Used Weiss Fs 1050 for sale (135)

Condition: used, Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Gsdpsziizmsfx Actokd Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. Gedozn U A Tepfx Actekd The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Temperature range: -40°C to +180°C Humidity: 15% to 95% Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!

Condition: used, Year of construction: 2020, grinding diameter 390 mm grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec Gksdpsx Rn Uqjfx Acted workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW

Condition: used, External dimensions (L x W x H) 3,000 x 850 mm x 1,970 mm, Internal dimensions (L x W x H) 1,990 x 750 mm x 1,400 mm, Usable area 1.5 m², Growth height 1.4 m, Gkjdjz Eup Ejpfx Acted Temperature range from approximately 5°C to +45°C, Adjustable humidity from 40% to 95%, 2 units in stock.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Gkodozii Akspfx Actsd Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Gsdpfxezil T Ej Actskd Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WT1-600/70 Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT1-600/70 External dimensions (without hinges and door closure) Gsdpfozd R Svox Actokd Height 1980 mm, Width 1085 mm, Depth 1655 mm Internal dimensions Height 950 mm, Width 800 mm, Depth 800 mm Test chamber volume: approx. 600 liters Cold/heat operation: -70 to 180°C Temperature change per unit of time Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible weight of test specimens Total load on the shelf supports: 80 kg Refrigerant: R 404A + R23 Weight: 600 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Godpfjzd R Drex Actjkd Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards Gksdpfoziiz Hjx Actjd (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK 27'/50-150 Water-cooled climate chamber Technical data: Test chamber designation: WK 27'/50-150 External dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control cabinet dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load 30000 N/m³ (surface load) Test chamber volume: approx. 27000 liters Gedpfx Aszizhfjctekd Test specimen mass 1000 kg Cold / heat operation -50°C to 150°C Heating 1.0 K/min Cooling 1.0 K/min Temperature stability +- 0.3 to 1.0 K (over time) Temperature stability +- 0.1 to 0.5 K (over time) Climate operation 10 – 90°C Humidity 10...98 % RH Temperature stability +- 0.1 to 0.5 K (over time) Dew point range +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerant R23 and R404A With extra floor plates to increase the floor load For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2013, condition: used, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Usable Volume: nominal 1,200 liters Interior Dimensions: 1310 x 675 x 1410 mm (W/D/H) External Dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber designed specifically for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable area with minimal space requirements. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4°C. Usable Volume: The chamber has a nominal volume of approx. 1,200 liters. Gedpfoyu Svlex Actekd Maximum Growth Height: Without shelves, the maximum growth height is up to 1,275 mm (depending on the specific LED or lamp configuration). Footprint: With a depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Used item as shown in the pictures. Please contact us if you have any questions.

Condition: used, Weiss   Type: WT11-1000/40   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -40°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min   Heat compensation max. 4500 W   Feedthroughs installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Gjdpfozfzamox Actskd Total load of the shelf supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 840 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Gkedpfszfy Rwjx Acted Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Year of construction: 2013, condition: used, Rotary Indexing Table Rotary Table Rotary Drive Welding Positioner Positioning Table WEISS Gkjdpexdv N Hofx Acted TYPE: CR700 CAA Year: 2013 Rotary indexing table/positioning table with control cabinet including frequency inverter and PILZ PLC control. Diameter of mounting plate approx.: 700 mm Diameter of inner collar approx.: 320 mm Height without base approx.: 290/320 mm Base diameter approx.: 1600 mm Base height approx.: 190 mm Max. dynamic axial force: 70,000 N Weight approx. 585 kg plus base There are 4 pieces of these rotary drives from Weiss available. For further details or purchase of multiple rotary drives: Please enquire.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Gksdpfszachcox Actsd Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Loading hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main engine: 45kW - Pump engine: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen size: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Net price: 129,900 PLN Net price: 30,209 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR Gedpfx Aozrna Hsctokd (price may change in case of significant exchange rate fluctuations)

Condition: used, Rotating table, welding rotator, rotating workpiece table, Used machine Manufacturer: Weiss GMBH Type: TC 150-08 Overall dimensions: Width: 400 mm Depth: 320 mm Height: 130 mm Electrical data: 400V, 0.11kW Gjdpfxe Ahym Aj Actskd Table size: Ø 320 mm

Condition: used, Weiss Climate testing chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours 3577.95 h. For sale is a high-quality climate testing chamber of the type ClimeEvent C/1000/70/5. The device is used in industry, development, and quality assurance to test components and products under extreme temperature and climatic conditions. The chamber enables realistic simulations of environmental conditions – from extreme cold to high temperatures and humidity levels. Ideal for electronics, automotive, material testing, and research. The device operates reliably and reproducibly and is designed for long-term tests and tests in accordance with standards. With this climate chamber, temperature and humidity conditions can be specifically set and controlled. This allows the aging, stress, and function of components to be tested under real environmental conditions. Typical applications include temperature cycling tests, climate tests with humidity, and endurance tests. Due to the rapid temperature change (up to approx. 5 K/min), accelerated tests are also possible. Technical data: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10 % to 98 % RH Internal dimensions (test chamber): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Gkedpfx Acsy Iyx Ajtjd Power connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerant: R449A / R23 Weight: approx. 1300 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Gsdpezg Tn Ejfx Actokd Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability The time-related temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss Type: WK-480/40/10 Water-cooled climate testing chamber Test chamber lighting: Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate: Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8000 W Heat compensation at -20°C: 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Godpfx Aozgaipectjkd Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A, Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Temperature testing chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h   For sale is a used temperature testing chamber from Weiss Technik. The testing chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging).   Explanation of the designation: T = Temperature testing chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) e = energy-optimized version 5 = Temperature change rate (series)   Equipment: Stainless steel interior Circulation fans Touch operation (WEBSeason) Viewing window Temperature control automatic / manual   Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C   Temperature change: Cooling approx. 6 K/min Heating approx. 8 K/min   Gkedpsy El Ttsfx Actsd External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D)   Connection: 3/N/PE AC 400V =10% 50Hz Rated current: approx. 34 A Power: approx. 21 kW   Refrigerant: R449A / R23   Weight: approx. 1200 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT-1000/70/5   Weiss temperature testing chamber, water-cooled With a temperature change rate of 5 K/min   Data for temperature tests: Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K   Temperature change rate: Heating: 6.1 K/min Cooling: 6 K/min   Permissible test specimen weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg   Dimensions: Gsdoy D Nyuepfx Actokd Test chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm   Test chamber volume: 990 liters   Data for operation: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Nominal current: 38 A Nominal power: 26 kW Refrigerant: R404 / R23 Weight: approx. 955 kg   Information for buyers: To ensure the safety of our customers, the following work will be carried out on the offered climate chambers in advance:   1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Gjdpo Af Ig Asfx Actskd Vötschtechnik ClimeEvent C/480/70/15 Temperature and climate chamber, water-cooled Approx. 480 liters / -72 °C to +180 °C / 10 to 98 % RH For sale is a used climate chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. The integrated touchscreen control allows temperature and humidity profiles and automatic test programs to be created and executed. Existing test programs include tests according to IEC 60068, among others. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Device type: Climate chamber / Temperature chamber Test chamber volume: approx. 480 liters Country of manufacture: Germany Temperature range: -72 °C to +180 °C Temperature change rate heating: approx. 17 K/min Temperature change rate cooling: approx. 21 K/min Max. heat compensation at +20 °C: approx. 8,000 W Temperature homogeneity spatially: ±0.5 to ±2 K Temperature gradient up to +180 °C: ≤2 K Climate range temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C -3 °C to +4 °C discontinuous Humidity range: 10 to 98 % RH Humidity deviation over time: approx. ±1 to ±3 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 4.00 kg / 2.30 kg GWP: 1,397 / 14,800 CO₂ equivalent: 5.59 t / 34.04 t Max. operating pressure ND/HD: 19 / 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 43 A Cooling Water-cooled design Cooling water supply and cooling water return available Connection for demineralized water Overflow and condensate drain Dimensions and weight Test chamber volume: approx. 480 liters External dimensions according to installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Weight according to series documentation: approx. 1,350 kg Equipment Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Large viewing window Test chamber lighting Several shelves / insertion levels Water-cooled design Side test chamber openings Safety temperature limiter RS232 interface RS485 / RS422 interfaces USB interface Status, alarm and maintenance display Operating hour counter Program management and reporting function Areas of application Temperature testing Climate testing Environmental simulation Humidity testing Material testing Electronics testing Component testing Quality assurance Research and development Aging and stress tests Condition Used Workshop inspected Optical condition according to pictures Scope of supply 1x Vötschtechnik ClimeEvent C/480/70/15 climate chamber Shelves according to pictures Existing documentation / operating manual Accessories according to pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or forwarding possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. Gjdpfxjni Awpo Actskd The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. All documentation is available.

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device Gkjdpfx Acexmurxsted - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive