Used Bens 250 for sale (12,053)

Condition: good (used), mileage: 310,592 km, power: 184 kW (250.17 HP), first registration: 02/2019, fuel type: diesel, tire size: 285/70R29.5, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,900 kg, loading space length: 7,650 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Year of construction: 2019, Equipment: ABS, AdBlue, cruise control, onboard computer, tail-lift, = Additional Options and Accessories = - Cabin - Air suspension = Further Information = Axle configuration Suspension: Air suspension Front axle: Tire size: 285/70R29.5; Max. axle load: 5800 kg; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle: Tire size: 285/70R19.5; Dual tires; Max. axle load: 10900 kg; Tire tread depth left (inside): 70%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 70%; Tire tread depth right (outside): 70% Weights Kedpfezwmugsx Alfodt Unladen weight: 9,400 kg Payload: 6,600 kg GVWR: 16,000 kg Functional Tail lift: BAR, Rear door Refrigeration: 20 °C to 20 °C Body brand: Thermoking T-1200R Condition Technical condition: good Optical condition: good

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Kdodpfeylzhrox Alfot

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Kdjdjuiykdepfx Alfot

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Kdjdpfxouzn Nne Alfst Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, type plate available, Oil-Free Screw Compressor RENNER RSF 250 D – 250 kW – 45,000 l/min – Year 2015 Technical Specifications Kjdpfjzm Nhnsx Alfedt • Manufacturer: RENNER Kompressoren • Model: RSF 250 D • Year of manufacture: 2015 • Serial number: 545073 • Motor power: 250 kW • Air flow rate: 45,000 l/min (45 m³/min) • Working pressure: 7.5 bar • Maximum permissible pressure: 13 bar • Soundproofed enclosure • Electronic control with digital display • Fully automatic operation • Industrial design for continuous service

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm Kdsdpfx Aeztwr Ielfot #8503 Net price

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Year of manufacture: 2005 Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling. Ksdpfx Ajzidv Solfjdt

Condition: used, mileage: 212,170 km, power: 184 kW (250.17 HP), first registration: 08/2018, fuel type: diesel, empty load weight: 6,740 kg, maximum load weight: 5,250 kg, overall weight: 11,990 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 44 m³, loading space length: 7,270 mm, loading space width: 2,460 mm, loading space height: 2,490 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, trailer coupling, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales activities extend across national borders, which is why you will generally find the export price listed in our advertisements, as this price is independent of the location of use. Yourtrucks GmbH prepares the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed, individual consultation when making a purchase decision. Only the provisions included in the purchase contract are decisive. Changes, errors, typographical mistakes, and prior sale reserved. Our general terms and conditions apply exclusively. Kedpjy Igklofx Alfedt

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Kdedpfxjzrd U Hs Alfst Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: good (used), screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 250 pieces -Type: RSGU 11/15 D1 W1 -Clamping range: 11 mm Kdodpfov Awcpjx Alfjt -Band width: 15 mm -Quantity: 3x bags with 250 pieces available -Price: per bag -Bag dimensions: H60 mm -Weight: 2.5 kg/cart.

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Kdedpfevl Skgox Alfjt Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: refurbished (used), This versatile Rovema VPR 250 is the perfect solution for efficient and precise packaging. It is a ‘Second Life’ machine that has been fully refurbished to like-new condition. Suitable for both gusseted bags and pillow bags. Technical specifications: Brand/Model: Rovema VPR 250 Capacity: up to 120 packages per minute Size range (W×L): 70–250 mm × 80–350 mm Options: TTO printer, label dispenser, dosing unit, and more Warranty: 12 months Delivery time: On request Kedpfx Alsiwdhusfsdt Displayed at the Empack 2024 trade fair in Gorinchem

Condition: used, TECHNICAL DETAILS - Tool holder : HSK 40 - measuring range Z : 250 [mm] - measuring range X : 300 [mm] - swiveling diameter : 240 [mm] - max. tool weight : 20 [kg] Ksdpfx Alouhb Smsfsdt

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). Kdjdpfx Ajt Hwupelfet * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. Kdjdpjgp Diaofx Alfet b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Year of construction: 2012, condition: as good as new (ex-display), 2nd hand Fill and seal machine, VI-500 - Format : True Quad (Stabilo) bag wide, 200 mm breit x 100 deep, the machine was never in use in consequence the machine has zero working hours Kedpfx Aoff Hucslfsdt Also for sale: fill and seal machine - VI-250 - Format : 50 mm wide

Condition: ready for operation (used), Year of construction: 2010, operating hours: 122,000 h, functionality: fully functional, power: 250 kW (339.91 HP), number of cylinders: 8, Used combined heat and power (CHP) unit, manufactured in 2010, for sale, complete with container. MAN gas engine overhauled in 2024 (proof of overhaul available in the form of an invoice). Kodpfx Ajzkwc Ielfodt

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, 2-AXLE DRACO FRIGO TRAILER, CARRIER TRS ICELAND, 24 CC, TAIL LIFT (2021) Box: Cool/Freeze/Flowers, Frigo Martini Ebo Rhoon Chassis make and type: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: APK: ? 2025 FRC ATP: No Inside dimensions (l x w x h): 750 x 250 x 290 cm Drawbars adjustable length: 40 cm Empty weight: 6,090 kg Loading capacity: 11,910 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L30%, R30% Tyre profile axle 2: L30%, R30% Spare tyre trailer 445/45 30% Extras: Drawbar adjustable in length (40 cm), Carrier TRS Iceland refrigeration unit, Dhollandia 2,000 kg lift (Year of manufacture 2021!!), ABS, EBS, SAF axles with disc brakes, 2 toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load securing rail, Extra lights, Rear doors, Rear bumper, Ferry connections, 2x spare tyres, Complete service history available, Directly available and ready for work, Box is large enough for 24 CC (Danish trolleys), 14 standard pallets or 18 Euro pallets, etc. Further information: * Type | Front axle: Continental * Tyre size | Front axle: 445/45 R19.5 * Tyre tread depth inside left | Front axle: 20% * Tyre tread depth inside right | Front axle: 20% * Maximum axle load | Front axle: 9,000 kg * Type | Rear axle: Continental * Tyre size | Rear axle: 445/45 R19.5 * Tyre tread depth inside left | Rear axle: 40% * Tyre tread depth inside right | Rear axle: 40% Kdjdjztlkrepfx Alfot * Maximum axle load | Rear axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2,000 kg * Position | Front axle: Rear * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Tail lift | Type: Tilting and sliding tail lift Further equipment: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: Please inquire in advance about the costs and procedures in your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, mileage: 8,800 km, power: 150 kW (203.94 HP), first registration: 07/2024, fuel type: electric, overall weight: 3,500 kg, fuel: electricity, color: white, gearing type: automatic, suspension: steel, number of seats: 8, Equipment: ABS, air conditioning, airbag, central locking, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, E07 hill start assist, E7M MBUX multimedia system, JB7 Park Package with reversing camera, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, B25 electric parking brake, CM2 bumpers and add-on parts painted in vehicle color, FS5 illuminated mirrors for sun visors, J2A acoustic environment protection, RK8 7J x 17” alloy wheels, 20-spoke design, XO7 Mercedes-Benz Mobilo with DSB and GgD, T70 child safety locks on passenger compartment doors, T74 entry grab handle, UR1 seat rail system with quick-release function, CF9 basic chassis Plus, V33 carpeting in the rear, E1E Digital Extra: hard disk navigation, HH9 semi-automatic TEMPMATIC climate control, V36 roof lining, E1D digital radio (DAB), Y10 first aid kit, IB6 model series C447 Vito/V-Class, 805 AEJ X4/1, ES2 12V socket in boot/cargo area, VD5 headliner in crystal gray, E1T touchpad, H00 warm air duct to passenger compartment, F3Z comfort closing, IK3 luxury combi, HI1 climate zone 1 (cold/comfort), XY5 model year 5, US5 comfort 3-seater bench, 2nd row, outer seat foldable, US4 comfort 3-seater bench, 1st row, outer seat foldable, V44 carpet flooring in front interior, W65 tailgate, C6L multifunction steering wheel, RM4 comfort tires, Z42 registration as passenger car, LA2 light assistant, RM7 summer tires, HZ0 electric auxiliary heater, ET4 active distance assist DISTRONIC, J55 seatbelt warning system for passenger seat, XZ2 model generation 2, EL9 2-way speakers front and rear, ED4 fleece battery 12V 92Ah, T14 active latch sliding door, W78 ., We are happy to offer you a customized financing or leasing option and will take your used vehicle in part-exchange. We look forward to welcoming you for further consultation at our dealership. Vehicle condition according to age/mileage; secondary paintwork was carried out on the vehicle as part of the reconditioning process. No liability for print or typographical errors. Subject to error and prior sale ... more on our homepage. Kjdoxnvudopfx Alfedt

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Kodpfxjzi R R Nj Alfedt Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: used, mileage: 16,460 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electric window lifters - left Kdsdpfx Aoy Arurjlfet - Electric window lifters - right - Driver airbag - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz entry sill strip, CA3 Active Steering Assist, CF8 Sports suspension, CK8 Steering wheel heating, CL1 Steering wheel adjustable for tilt and height, CL3 Leather steering wheel, CM2 Bumpers and exterior trim panels painted in vehicle color, CU4 Aerodynamics package, D12 Roof rails, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation, E1T Touchpad, E2Q MBUX Augmented Reality for navigation, E4S Smartphone integration package, E7H MBUX Multimedia System High, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk/cargo area, ES3 12 V sockets for rear seat rows right and left, ET4 Active Distance Assist DISTRONIC, F1O Center console with storage compartment + cup holder, medium version, F2W Winter package, F3T Decorative elements in wood-look olive dark gray, open-pore, F3Z Comfort closing, F48 Heating for windshield washer system, F65 Exterior mirrors, automatically folding, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated with integrated turn signal, F71 Interior mirror, automatically dimming, FG9 Cup holder that can be attached to the armrests in the rear, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, 00 Warm air duct to the passenger compartment, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HZ7 Air conditioning system, semi-automatic control, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JH0 Widescreen cockpit, JM2 Extended automatic restart on highways, JM3 Route-based speed adaptation, JM4 Active Speed Limit Assist, JP1 PRE-SAFE, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, KB5 Main tank 70 liters, L45 MULTIBEAM LED with High Beam Assist PLUS, LA2 Headlight Assist, LB9 Exit lights, LC4 Comfort roof control unit, LC5 Ambient lighting in the exterior mirrors, LC6 Illuminated handle in the rear with reading spot, LC7 Lighting for front footwell, LC8 Ambient lighting tailgate, LE1 Adaptive brake light, LE3 Ambient lighting 64 colors cockpit + rear, LE6 Night lighting rear, LG4 Tail lights, brake lights and turn signals in LED technology, MJ8 ECO Start-Stop function, MO5 EMISSIONS CLASS EURO 6e, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, MX0 BlueEFFICIENCY package, P28 EASY PACK package electric sliding door/tailgate, Q50 Trailer coupling ball head, removable, QA4 Trailer load 2500 kg, R19 Light alloy wheels 8 J x 19, monobloc design, RY2 Tire pressure monitoring system for front and rear axles, wireless, S37 Armrests outside for individual seats 2nd row of seats, SA1 Seat cushion depth adjustment driver, SA2 Seat cushion depth adjustment passenger, SA3 Center airbag, ... Metallic paint, Alloy wheels, Electric immobilizer, ESP, Navigation system, Particulate filter, Warranty, Rain sensor, Electric side mirrors, Sports suspension, Bluetooth, On-boa

Condition: used, mileage: 187,000 km, power: 188 kW (255.61 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,400 mm, total width: 2,550 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2021, Equipment: ABS, navigation system, tail-lift, Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Max. axle load: 5000 kg; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 8480 kg; Tyre profile left inner: 80%; Tyre profile left outer: 8%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Weights Empty weight: 8.104 kg Carrying capacity: 3.896 kg GVW: 12.000 kg Maintenance APK (MOT): tested until 11/2026 Kjdozvd Dpepfx Alfjdt Financial information Price: On request Identification Registration number: 49-BSG-5 = Additional options and accessories = - Lat to lath timbered - Radio - Roof and side spoiler - Spotlights = Remarks = Comfort cabine 2x Air suspended seat Type 2 tacho Hardwooden floor Isolated roof Volvo dealer maintained

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 1998 Characteristics: Kdodsvyrq Aepfx Alfet Capacity 7.50 bar Power 245 kW Voltage 500 V

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Kdjdpjvamqdsfx Alfst

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Kdedpfx Aley U Nqnjfet