Used Weiss Fs 1050 for sale (129)

Condition: used, Weiss Type: WK1/1500/40 Weiss Climate Test Chamber, Air-Cooled with Humidity Control (converted to use refrigerant R-452a) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature range: +10°C to +95°C Humidity range: 10% to 98% r.H. Temporal temperature deviation at center of test space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Heat compensation In the range of +25°C to +95°C, at a relative humidity up to 90%: 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test volume: approx. 1540 liters Test chamber lighting: Halogen bulb 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW, Rated current: 22.0 A Fuse on site: 32A slow-blow Lrsdpfow Hcttox Aa Eol Protection class (control cabinet and operator panel): IP 54 Refrigerant: R-452a Weight: 920 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Ledpfx Aajxbd Rae Eerl Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Lredpfjxdl Ixjx Aa Esl Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: used, White Type: TS 130 Temperature shock test chamber water-cooled Specification: Temperature range hot chamber +60°C … +220°C Temperature range cold chamber -10°C … -80°C Switch between hot and cold chambers 10 sec. Temperature stability ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge) without....approx. 1820 mm with....approx. 1850 mm Depth (without and with test chamber door) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket (test room) height 450 mm, width 500 mm, depth 600 mm Volume 130 liters Test room load max. 20 kg Test room floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device approx. 65 dB(A) Water-cooled cooling cascade Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current 26.0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See picture) Lodsvwckhjpfx Aa Esrl (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: excellent (used), White Temperature Cabinet Air cooled Here we offer a Weiss temperature cabinet. Weiss Temperature Cabinet With S!MCON / 32-Control Test chamber capacity : approx. 195 litres Test chamber dimensions: Height 750 mm, width 580 mm, depth 450 mm, outside dimensions: Height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation in time in useful space center: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant : R404 A 2,5 kg Weight : 490kg Type: WT3 - 180/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Ljdpfxegmhrfo Aa Eerl Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Cabinet Water Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Lrodolmkn Tjpfx Aa Esl Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Weiss Type: WK3-600/70 Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Lredpfxow Inmmj Aa Ejl Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatially: ±0.5 to ±1.5 K Heat compensation max.: 2,500 W Specifications for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % rH Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % rH Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation max.: 500 W Test chamber volume: 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1,998 mm, Width 1,000 mm, Depth 1,745 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R404A & R23 Weight: 680 kg Important information for you as the buyer: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Ljdpfxexg Hrks Aa Esrl Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Lredpfov Sr Hzox Aa Eol We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min Lsdpfx Aaexr A R Ts Ejrl In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Ljdpfx Aeq Dpzyoa Ejrl We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss temperature chamber Here we offer Weiss temperature chamber. Converted to R452a Weiss temperature chamber air cooled Temperature range: from - 30°C to 180°C Temperature change rate cooling 1,6 K/min Temperature change rate heating 2,1 K/min Test chamber dimensions: Width 550 mm x depth 750 mm x height 800 mm Housing dimensions: Width 800 mm x depth 1500 mm x heights 1800 mm Lodpfx Aeic Rgfja Esrl Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4,9 kW Rated current 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For you as a buyer the following information for safety! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Ledpfsrbigfsx Aa Eorl Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Type: CR0900S-88 Serial number: CR416156 Gear ratio: 312:1 Speed: 9.6/min Torque: 13000 mm Year of production: 2022 Weight: 806 kg Lodpsv Tbx Aefx Aa Eorl Country of production: Germany

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min Lsdpfxsx Hxkzo Aa Eorl - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: new, WEISS 174282-014 spindle, dimensions see acceptance protocol, unused in opened original packaging, 100% functional, scope of delivery as per photos Lrsdpfoxtwb Njx Aa Esl

Condition: used, WEISS MAIN SPINDLE 1P JBD:168347 Ledpfxsvr E Dgs Aa Eorl The article is used, comes from an industrial machine dismantling and was in operation until it was reassembled. Please note that this is a sample image, which may have different signs of use and/or software stocks. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for description purposes only. You can find more information on our homepage *

Condition: used, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 6 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:6 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 0x60 mm Workpiece headstock: Speed:1 rpm Workpiece weight max.:25 kg Sanding diameter max.:390 mm Mounting:MK4 Lrsdpjv Armcofx Aa Esl Grinding headstock: Peripheral speed:2 m/s Grinding disc dimensions right:0 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:1,1 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter: mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Lredjxzprcspfx Aa Esl Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lrsdpfx Aajx Evbne Ejl

Condition: excellent (used), Weiss Lodpfx Asxxuytja Eerl Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Ledpfx Ajx Dxq Tsa Eerl

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Lrjdpfx Aoph U Ayoa Esl Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Lredpfsxbgrgox Aa Esl Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Lodeph U Dhopfx Aa Esrl Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!