Used Hurlimann Xa 607 for sale (743)

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Nljdpfet Hal Dex Adlsh Hairdryer group

Operating hours: 607 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,400 mm Fork length: 1,150 mm Mast: Duplex free-lift mast Initial lift: capable of lifting 2 pallets simultaneously MACHINE DETAILS Manufacturer: Linde Type: D12AP Year of manufacture: 2020 Operating hours: 607 h Own weight: 1,400 kg Overall length: 2,100 mm Overall width: 800 mm Overall height: 1,660 mm Battery: 24 V, 3 PzS, 375 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 25.0 V Battery water refilling system: Aqua EQUIPMENT Initial lift Folding platform Previously a Linde full-service unit Functional and condition video All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: * Side loading up to 6 t possible with a large forklift truck on site. Loading is at your own risk. * Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Nledpfx Adjz R Rc Uolsh * If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 410

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Nledpfx Ajz Rqk Rsdljh Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: excellent (used), operating hours: 9,500 h, functionality: fully functional, track width: 2,870 mm, year of last overhaul: 2026, total width: 3,100 mm, number of previous owners: 1, Equipment: crane, low noise, Manufacturer: BALJER / Zembrod Type: AS/28H-R.D - ES122 11 kW connected load Year of manufacture: 1994 Cutting length… Operating hours: 9500 Outreach: 12 m Very good condition, Tracks approx. 60 m (included) Nlsdpfo Afzzuex Adleh With trailer.

Condition: used, Year of construction: 2017, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control Celos 840 D SL Operate Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW Torque 130 / 86 Nm tool taper HSK-A63 b - axis +-100 ° table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 120 pos. Nedpfx Ads Afpzielolh tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 67 kVA weight of the machine ca. 16,24 t dimensions of the machine ca. 8,0 x 5,6 x 2,9 m CNC - Travel Column Milling Machine DMG MORI - DMF 260 - 7 - NC tilting milling head (B-axis ±100°) - Balluff BIS C tool identification system -> One read/write head each at the tool loading/unloading station -> Evaluation unit -> CNC software -> Balluff chips NOT included! - incl. workspace partition - MPC (Machine Protection Control) - ATC (Application Tuning Cycle) - Dual changeover filter (25 µm) - Bed flushing / door flushing system (includes additional pump) - 2D surface feature (as an add-on to ATC) - EES (Extended Editing System) option - Provision for refilling the internal coolant supply (ICS) system - Provision for vacuum clamping - Clamping devices and machine vises NOT included!

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Max Panel Thickness: 35 mm Nlsdpozvwp Eofx Adlsh Max feed speed: 30 m/min Distance between dogs: 320 mm

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Nlsdpfx Aju Rfh Tsdlsh Control unit Basis HH 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Y-travel 600 mm Z-travel 600 mm Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Spindle holder 63 HSK- Total power requirement 50 kVA Machine weight 12 to. Space requirement 9x2x2.7 m

Condition: used, Year of construction: 1998, machine/vehicle number: CC20, Hot-melt Case Sealer – OverviewThis used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput.Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection.Technical Specifications & Performance DataManufacturer: TE-COModel: 607-98Year of manufacture: 1998Speed: 6.000 BPH ( bottle per hour)Sealing method: Hot-melt (glue) adhesiveApplication: Case/carton sealing after case packingTypical use: Wine bottle cases within a used bottling lineCompatible bottle formats in cases: 0.75L, 1.0L, 1.5LConstruction: Industrial end-of-line machine for continuous operationOperation: Inline with case packer upstream and palletizer downstreamAdvanced Automation & Control SystemsThe TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing.Production Line Integration CapabilitiesThis case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed.Machine Condition & Maintenance HistoryThe machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments.Operational Performance & VersatilityOptimized for sealing cartons that contain glass bottles, this TE-CO 607-98 suits wineries and beverage producers requiring secure hot-melt closure. The adhesive system promote... Nlsdpexywf Iefx Adlsh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; Nledpfxez Rxcze Adleh operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; engine: KUBOTA; compressor in fully working condition. net price: PLN 57,500 gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2021, 2021 Bystronic Xact Smart 225/4100 CNC Press Brake with Bystronic ByVision Controller Thrust: 225 T. Maximum working length: 4,100 mm. Maximum stroke: 200 mm. Rapid traverse speed: 140 mm/s. Working speed: 1–10 mm/s. Return speed: 115 mm/s. S.No: XACT21278SE (2021). Note: Machine located in Czestochowa, Poland. Nsdpfxj Ad Dpls Adlslh Machine weight: 15,000 kg.

Year of construction: 2021, condition: used, machine/vehicle number: AT95, Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existing used bottling line layoutsAdvanced Automation & Control SystemsThe POSIFLEX-A-20 is built for automated operation with coordinated control of the hopper, orienting system, and discharge. Operators benefit from intuitive control interfaces and precise speed regulation to match downstream equipment, improving changeover efficiency and minimizing stops.Integrated control panel for speed and function managementAutomated bottle orientation with high repeatabilitySensor-based jam detection and bottle flow monitoringRecipe-friendly setup for rapid format adjustmentDesigned for continuous-duty operation in industrial packaging environmentsProduction Line Integration CapabilitiesThis unscrambler integrates seamlessly at the head of a beverage production line, feeding containers to air or tabletop conveyors leading to rinsing, filling, capping, and labeling machines. It supports standalone or inline operation and can be configured to accommodate a wide range of bottle sizes.Compatible with standard conveyor interfacesFlexible layout options for compact or extended linesFormat change capability for different bottle heights and diametersSuitable for integration into water, juice, wine, beer, and general beverage production processesMachine Condition & Maintenance HistoryBuilt in 2021, this second hand unit presents a modern design life and is offered in ready-for-operation condition. Its contemporary engineering and CE-compliant construction make it a strong candidate for facilities seeking to expand or modernize their used bottling line with minimal risk and reduced commissioning time.Operational Performance & VersatilityEngineered for stable performance at up to 100 bpm, the POSIFLEX-A-20 provides gentle bottle handling, consistent orientation, and smooth discharge to conveyors. This enhances downstream efficiency by reducing starved or blocked infeed conditions at rinsers, fillers, and labelers, improving overall line OEE.Gentle handling for lightweight bottlesConsistent bottle orient... Nedo Adt Nuepfx Adljlh

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V Nedpfx Aowd N S Djdlslh -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V Nodpfx Adoxaat Uslolh total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: ready for operation (used), Bosch TR15II-XA-230 / Transistor amplifier SN: 699293, used, good condition, 100% functional, delivery as shown in photos. Nledpjy Rckajfx Adljh

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, ZELAIETA TXA ROLL TOP 1000 – DIVIDER FOR HIGH-HYDRATION DOUGH Manufacturer: Zelaieta Model: TXA Roll Top 1000 Working width: approx. 1,000 mm Industrial divider designed for processing fermented and highly hydrated dough, especially for the production of ciabatta, rustic breads, and similar products. The dough is fed and gradually laminated by a roller system, allowing for maximum preservation of the dough’s structure and air pockets before the cutting phase. The machine enables continuous and consistent production, with adjustment of the dough thickness and adaptation of the cutting dimensions according to the desired product. Nsdpfx Aez Ihzasdljlh Particularly suitable for industrial lines seeking gentle dough processing with minimal mechanical stress. Possible applications: - Ciabatta - Rustic breads - Rectangular breads - High-hydration doughs - Fermented dough products Robust construction in stainless steel, suitable for intensive industrial use.

Condition: used, Year of construction: 2007, operating hours: 2,408 h, load capacity: 2,400 kg, lifting height: 5,300 mm, fuel type: diesel, Equipment: cabin, JCB 524-50 telescopic handler from 2007 with only 2,804 operating hours! ---- * Manufacturer: JCB * Model: 524-50 Njdpfxs Ad Trie Adlslh * Year of manufacture: * Operating hours: approx. 2804 * Ex-military! * With pallet forks * Includes 1 spare wheel and 1 toolbox (see photos) * Load capacity: approx. 2,400 KG * Lifting height: approx. 5.3 meters * Video available upon request * Good condition * First owner! * Weight: 5,500 KG * Price: EUR 23,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp ?All information is provided without warranty, errors and prior sale excepted.

Condition: used, Year of construction: 2020, general refurbished, very good condition with preevacuation filling valves: 16 working direction: right-left (CCW) Njdpfxsz S Rb Ss Adljlh

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Nlsdpfxoz At Abs Adljh Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: used, Year of construction: 2006, machine/vehicle number: 65126, Grinding area: 630x350 mm, grinding wheel diameter: 350 mm, magnetic clamping plate, size: 600x300 mm, with coolant system, fleece filter system and automatic depth feed. Nedpfx Aez Nhqxsdlslh

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition. Swinging diameter over the bed: 500 mm Distance between centers: 780 mm X-axis travel: 200 mm Y-axis travel: 80 mm Control system: Siemens 840 Nsdpfe Abxwfsx Adljlh Total operating hours: 26,501 h Max. turning length: 500 mm Maximum turning diameter: 200 mm Turning diameter over the bed (max): 500 mm Distance between centers: 780 mm Maximum spindle speed: 6000 rpm Workpiece weight: 45 kg Weight: 4500 kg Filtration system Includes a CNC Spacesaver SS 2500 bar feeder (2018) Inspection in operation is possible by prior arrangement.

Condition: excellent (used), axle configuration: 3 axles, first registration: 02/2009, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, color: other, Year of construction: 2009, Equipment: tail-lift, = Additional options and accessories = - Rear doors - Tailgate = More information = Tail lift: dhollandia DHSV20, slider lift, 1500 kg Technical condition: very good Visual appearance: very good Registration number: CW306HJ = Dealer information = Nlsdpfx Adsz Sd N Doleh Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Output power and output current: 132kW | 260A ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 1 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use. Nsdporakqmjfx Adlslh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ATLAS COPCO XAHS408 STAGE5 mobile compressor with an aftercooler, fully serviced. The machine comes with documentation for registration. Technical data: capacity: 24.0 m3/min; working pressure: 12 Bar; year of manufacture: 2020; engine: CUMMINS 187KW; operating hours: 971h; The compressor is in perfect working order, ready for operation, and comes with a warranty. Nljdpo Ad E Hxjfx Adljh Net price: 245,000 PLN Gross price: 301,350 PLN The machine is in excellent condition. Links to videos are provided below.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2007, total length: 9,580 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007 Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Nsdps Afc Szefx Adlolh Empty weight: 3.720 kg Carrying capacity: 35.280 kg GVW: 39.000 kg APK (MOT): tested until 02/2027 Registration number: OJ-98-VX

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2007, total length: 9,580 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007 Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.720 kg Carrying capacity: 35.280 kg Nledpj Afc Susfx Adljh GVW: 39.000 kg APK (MOT): tested until 03/2027 Registration number: OJ-94-VN