum unit: EV350 L DN 125 Mileage 9,164 duty cycles (556 rbh) Year of manufacture 2019 Technical parameters Equipment Vacuum unit Erlenbach EV 350L DN125 Power supply: AC 400/415V, 50Hz Dimensions: (L x W x H) 2350 x 1060 x 1190 mm Weight: approx. 700 kg. Number of vacuum pumps: 2 Number of water pumps: 1 Water consumption: 300 l/h Capacity: up to 1.9 m2 of mounting surface Vacuum pressure: 0.8 bar Thermoforming press Erlenbach EHV-C-E 1485/1285 Power supply AC 400/415V, 50Hz Dimensions: (L x W x H) 4270 x 3600 x 5620 mm Weight: approx. 12000 kg. Max. fitting size: 1485 x 1285 mm Max. fitting depth 180 mm Flange dimension of fixed/movable side 1560 x 1360 mm Working pressure: max. 1.6 bar Machine stroke: 800 mm Machine movement: 2x 6.9 kW electric motor Ejector: 4.2 kW electric motor Description of the operation, A line for the production of molded parts from EPS, EPP, EPE material consisting of an automatic press for fittings and a vacuum unit. The vacuum unit foams and feeds the finished raw material to the press which forms it using heated dies (molds) into ready-made moldings.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2019, operating hours: 1,940 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 8.775 kg Chassis type: rigid Lifting capacity: 3.500 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Nedpfex Izk Hjx Af Sswr

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet - three-phase servo motor, SN:68352, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please enquire separately!,ATTENTION: Costs for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Nwedpfx Afoi D Ii Ij Sjr

Condition: ready for operation (used), Siemens 6FC5357-0BA21-1AE1 NCU 572.2 Version: C SN:T-K42046827, used, normal signs of wear, 100% functional, delivery as shown in the photos. Nwsdpfx Afsx Dxbfo Sor

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Permanent magnet three-phase servo motor, hole spacing of the mounting holes: 152x152 mm, drive shaft diameter: 32 mm, used, normal signs of use, 100% functional, shipping costs please inquire separately! Please ask for transport charges! Nwedoi D Ii Dopfx Af Ssr

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-56032, used, strong signs of use, 100% functional, scope of delivery as per photos Nedpoi D Im Sefx Af Sewr

Condition: ready for operation (used), Rexroth MAC071B-0-TS-3-C / 095-A-1 / S001 permanent magnet motor MNR: R911224309, SN:MAC071-43580, used, strong signs of use, 100% functional, scope of delivery as per photos Nsdpfx Asi D Nfmof Sewr

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet three-phase servo motor, SN:35588 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Price please ask separately! Nsdpoi D Ig Eefx Af Sewr