Used Bens 250 for sale (11,768)

Condition: ready for operation (used), Heidenhain LS 487 linear scale ML 120 mm Id. 572 250-02 SN:76626101N + AE LS 487 scanning head Id. 1199654-02 SN:76314222F, used, in good condition, 100% functional, scope of delivery as per photos. Pjdpex Er E Nefx Amusgn

Condition: ready for operation (used), Heidenhain ROD 250 18000 . 21311601 Serial number: 3654376C / L3, fully refurbished with 6 months warranty, 100% functional, delivery as per photos. Pedoy Nqn Djpfx Amujgn

Condition: ready for operation (used), H & B / S & F AVL 220 Electric Transducer, measuring range 0-250 mbar, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Psdpfxji Eac Ns Amuegn

Condition: ready for operation (used), Indramat RAC 2.2-250-380-A00-W1 main spindle drive SN:232713-05451, used, normal signs of wear, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Psdpfx Amox Dw H Heuogn

Condition: new, Heidenhain LS 487 : 572 250-59 linear scale ML 270, serial number: 43630711K with Heidenhain AE LS 487 : 594875-02 reading head SN: 43587982 D / 5.0ML/2.. B 09A 4ZS14~1Vss 2F01.., unused in opened original packaging, 100% fully functional, delivery scope as per photos. Pedpfx Aox Er Haemuegn

Condition: ready for operation (used), Heidenhain ROD 250 6000 . 213 116 54 S.Nr. 3 968 067 D, cable length 1 meter, used, with minor signs of wear, 100% functional. Delivery scope as per photos. Pgedsx Er Rxjpfx Amujn

Condition: ready for operation (used), Heidenhain ROD 250-18000 rotary encoder ID: 213 116 45 SN: 4556768E – cable length: 1m, used, in good condition, fully functional, delivery scope as per photos Pedpfx Aox Er R Eomujgn

Condition: ready for operation (used), Festo EGSL-BS-55-250-5P / 562229 linear actuator, serial number: 12081, used, in good condition, 100% functional, delivery as per photos. Podpfex Erndjx Amuogn

Condition: ready for operation (used), Heidenhain TE 400 control panel ID: 250 517 SN: 4648841, used, in good condition, 100% functional, delivery as shown in the photos. Pgjdpfoy Nqtyox Amuon

Condition: ready for operation (used), Heldt & Rossi SM 804/805 DC series, DC servo amplifier, type 250-30, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgsdpfxji Ea D To Amuen

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump, 250 L/min. No. 001, serial number as shown in the photo, unused, 100% functional. Scope of delivery as shown in the photo. NOTE: Please request a separate quote for packaging and shipping costs! Psdpfx Amsi D Hkbjusgn

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as shown in the photos. Pjdpfx Aji D Ulyemuegn

Condition: excellent (used), Year of construction: 2006, Travelling-column vertical machining centre with linear motor X-axis Control: Heidenhain iTNC 530 (3D path) Travels: X 2,500 mm / Y 920 mm / Z 820 mm Pgedpfx Asy Skmremusn Spindle: 20 – 18,000 rpm · HSK taper

Condition: used, Year of construction: 1963, Single-column hydraulic press MÜLLER ZE 250/300-12.5 1.3-U, No. 586, year of manufacture 1963, pressing force 250 t, working area 1,300 x 1,100 x 1,000 mm, retrofitted with ROMA safety roller door (year of manufacture 2012) Psdjyhqqnjpfx Amuogn

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 505591, SCHMALZ Vacuum Lifter Lifting capacity: 250 kg Podpfjzhigmex Amuogn Maximum panel dimensions: 560 x 250 cm

Condition: used, mileage: 699,349 km, power: 184 kW (250.17 HP), first registration: 10/2014, fuel type: diesel, tire size: 245/70 R17.5, axle configuration: 4x2, wheelbase: 4,650 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,500 mm, total width: 2,600 mm, total height: 3,650 mm, Year of construction: 2014, Equipment: electric window regulation, power mirror, spoiler, tail-lift, = Additional options and equipment = - CD player - Roof spoiler - Reversing camera - Headlights - Sun visor - Alternating current - Toolbox = Further information = Tyre size: 245/70 R17.5 Brakes: Disc brakes Front axle: Steering; Tyre tread left: 10 mm; Tyre tread right: 10 mm; Suspension: Leaf spring Rear axle: Dual tires; Tyre tread left inner: 10 mm; Tyre tread left outer: 10 mm; Tyre tread right inner: 10 mm; Tyre tread right outer: 10 mm; Suspension: Air suspension Unladen weight: 7,875 kg Payload: 4,115 kg Gross vehicle weight: 11,990 kg Damage: none Podpfx Amozgmw Hsusgn

Condition: used, mileage: 746,000 km, power: 184 kW (250.17 HP), first registration: 01/2002, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, Year of construction: 2002, Front axle: Steered Rear axle: Double tires Pgedpfxjzgl Hme Amujn Damage: none

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) Psdpfx Amjy N Spceuegn • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Podpfxjzg Ti Ns Amujgn Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: new, Storage platform on request! Load capacity 250 - 1000 kg/sqm Why storage platforms from BLT Lagertechnik? - We are a family business: Long-term partnership is our goal. - We are the specialist: We realize all spans, loads and degrees of complexity. - We care: Our cold-formed system is the most sustainable solution there is. Included in the scope of delivery : - Supports - main beams - secondary beams - floor covering - Assembly material and assembly/installation instructions Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Pgjdpfjzg Dgfsx Amujn Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. Pgjdpfx Amjzg A Uzsuen - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), machine/vehicle number: 0107, Year of construction: 2008, Cummins QSB 8.3 250 from Uniktruck Pgjdeyug Uiopfx Amujn

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine Pgsdox A D H Rspfx Amujn year of manufacture: 2012 max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation machine is powered on for inspection

Condition: as good as new (ex-display), For sale: adapter plate, top plate, Lehnhoff VL 210, 250, with Atlas Copco/Epiroc MB1200 mounting pattern. Pedezhhdwepfx Amusgn 12 holes, diameter 33 mm. Mounting pattern in the attachment. Connections for supply and return lines, leak oil. Suitable for separators, milling machines, hammers, etc. The top plate has not yet been used in operation. It was only mounted once on a separator for a trade show.

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: DHD/250/100, functionality: fully functional, input voltage: 400 V, pressing force: 250 t, stroke length: 600 mm, operating speed: 170 mm/s, reverse speed: 250 mm/s, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 1,200 mm, ram plate length: 1,000 mm, total length: 2,000 mm, total width: 2,700 mm, total height: 4,500 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, die cushion stroke: 200 mm, electrical fuse: 63 A, installation height: 900 mm, pressure: 235 bar, Euroblech 2024 trade fair machine - Hamburg location. Pgodpfjttriajx Amuen