Used Hurlimann H-657 Xa for sale (25,511)

Condition: used, Year of construction: 1977, VA kieselguhr filter 100 x 100 H&K brand with hydraulic pressure Material: Stainless Steel Lhodpexbpk Sjfx Af Sjr Features: Kieselguhr discharge pump, manufacturer Allweiler, type SNP 2002, H4P1; Q L/min: 100; Nl(min) 280; flange connections inlet DN 100, outlet DN 80; length 1.9 m Kieselguhr discharge container with screw (diameter 22 cm) and drive motor; motor 1.1 kW, 1,420 rpm; outlets: DN 100 (kieselguhr), DN 65 (liquid); overall dimensions: 2.85x1.195x0.615 m (LxWxH)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Lhodst Ngfijpfx Af Ser

Condition: new, functionality: fully functional, Year of construction: 2023, LOT OF NEW SAFETY VALVES 4 x 511ARN DN25 PN40 / DN40 PN16 4 x 571ARN DN25 PN40 / DN40 PN16 A216WCC WITH VALVES 1 x 571ARN DN32 PN40 / DN32 PN16 A216WCC WITH VALVES Lhsdpfxjw Eph Ue Af Ssr 1 x 110ARN40 DN40 PN40 / DN65 PN16 A216WCC 1 x 120ARNH100 DN100 PN40 / DN150 PN16 A216WCC 1 x 511IRN DN25 PN40 / DN32 PN16 CF8M 1 x LOW PRESSURE REDUCER LPRI-025D-04-N20-SKA-L-A2

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm coil weight: max. 7 t mandrel Ø: 508 mm Ljdpfxorazyqs Af Sshr

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: Lhodsr Igtyjpfx Af Ssr 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, Year of construction: 1975, turning diameter over bed 430 mm turning diameter over slide rest 340 mm turning length 1500 mm turning speeds 19 -2000 U/min centre height 215 mm spindle bore 56 mm Ledswu Hi Iepfx Af Sshr total power requirement 5,5 KW weight of the machine ca. 2,3 t dimensions of the machine ca. 3,65 x 1,4 x 1,7 m Center lathe - Digital display - Forkardt 3-jaw chuck F 250 - IDEAL quick-change tool post - Live center - Coolant system - Emergency stop device

Condition: used, Year of construction: 1977, VA sheet filter 100 x 100 H&K brand with hydraulic pressure Additional title: sterilisation filter Capacity: 120 hl/h Length: 4,4 m Width: 1,425 m Lodoxbphqopfx Af Sehr Height: 1,6 m

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting Lhedpfx Ajdzc Rxsf Ssr 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, functionality: fully functional, Year of construction: 2023, SET OF 2 NEW STAINLESS STEEL SAFETY VALVES, NEVER INSTALLED. DN250 / DN150 PN16 Ljdpfjw Dvz Sjx Af Sohr

Condition: good (used), Year of construction: 2002, Number of boring spindles 4 St. Ledpfsu N Iwnjx Af Sjhr Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 0,75 kW

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Lhjdsr Igtkopfx Af Sor Very good condition, see pictures Shipping by courier or collection by appointment

Condition: excellent (used), Standard boiler 30 t/h. Year of manufacture: 2012. Equipped with two oil burners. Lhsdjxgn Itopfx Af Sor

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress Hauser, conductivity transmitter -Type: conducta XR 2 -100434-0100 -Measuring range: 0 to 100% -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg Ljdpfx Afeldk I Do Sshr

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) Lhsdpfxedzc Rfe Af Ssr 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack Lhodpfx Asf Tdt Ief Sjr -Manufacturer: HL, hydraulic unit for hydraulic punch -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW/1455 rpm -Nominal pressure: bar -Liter output: l/min -Pressure display: up to 250 bar -Pressure accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Maximum wall panel height 3500mm Lhodpfx Afsfqmtko Sor One man operation Weight of unit 80kgs

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump -Max. Pressure: approx. 200 bar -Litre capacity: approx. 6 l/min Lsdpeb Uhqdjfx Af Sohr -Hydraulic tank: liters -Hydraulic valve: -Dimensions: mm -Weight: 36kg

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Ljdpfsb Tmrvox Af Sohr Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz Lsdpfx Ajldk Ikjf Sehr -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Lhjdjpahmhjpfx Af Sor Optional 2m infeed and outfeed tables

Condition: used, Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm Ljdpju S Tc Eefx Af Sjhr -Weight: 8.3 kg

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Lhedpon Up R Iefx Af Ssr 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: used, Sample gas cooler -Measuring gas cooler with: protective lining Lhedpfxodnca Hj Af Sor -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Condition: used, Door hold-open magnet, door magnet, hold-open magnets, fire door -Type: GT 50 A 002 -Voltage: 24 V 5 W. -Holding force: 750 N -Number: 15x magnets available -Price: per piece -Dimensions: Ø 50 x 30 mm Lhedpfxocb T R Es Af Ser -Weight: 0.35 kg

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel Ledpsdpar Iefx Af Sjhr -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm -Dimensions: 144/144/H90 mm -Weight: 1.2 kg