Used Bens 250 for sale (12,057)

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Kjdpfx Aeg Rcy Tjgronb -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg

Condition: good (used), Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm Knodpfxehqf Rnj Agrsb -Weight: 212 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece Kodpfx Agegv Nrkorsnb -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate Ksdpfxogp Tm Ss Agrsnb -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Condition: good (used), Year of construction: 2002, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats/blind production -Housing: material VA -Motors: 5x elsto 1.5 kW -Pressure: up to 250 bar -Flow rate: 10 l/min Knodpjpy Rx Tefx Agreb -Individual components: see photos -Dimensions: 2100/660/H1040 mm -Weight: 554 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats / blind production -Housing: material VA -Motors: 7x elsto 2.2 kW -Pressure: up to ca. 250 bar Kodpfx Aop Tbaajgrsnb -Flow rate: ca. 10 l/min -Individual components: see photos -Dimensions: 3000/560/H1000 mm -Weight: 380 kg

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves Kodpom At Iisfx Agrenb -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Year: 2021 Knjdpjh Rvpkofx Agrsb Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available Kodpfx Ageh R D Rdsrenb -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: used, Lever gauge, dial gauge, probe, probe -Manufacturer: Rekord, dial gauge weight -Measurement range: 0 - 250 kg -Dimensions case: 160/80/H35 mm Kodpsk Nfn Uofx Agronb -Weight: 0.4 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-125-250 S6 PPV -Stroke: 250mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm / M24 x 2 -Max. Pressure: 10 bars Knjdjiiwgispfx Agrsb -Dimensions: 530/140/H140 mm -Weight: 12.7 kg

Condition: used, Year of construction: 1984, Gear motor, electric motor -Manufacturer: Eberhard Bauer, gear motor type DO 42 F 04/141 -Speed: 250 rpm -Power: 110 W / 2700 rpm -Shaft: Ø 10 x 25 mm -Design: B5 -Protection class: IP55 -Number: 4x motor available Kedpfx Ajt Drkaogronb -Price per piece -Dimensions: 250/110/H110mm -Weight: 3.6 kg/piece

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Kjdpfst Hwzpex Agronb Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing Knodpfsu Sv Umox Agrsb -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

Condition: used, chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate Knsdpfx Agouypzvjrsb -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Inside: Ø 100 mm -Hole circle: Ø180 mm/ M10 / Ø230/10 mm -Dimensions total Ø 250 x 23 mm -Weight: 6.1 kg

Condition: used, TECHNICAL DETAILS - axes number : 3 CAPACITY - machining diameter : 250 [mm] - travels (X/Z) : 1600 / 300 [mm] - rapid feeds (X/Z) : 60 / 30 [m/min] SPINDLE - spindle nose : DIN55026 - size 6 - power : 18 / 22 [kW] - torque : 202 / 250 [Nm] - speeds : 0 - 6.000 [rpm] - indexing precision axis C : 0,001 [°] TURRET - number of positions : 12 - tool holders : VDI40 - number of rotary positions : 12 - rotary tools speed : 6.000 [rpm] - rotary tools power : 8,5 [kW] Knedpjuhbfyefx Agrsb MILLING HEAD - number of spindles : 6 - 5 HSK 50 spindles upon Ø : 107,95 [mm] - 1 HSK40 spindle : at center ELECTRICAL SUPPLY - voltage : 400 [V] - installed power : 45 [kW] DIMENSIONS - floor space : 4.550 x 2.810 [mm] - height : 3.600 [mm] - weight : 10.000 [kg] EQUIPMENT - control CNC SIEMENS 840D-sl - 3 colors status lamp - linear scales : HEIDENHAIN - automatic part loader with conveyor - chips conveyor - coolant tank * with pump 10 bars * with washing gun - coolant through spindle - IFS mist separator - collection of parts supports - collet chuck - 3 live tool-holders

Condition: good (used), Machine vice, vise Ksdpfx Aeb A Sr Hsgrenb -Jaw width: 250 mm -Jaw height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg

Condition: good (used), Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm Kedpfjb A Swzjx Agrenb -Outer diameter: Ø 250 mm -Width: 8 mm Price: per piece -Quantity: 100x available -Weight: 0.6 kg/piece

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm Knsdpfjb Enccjx Agrob -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Condition: new, Material number 16 Cr Mn 5 Width of centering groove: 32 mm Length: 90 mm Width: 60 mm Ksdpfx Ageb Rmx Hjrsnb Height: 54 mm

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm Knodpedt T I Defx Agrob -Passage: Ø 51 mm -Weight: 27 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Knedpfx Ajduab Nsgrob -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Knodpeduaciefx Agrsb -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm Knjdpfx Ajdxxrrsgrsb -Weight: 130 kg

Condition: used, Clamping angle for workpiece clamping Kedsdzd Hvopfx Agrsnb -Dimensions: W/H/L 250/775/245 mm -Thickness: 27 mm -Surface: milled -Thread holes: M16 -Number: 2x mounting brackets available -Price: per piece -Weight: 98.5 kg/piece